Influence of Solution Treatment Temperatures on LPBF-Produced Inconel 939 Alloy on Mechanical Performance

This study investigates the influence of solution treatment temperatures on the microstructure and mechanical properties of LPBF (Laser Powder Bed Fusion)-manufactured Inconel 939 alloy. The primary objectives are to assess the impact of sub-recrystallization (below recrystallization temperature) and recrystallization temperatures during solution treatment on mechanical performance under different conditions. This study validates the hypothesis concerning carbide redistribution and mechanical performance in LPBF-produced Inconel 939 parts through comprehensive analysis, including microstructure studies and tensile tests. The results indicate that higher heat treatment temperatures lead to significant changes in carbide redistribution and mechanical performance. For instance, at room temperature, the specimen with sub-recrystallization solution treatment temperature exhibited superior mechanical properties compared to both the as-built and recrystallization-temperature solution treatment specimens. However, at elevated temperatures (700 °C), a reversal in mechanical anisotropy was observed, with the vertical axis demonstrating higher tensile strength compared to the horizontal axis for all material states. Furthermore, a microstructural analysis revealed distinct changes in grain structure and precipitate distribution, particularly the migration of carbides from grain boundaries to intragranular regions. These findings underscore the importance of precise control over heat treatment parameters to achieve optimal mechanical behavior. This research provides valuable insights into optimizing LPBF processes for the Inconel 939 alloy, highlighting the need for a meticulous control of the solution treatment parameters to ensure mechanical integrity. The findings contribute to a broader understanding of material-specific responses in additive manufacturing, with significant implications for aerospace applications.