A Novel Chipless Hybrid RFID Sensor for Metal Crack Detection
Source abstract
Abstract
RFID technology has been widely researched and used for structural health applications because of its compact, wireless, and scalable nature. This technology is divided into chipped and chipless sensors. Chipped sensors are costly due to their chipped tags, have narrowband operations, and contribute to shortcomings in detection capability. Chipless tags provide real-time monitoring of cracks in harsh environments like high-temperature areas and high electromagnetic interference areas. This paper presents a design of a novel chipless hybrid circular-hexagon sensor that uses the frequency signature-based method for metal crack detection and characterization using wideband frequency. This sensor is small in size (16 mm × 16 mm × 1.4 mm) and easily mountable in hard-to-reach areas. It is a low-cost, passive chipless sensor that can wirelessly monitor the cracks in metallic structures. The radar cross-section of the chipless tag shows a shift in the resonant frequency of the tag under crack and no crack conditions. Key contributions of this work are that through simulations and experimental investigation, the tag is shown to be able to detect mm-scale cracks, validating the concept and correlating the presence and size of the cracks based on the shift in resonant frequencies in which a pair of Vivaldi antennas are used as a transmitter and receiver to connect to the VNA. The designed small sensor tag is tested in a benchtop setup with no prior calibration, imitating the real-time environment conditions for crack detection.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: RFID technology advancements · Modular Robots and Swarm Intelligence · Indoor and Outdoor Localization Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical and Computer Engineering, Michigan State University, East Lansing, MI 48824, USA
Department of Civil and Environmental Engineering, Michigan State University, East Lansing, MI 48824, USA
References (65)
Show source-provided references
1. An overview of wireless structural health monitoring for civil structures
2. Size effect on fatigue in bending of concrete10.1061/(ASCE)0899-1561(2001)13:6(446) ↗
3. Structural Health Monitoring of Bridges Using Wireless Sensor Networks10.1109/MIM.2010.5669608 ↗
4. Smart coating sensor applied in crack detection for aircraft10.4028/www.scientific.net/AMM.330.383 ↗
5. Automated crack detection on concrete bridges10.1109/TASE.2014.2354314 ↗
6. Munawar, H.S., Hammad, A.W., Haddad, A., Soares, C.A.P., and Waller, S.T. (2021). Image-based crack detection methods: A review. Infrastructures, 6.10.3390/infrastructures6080115 ↗
7. Crack detection in railway track using image processing
8. Novel dynamic fatigue-testing device: Design and measurements10.1088/0957-0233/17/8/023 ↗
9. Azimi, M., Eslamlou, A.D., and Pekcan, G. (2020). Data-driven structural health monitoring and damage detection through deep learning: State-of-the-art review. Sensors, 20.10.3390/s20102778 ↗
10. Jiao, P., Egbe, K.J.I., Xie, Y., Matin Nazar, A., and Alavi, A.H. (2020). Piezoelectric sensing techniques in structural health monitoring: A state-of-the-art review. Sensors, 20.10.3390/s20133730 ↗
11. The state of the art in structural health monitoring of cable-stayed bridges10.1007/s13349-015-0115-x ↗
12. Development of generic AI models to predict the movement of vehicles on bridges10.1016/j.prostr.2024.09.307 ↗
13. An overview on structural health monitoring: From the current state-of-the-art to new bio-inspired sensing paradigms
14. Sonbul, O.S., and Rashid, M. (2023). Towards the structural health monitoring of bridges using wireless sensor networks: A systematic study. Sensors, 23.10.3390/s23208468 ↗
15. Reber, K., Beller, M., Willems, H., and Barbian, O. (2002, January 8–11). A new generation of ultrasonic in-line inspection tools for detecting, sizing and locating metal loss and cracks in transmission pipelines. Proceedings of the IEEE Ultrasonics Symposium, Munich, Germany.
16. Rail crack detection and evaluation at high speed based on differential ECT system10.1016/j.measurement.2020.108152 ↗
17. Crack detection and characterization techniques—An overview10.1002/stc.1655 ↗
18. Review and analysis of crack detection and classification techniques based on crack types
19. Differential ECT probe design and investigation for detection of rolling contact fatigue cracks with different orientations10.1109/JSEN.2022.3170598 ↗
20. A review on five key sensors for monitoring of concrete structures10.1016/j.conbuildmat.2019.01.172 ↗
21. IoT technology, applications and challenges: A contemporary survey10.1007/s11277-019-06407-w ↗
22. Sharma, N., Shamkuwar, M., and Singh, I. (2019). The history, present and future with IoT. Internet of Things and Big Data Analytics for Smart Generation, Springer.10.1007/978-3-030-04203-5_3 ↗
23. NDE 4.0: Progress, promise, and its role to industry 4.010.1016/j.ndteint.2023.102957 ↗
24. IoT for structural health monitoring10.1109/MIM.2018.8573586 ↗
25. Passive UHF RFID antennas for sensing applications: Principles, methods, and classifications10.1109/MAP.2013.6781700 ↗
26. Liu, G., Wang, Q.A., Jiao, G., Dang, P., Nie, G., Liu, Z., and Sun, J. (2023). Review of wireless RFID strain sensing technology in structural health monitoring. Sensors, 23.10.3390/s23156925 ↗
27. Effective RFID-based object tracking for manufacturing10.1080/09511920701805519 ↗
28. Accurate and efficient object tracking based on passive RFID10.1109/TMC.2014.2381232 ↗
29. A review of RFID in supply chain management: 2000–201510.1007/s40171-016-0136-2 ↗
30. Critical success factors and challenges of implementing RFID in supply chain management
31. RFID technology for food industry 4.0: A review of solutions and applications10.1109/JRFID.2023.3278722 ↗
32. Overview of RFID technology and its applications in the food industry10.1111/j.1750-3841.2009.01323.x ↗
33. Chakaravarthi, G., Prasath, K., Jayaganthan, R., Velmurugan, R., and Arunachalam, K. (2019, January 22–24). A passive UHF RFID tag for wireless fracture toughness measurement on metals. Proceedings of the TEQIP III Sponsored International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW), Tiruchirappalli, India.10.1109/IMICPW.2019.8933255 ↗
34. Identification and characterisation of steel corrosion using passive high frequency RFID sensors10.1016/j.measurement.2016.06.041 ↗
35. Facilities based on passive RFID sensors on growth and physiological characteristics of Lycium barbarum seedlings10.1016/j.measurement.2020.108385 ↗
36. Bhattacharyya, R. (2024, November 10). Low-Cost, Passive UHF RFID Tag Antenna-Based Sensors for Pervasive Sensing Applications. Available online: https://dspace.mit.edu/handle/1721.1/73791.
37. RFID technology and its diverse applications: A brief exposition with a proposed Machine Learning approach10.1016/j.measurement.2022.111197 ↗
38. Measuring bulk material flow—Incorporating RFID and point cloud data processing10.1016/j.measurement.2022.111598 ↗
39. Reusable Passive Wireless RFID Sensor for Strain Measurement on Metals10.1109/JSEN.2018.2831903 ↗
40. Capacitively-coupled dual ring antennas for bolt loosening detection10.1016/j.measurement.2022.111605 ↗
41. Design of an RFID-based battery-free programmable sensing platform10.1109/TIM.2008.925019 ↗
42. RFID tag antenna-based sensing for pervasive surface crack detection10.1109/JSEN.2013.2240155 ↗
43. Wireless passive RFID crack width sensor for structural health monitoring10.1109/JSEN.2015.2457455 ↗
44. Passive RFID sensor systems for crack detection & characterization10.1016/j.ndteint.2016.11.002 ↗
45. Passive wireless antenna sensor for strain and crack sensing—Electromagnetic modeling, simulation, and testing10.1088/0964-1726/22/8/085009 ↗
46. Chipless RFID: Bar code of the future10.1109/MMM.2010.938571 ↗
47. Hold the chips: Chipless technology an alternative technique for RFID10.1109/MMM.2013.2259393 ↗
48. Karmakar, N.C., Amin, E.M., and Saha, J.K. (2016). Chipless RFID Sensors, John Wiley & Sons.10.1002/9781119078104 ↗
49. Chipless RFID sensors for wearable applications: A review10.1109/JSEN.2021.3126487 ↗
50. Fully printable chipless RFID multi-parameter sensor10.1016/j.sna.2016.06.014 ↗
51. Liu, L., and Chen, L. (2022). Characteristic analysis of a chipless RFID sensor based on multi-parameter sensing and an intelligent detection method. Sensors, 22.10.3390/s22166027 ↗
52. Dey, S., Kalansuriya, P., and Karmakar, N.C. (2014, January 15–17). Chipless RFID based high resolution crack sensing through SWB technology. Proceedings of the 2014 IEEE International Microwave and RF Conference (IMaRC), Bangalore, India.10.1109/IMaRC.2014.7039040 ↗
53. Chipless RFID sensor tag for metal crack detection and characterization10.1109/TMTT.2017.2786696 ↗
54. A novel “smart skin” sensor for chipless RFID-based structural health monitoring applications10.1109/JIOT.2020.3026729 ↗
55. Balanis, C.A. (2016). Antenna Theory: Analysis and Design, John Wiley & Sons.
56. Design and Analysis of Irregular Hexagonal Patch Antenna Using Multiport Network Model (MNM)10.1155/2024/8343100 ↗
57. Metal crack detection sensor based on microstrip antenna10.1109/JSEN.2023.3246591 ↗
58. Wireless passive sensor based on microstrip antenna for metal crack detection and characterization10.1088/1361-6501/ab068a ↗
59. Reducing mutual coupling in chipless RFID tags composed of U-folded dipole scatterers10.1002/mop.30138 ↗
60. Design of hexagonal patch antenna for mobile wireless system
61. Li, M., Wan, G., Yang, M., and Tong, M. (2019, January 17–20). A Chipless RFID Sensor for Metal Crack Detection Based on Notch Characteristics. Proceedings of the 2019 Photonics & Electromagnetics Research Symposium–Fall (PIERS–Fall), Xiamen, China.10.1109/PIERS-Fall48861.2019.9021878 ↗
62. Kumar, C., and Patre, S. (2021, January 6–8). Array of chipless RFID sensor tag for wireless detection of crack on large metallic surface. Proceedings of the 2021 IEEE International Conference on RFID Technology and Applications (RFID-TA), Delhi, India.10.1109/RFID-TA53372.2021.9617264 ↗
63. Chipless RFID Multisensor for Temperature Sensing and Crack Monitoring in an IoT Environment10.1109/LSENS.2021.3083218 ↗
64. Chantasen, N., Shutimarrungson, N., Boonpoonga, A., Bannawat, L., and Akkaraekthalin, P. (2022, January 4–5). Metal Crack Detection with Chipless RFID Sensor using Shot-Time Matrix Pencil Method. Proceedings of the 2022 Research, Invention, and Innovation Congress: Innovative Electricals and Electronics (RI2C), Bangkok, Thailand.10.1109/RI2C56397.2022.9910285 ↗
65. Wang, B., and Liu, Z. (2024, January 4–7). Chipless RFID Sensors for Crack Angle and Direction Detection. Proceedings of the 2024 IEEE International Conference on Mechatronics and Automation (ICMA), Tianjin, China.10.1109/ICMA61710.2024.10632994 ↗