Experimental Verification of Real-Time Flow-Rate Estimations in a Tilting-Ladle-Type Automatic Pouring Machine
Source abstract
Abstract
This paper discusses a real-time flow-rate estimation method for a tilting-ladle-type automatic pouring machine used in the casting industry. In most pouring machines, molten metal is poured into a mold by tilting the ladle. Precise pouring is required to improve productivity and ensure a safe pouring process. To achieve precise pouring, it is important to control the flow rate of the liquid outflow from the ladle. However, due to the high temperature of molten metal, directly measuring the flow rate to devise flow-rate feedback control is difficult. To solve this problem, specific flow-rate estimation methods have been developed. In the previous study by present authors, a simplified flow-rate estimation method was proposed, in which Kalman filters were decentralized to motor systems and the pouring process for implementing into the industrial controller of an automatic pouring machine used a complicatedly shaped ladle. The effectiveness of this flow rate estimation was verified in the experiment with the ideal condition. In the present study, the appropriateness of the real-time flow-rate estimation by decentralization of Kalman filters is verified by comparing it with two other types of existing real-time flow-rate estimations, i.e., time derivatives of the weight of the outflow liquid measured by the load cell and the liquid volume in the ladle measured by a visible camera. We especially confirmed the estimation errors of the candidate real-time flow-rate estimations in the experiments with the uncertainty of the model parameters. These flow-rate estimation methods were applied to a laboratory-type automatic pouring machine to verify their performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Control Systems Optimization · Advanced Control Systems Design · Advanced Manufacturing and Logistics Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Course of Mechanical Engineering, Integrated Graduate School of Medicine, Engineering and Agricultural Sciences, University of Yamanashi, Takeda 4-3-11, Kofu 400-8511, Japan
Faculty of Engineering, Graduate Faculty of Interdisciplinary Research, University of Yamanashi, Takeda 4-3-11, Kofu 400-8511, Japan
Funding
Japan Society for the Promotion of Science
References (41)
Show source-provided references
1. Automatic pouring and metal distribution system
2. Recent automatic pouring and transfer systems in foundries
3. Pouring systems for ferrous applications
4. Semi automatic pouring system
5. Research on kinematics and pouring law of a mobile heavy load pouring robot
6. Automatic pouring equipment for casting-Mel pore system
7. Automation of the casting process using a model-based NC architecture10.1016/j.ifacol.2015.10.102 ↗
8. Yajima, T., and Noda, Y. (2018, January 23–27). Teaching-and-playback approach based on pouring flow rate in tilting-ladle-type pouring machine. Proceedings of the 73rd World Foundry Congress, Cracow, Poland.
9. Voss, T. (2018, January 23–27). Optimization and control of modern ladle pouring process. Proceedings of the 73rd World Foundry Congress, Cracow, Poland.
10. Supervisory control of automatic pouring machine10.1016/j.conengprac.2009.11.001 ↗
11. Iwamoto, K., Tokunaga, H., and Okane, T. (2014, January 7–8). Training support for pouring task in casting process using stereoscopic video see-through display. Proceedings of the 2014 1st International Conference on Information Technology, Computer and Electrical Engineering, Semarang, Indonesia.10.1109/ICITACEE.2014.7065729 ↗
12. Terashima, K., Yano, K., Sugimoto, Y., and Watanabe, M. (2001, January 4–6). Position control of ladle tip and sloshing suppression during tilting motion in automatic pouring machine. Proceedings of the IFAC Symposium on Automation in Mining, Mineral and Metal Processing, Tokyo, Japan.10.1016/S1474-6670(17)33211-1 ↗
13. Analysis and control of pouring ladle with weir for sloshing an volume-moving vibration in pouring cut-off process
14. Sloshing control in tilting phases of the pouring process
15. On the Modelling and controller design for the outpouring phase of the pouring process
16. Moriello, L., Biagiotti, L., Melchiorri, C., and Paoli, A. (June, January 29). Control of liquid handling robotic systems: A feed-forward approach to suppress sloshing. Proceedings of the 2017 IEEE International Conference on Robotics and Automation, Singapore.10.1109/ICRA.2017.7989493 ↗
17. Manipulating liquids with robots: A sloshing-free solution10.1016/j.conengprac.2018.06.018 ↗
18. Fukushima, R., Noda, Y., and Terashima, K. (2009, January 1–3). Falling position and anti-sloshing control of liquid using automatic pouring robot. Proceedings of the International PhD Foundry Conference, Brno, Czech Republic.
19. Liang, H., Li, S., Ma, X., Hendrich, N., Gerkmann, T., and Zhang, J. (2019, January 3–8). Making sense of audio vibration for liquid height estimation in robotic pouring. Proceedings of the 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems, Macau, China.10.1109/IROS40897.2019.8968303 ↗
20. Rozo, L., Jimenez, P., and Torras, C. (2013, January 3–5). Force-based robot learning of pouring skills using parametric hidden Markov models. Proceedings of the 9th International Workshop on Robot Motion and Control, Kuskin, Poland.10.1109/RoMoCo.2013.6614613 ↗
21. Kuriyama, Y., Yano, K., and Nishido, S. (2012). Optimization of pouring velocity for aluminium gravity casting. Fluid Dynamics, Computational Modeling and Applications, IntechOpen.10.5772/27629 ↗
22. Modeling and feedforward flow rate control of automatic pouring system with real ladle10.20965/jrm.2007.p0205 ↗
23. Noda, Y., Fukushima, R., and Terashima, K. (2010, January 2–4). Monitoring and control system to falling position of outflow liquid in automatic pouring robot. Proceedings of the IFAC 13th Symposium on Automation in Mining, Mineral and Metal Processing, Cape Town, South Africa.10.3182/20100802-3-ZA-2014.00003 ↗
24. Outflow liquid falling position control considering lower pouring mouth position with collision avoidance for tilting-type automatic pouring machine10.2320/matertrans.F-M2016842 ↗
25. Optimization of ladle position to minimize spilled liquid from pouring basin in automatic pouring machine
26. Sueki, Y., and Noda, Y. (2017, January 3–7). Optimal positioning of ladle in automatic pouring machine in consideration of pouring liquid accurately into sprue. Proceedings of the IEEE International Conference on Advanced Intelligent Mechatronics, Munich, ND, USA.10.1109/AIM.2017.8014132 ↗
27. Noda, Y., and Terashima, K. (2008, January 20–22). State estimation of automatic pouring system with load cell in casting process. Proceedings of the SICE Annual Conference 2008, Tokyo, Japan.10.1109/SICE.2008.4654907 ↗
28. Noda, Y., and Terashima, K. (2009, January 18–21). Estimation of flow rate in automatic pouring system with real ladle used in industry. Proceedings of the ICROS-SICE International Conference 2009, Fukuoka, Japan.
29. Noda, Y., Birkhold, M., Terashima, K., Sawodny, O., and Verl, A. (2011, January 13–18). Flow rate estimation using unscented Kalman filter in automatic pouring machine. Proceedings of the SICE Annual Conference 2011, Tokyo, Japan.
30. Noda, Y., Zeitz, M., Sawodny, O., and Terashima, K. (2011, January 28–30). Flow rate control based on differential flatness in automatic pouring robot. Proceedings of the 2011 IEEE International Conference on Control Applications, Denver, CO, USA.10.1109/CCA.2011.6044508 ↗
31. Noda, Y., and Terashima, K. (2012, January 20–23). Simplified flow rate estimation by decentralization of Kalman filters in automatic pouring robot. Proceedings of the SICE Annual Conference 2012, Akita, Japan.
32. Noda, Y., and Sueki, Y. (2019). Implementation and experimental verification of flow rate control based on differential flatness in a tilting-ladle-type automatic pouring machine. Appl. Sci., 9.10.3390/app9101978 ↗
33. Development of automatic pouring equipment
34. Yamaguchi, A., and Atkeson, C. (2016, January 15–17). Stereo vision of liquid and particle flow for robot pouring. Proceedings of the 2016 IEEE-RAS 16th International Conference on Humanoid Robots, Cancun, Mexico.10.1109/HUMANOIDS.2016.7803419 ↗
35. Schenck, C., and Fox, D. (July, January 29). Visual closed-loop control for pouring liquids. Proceedings of the 2017 IEEE International Conference on Robotics and Automation, Singapore.10.1109/ICRA.2017.7989307 ↗
36. Accurate Pouring with an Autonomous robot using an RGB-D camera
37. Kennedy, M., Queen, K., Thakur, D., and Kumar, V. (2017, January 24–28). Precise dispensing of liquids using visual feedback. Proceedings of the 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems, Vancouver, BC, Canada.10.1109/IROS.2017.8202301 ↗
38. Suzuki, M., Yang, Y., Noda, Y., and Terashima, K. (2008, January 21–24). Sequence control of automatic pouring system. Proceedings of the 10th Asian Foundry Congress, Aichi, Japan.
39. Kabasawa, N., and Noda, Y. (2021). Model-based flow rate control with online model parameters identification in automatic pouring machine. Robotics, 10.10.3390/robotics10010039 ↗
40. Simple Analytic Rules for Model Reduction and PID Controller Tuning10.1016/S0959-1524(02)00062-8 ↗
41. Huba, M., and Vrancic, D. (2021). Extending the Model-Based Controller Design to Higher-Order Plant Models and Measurement Noise. Symmetry, 13.10.3390/sym13050798 ↗