Enhanced strength and crack resistance in CoCrNi-based medium entropy alloy with nano-precipitates, 9R structures and nanotwins produced by hot isostatic pressing
Source abstract
Abstract
In the present study, hot isostatic pressing (HIP) subjected to high intermediate cooling rate is exploited to seal keyholes and tune the microstructure of equiatomic CoCrNi and (CoCrNi) 94Al 3Ti 3 medium entropy alloys (MEAs) prepared by spark plasma sintering (SPS). For equiatomic CoCrNi, fracture toughness (K IC) is significantly increased but the yield strength ( σ 0.2 ) is almost constant when the relative density is increased from 98.9% to 99.7% by HIP. By contrast, σ 0.2 and K IC of (CoCrNi) 94Al 3Ti 3 are considerably advanced by 27.3% and 38.6%, respectively. Meanwhile, the change of grain size introduced by HIP treatment is very inconspicuous in present study. Obvious plastic deformation traces are observed near the crack in the samples subjected to HIP treatment. Systematic microstructure observations indicate that the nano-precipitates and the concurrent of the long split 9R structure and nanotwins in (CoCrNi) 94Al 3Ti 3 formed during HIP treatment are responsible for the enhancement of σ 0.2 . The formation mechanisms of 9R phase in terms of the hierarchical architecture twins and dislocations activity are explored. Our findings offer new insights on design and processing of MEAs parts by the powder metallurgy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Microstructure, mechanical properties and tribological performance of CoCrFeNi high entropy alloy matrix self-lubricating composite10.1016/j.matdes.2016.11.072 ↗
2. High-entropy alloys10.1038/s41578-019-0121-4 ↗
3. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
4. Enhancing the strength-ductility trade-off in a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra-fine precipitates, stacking faults, dislocation locks and twins10.1016/j.scriptamat.2021.114497 ↗
5. Achieving excellent strength-ductility synergy in twinned NiCoCr medium-entropy alloy via Al/Ta co-doping10.1016/j.jmst.2021.01.060 ↗
6. Phase transition and heterogeneous strengthening mechanism in CoCrFeNiMn high-entropy alloy fabricated by laser-engineered net shaping via annealing at intermediate-temperature10.1016/j.jmst.2021.03.028 ↗
7. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
8. Atomistic simulations of tensile deformation in a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.mtla.2019.100565 ↗
9. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
10. Ultrastrong and ductile (CoCrNi)94Al3Ti3 medium-entropy alloys via introducing multi-scale heterogeneous structures10.1016/j.jmst.2022.06.048 ↗
11. Fundamental aspects of hot isostatic pressing: an overview10.1007/s11661-000-0078-2 ↗
12. Microstructure and properties of SLM-Hastelloy X alloy after different hot isostatic pressing + heat treatment10.1016/j.msea.2022.143714 ↗
13. Contribution of hot isostatic pressing on densification, microstructure evolution, and mechanical anisotropy of additively manufactured IN718 Ni-based superalloy10.1016/j.msea.2021.141721 ↗
14. Effect of hot isostatic pressing on the cast Ti6Al4V alloy with shrinkage cavities inside: healing behavior, microstructure evolution and tensile property10.1016/j.msea.2021.142496 ↗
15. Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing10.1016/j.actamat.2017.04.068 ↗
16. Mechanical and microstructural characterization of powder metallurgy CoCrNi medium entropy alloy10.1016/j.msea.2017.06.086 ↗
17. Effect of hot isostatic pressing on the cryogenic mechanical properties of CrCoNi medium entropy alloy processed by direct energy deposition10.1016/j.msea.2021.142110 ↗
18. Gradient cell-structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
19. Heavily twinned CoCrNi medium-entropy alloy with superior strength and crack resistance10.1016/j.msea.2020.139591 ↗
20. Shear response of ∑3{112} twin boundaries in face-centered-cubic metals
21. Stacking defects in the 9R phase at an incoherent twin boundary in copper10.1016/S1359-6454(98)00164-5 ↗
22. Twin boundary-assisted precipitation of sigma phase in a high-entropy alloy10.1016/j.matlet.2021.130198 ↗
23. Interfacial nanophases stabilize nanotwins in high-entropy alloys10.1016/j.actamat.2019.12.010 ↗
24. Recent progress in the CoCrNi alloy system10.1016/j.mtla.2022.101476 ↗
25. Wang · Appl. Phys. Lett. · 2009 · 95
26. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
27. Deformation-induced concurrent formation of 9R phase and twins in a nanograined aluminum alloy10.1016/j.actamat.2022.118540 ↗
28. High-strength nanotwinned Al alloys with 9R phase
29. The role of 9R structures on deformation-induced martensitic phase transformations in dual-phase high-entropy alloys10.1016/j.msea.2022.143705 ↗
30. Twin boundary-assisted precipitation of sigma phase in a high-entropy alloy10.1016/j.matlet.2021.130198 ↗
31. Phase stability and kinetics of sigma-phase precipitation in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2018.09.040 ↗
32. Strengthening and strain hardening mechanisms in precipitation-hardened CrCoNi medium entropy alloys10.1016/j.jallcom.2021.162962 ↗
33. Tracer diffusion in the σ phase of the CoCrFeMnNi system10.1016/j.actamat.2020.116498 ↗
34. Effect of hot isostatic pressing of laser powder bed fused Inconel 625 with purposely induced defects on the residual porosity and fatigue crack propagation behavior
35. Dislocations interacting with a pore in with a pore in an elastically anisotropic single crystal nickel-base superalloy during hot isostatic pressing10.1016/j.commatsci.2021.111118 ↗
36. Pore annihilation in a single-crystal nickel-base superalloy during hot isostatic pressing: experiment and modelling10.1016/j.msea.2013.08.034 ↗
37. Hot deformation and dynamic recrystallization behavior of CoCrNi and (CoCrNi) 94Ti3Al3 medium entropy alloys10.3390/met10101341 ↗
38. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
39. Dynamic observation of the FCC to 9R shear transformation in a copper Σ=3 incoherent twin boundary10.1016/1359-6462(96)00220-5 ↗
40. Heterophase interface-mediated formation of nanotwins and 9R phase in aluminum: underlying mechanisms and strengthening effect10.1016/j.actamat.2019.05.053 ↗
41. Creep of single crystals of nickel-based superalloys at ultra-high homologous temperature10.1007/s11661-018-4729-6 ↗
42. Epishin · 2018
43. Nanovoid cavitation by dislocation emission in aluminum10.1103/PhysRevLett.93.165503 ↗
44. The role of free surfaces on the formation of prismatic dislocation loops10.1016/j.scriptamat.2015.03.009 ↗
45. Atomistic insights into dislocation based mechanisms of void growth and coalescence10.1016/j.jmps.2011.05.008 ↗
46. Atomistic insights into dislocationbased mechanisms of void growth and coalescence10.1016/j.scriptamat.2020.07.027 ↗
47. Dislocation plasticity reigns in a traditional twinning-induced plasticity steel by in situ observation, Mater10.1016/j.mtnano.2018.11.004 ↗
48. Image force on a lattice dislocation due to a grain boundary in anisotropic f.c.c. materials10.1080/01418619408242225 ↗
49. Advancing strength and counteracting embrittlement by displacive transformation in heterogeneous high-entropy alloys containing sigma phase10.1016/j.actamat.2023.118717 ↗
50. Special’ boundaries and grain boundary plane engineering10.1016/j.scriptamat.2005.11.050 ↗
51. Structure and motion of junctions between coherent and incoherent twin boundaries in copper10.1016/j.actamat.2009.06.009 ↗
52. The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys10.1016/j.scriptamat.2016.11.014 ↗
53. Effect of stacking fault energy on the split length of 9R phase in coarse-grained Cu-Al alloys10.1016/j.matchar.2018.05.021 ↗
54. The bimodal nanocoherent precipitates leads to superior strength- ductility synergy in a novel CoCrNi-based medium entropy alloy10.1016/j.jallcom.2022.164809 ↗
55. High temperature strengthening via nanoscale precipitation in wrought CoCrNi-based medium-entropy alloys10.1016/j.msea.2020.140213 ↗
56. Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins structure prepared by cryo-rolling10.1016/j.intermet.2022.107638 ↗