Mechanical and electrochemical properties of porous NiTi intermetallics synthesized via rapid thermal explosion
Source abstract
Abstract
In this paper, porous NiTi intermetallic was synthesized via a modified thermal explosion (TE) method, utilizing Ni (74 μm, 38 μm, 5 μm, 100–200 nm) and Al element powders as raw material. The exothermic behavior and phase transition of porous NiTi intermetallic compounds were studied. The results showed that with the refinement of Ni particle size, the heat release decreased, and the Ti-74 μm sample was the product of two eutectic reactions. Their mechanical properties were verified by the Vickers hardness tester and universal testing machine, and the corrosion behavior of porous NiTi intermetallic compounds in phosphate-buffered saline (PBS) solution was studied by electrochemical tests. Among them, Ti-5 μm exhibits the most homogeneous microstructure and favorable mechanical properties, which has a porosity of 31.7 % and a compressive strength of 321.71 MPa. However, corrosion resistance is sacrificed due to the high open porosity. This study holds great promise for precise control microstructural characteristics and optimization of mechanical and electrochemical properties of porous NiTi intermetallics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Interfacial engineering of hierarchically porous NiTi/hydrogels nanocomposites with exceptional antibiofouling surfaces
2. Biocompatibility of nano porous TiO2 coating on NiTi alloy prepared via dealloying method
3. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
4. Compression and superelasticity behaviors of NiTi porous structures with tiny strut fabricated by selective laser melting10.1016/j.jallcom.2020.157674 ↗
5. Pore characteristics of porous NiTi alloy fabricated by combustion synthesis10.1016/S0925-8388(01)01382-2 ↗
6. Mour · 2010 · vol. 3 · 2947
7. Analytical relationships for prediction of the mechanical properties of additively manufactured porous biomaterials10.1002/jbm.a.35855 ↗
8. Electrochemical corrosion behavior and mechanical response of selective laser melted porous metallic biomaterials10.1007/s40195-023-01537-4 ↗
9. Innovative high-pressure fabrication processes for porous biomaterials—a review10.3390/bioengineering8110170 ↗
10. Fabrication of porous NiTi biomedical alloy by SHS method10.1007/s10856-019-6296-9 ↗
11. Combustion synthesis porous nitinol for biomedical applications10.1155/2019/4307461 ↗
12. Preparation and characterization of porous NiTi alloys synthesized by microwave sintering using Mg space holder10.1016/S1003-6326(21)65511-5 ↗
13. Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis10.1016/j.msea.2003.08.118 ↗
14. Effect of synthesis mode and Ni particle size on microstructural aspects and hardness properties of combustion-synthesized NiTi10.1007/s12540-019-00497-8 ↗
15. Fabrication of nickel-titanium-iron shape memory alloys by powder metallurgy route and analyses of their physical and mechanical behavior
16. Microstructural and mechanical investigation of NiTi intermetallics produced by hot deformation technique10.1007/s13369-017-2567-2 ↗
17. Effect of grain size on the microstructure and mechanical anisotropy of stress-induced martensitic NiTi alloys10.1016/j.msea.2022.143497 ↗
18. Research and development in NiTi shape memory alloys fabricated by selective laser melting
19. Cavitation erosion and corrosion behavior of NiTi cladding with Cu and Nb interlayers10.1007/s11665-020-04901-y ↗
20. Nanoindentation of pseudoelastic NiTi containing Ni4Ti3 precipitates10.3139/146.110792 ↗
21. Investigation of the influence of Ni powder size on microstructural evolution and the thermal explosion combustion synthesis of NiTi10.1016/j.intermet.2009.03.018 ↗
22. Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis
23. Kirkendall pore evolution during interdiffusion and homogenization of titanium-coated nickel microwires10.1016/j.intermet.2021.107199 ↗
24. Porous NiTi alloys produced by press-and-sinter from Ni/Ti and Ni/TiH2 mixtures10.1016/j.msea.2013.05.082 ↗
25. Characteristic variation of pulsed-anodized NiTi surface by the adjustment of voltage-unapplied state10.1002/sia.7133 ↗
26. Reaction mechanism and oxidation resistance at 700–900 °C of high porosity NiAl intermetallic10.1016/j.corsci.2021.109731 ↗
27. High temperature anti-oxidation and filtration behavior of micro/nano-scale porous CoAl intermetallic synthesized via rapid thermal explosion10.1016/j.corsci.2023.111216 ↗
28. 3D microstructure and anti-oxidation behavior of porous CoAl intermetallic fabricated by rapid thermal explosion10.1016/j.corsci.2022.110715 ↗
29. Combustion synthesis of advanced materials: Part I. Reaction parameters10.1016/0079-6425(94)00011-5 ↗
30. Effect of the heating rate on the thermal explosion behavior and oxidation resistance of 3D-structure porous NiAl intermetallic10.1016/j.matchar.2022.112062 ↗
31. Oxidation resistance at 900 °C of porous Ni-Al-Cr intermetallics synthesized via rapid thermal explosion reaction10.1016/j.jallcom.2022.164374 ↗
32. Plasticity of porous NiTi alloys obtained by self-propagating high-temperature synthesis in closed and open gas flow reactors10.1080/10426914.2023.2165665 ↗
33. Corrosion behavior of NiTi alloy in fetal bovine serum10.1016/j.electacta.2010.04.061 ↗