Innovative Cementitious Composites Produced with Corn Straw Fiber: Effect of the Alkaline Treatments
Source abstract
Abstract
Recently, numerous studies have been carried out with natural fibers in cementitious composites, due to the viability of using this type of fiber as a substitute for synthetic fibers. In this field of study, the present research aims to evaluate the feasibility of using corn straw fiber for the production of innovative cementitious composites. Mortars with a composition of 1:1:6:1.55 (cement/lime/sand/water) containing 0, 2.5 and 5% corn straw fiber were produced. The corn straw fibers were treated with three different alkaline products: sodium hydroxide (NaOH), potassium hydroxide (KOH) and calcium hydroxide (Ca(OH)2). The compositions were evaluated by means of compressive strength, water absorption, density and porosity and consistency tests. Characterization tests were also carried out on the natural fibers subjected to the different treatments, where it was observed that chemical characterization revealed an increase in crystalline cellulose from 59.03% to 63.50% (NaOH), 62.41% (KOH) and 60.40% (Ca(OH)2), which enhances fiber strength. In the mortars, it was observed that the water absorption results were reduced when the alkaline treatments were used, reducing from 15.95% (composition without fibers) to 6.34% and 6.61% in the compositions with 2.5% and 5.0% of fibers treated with KOH, for example. The effects were also positive in the compositions with fibers treated in NaOH, where the water absorption values were 7.59% and 7.88% for the compositions containing 2.5% and 5.0% of treated fiber, respectively. Alkaline treatments also promote an increase in compressive strength when comparing the results of mortars with natural fibers and fibers treated with NaOH, for example. The result for mortars containing 5.0% untreated fibers was 0.22 MPa, while for the composition containing 5.0% fibers treated with NaOH, it was 3.79 MPa, an increase of more than 15x. This behavior is justified by the effect of the treatment, which, in addition to removing impurities from natural fibers, such as sugar, increases the crystalline cellulose content and the adhesion between fiber and matrix. Based on the results obtained, it is possible to conclude that (i) the treatment with NaOH increases the crystallinity and tensile strength of the fibers, promoting good properties for innovative cementitious composites; (ii) the treatment with KOH degrades the cellulose structure of the fiber, reducing the crystallinity and tensile strength; this promotes greater adhesion of the fiber to the matrix, reducing porosity and water absorption, but promotes a reduction in compressive strength when compared to composites with 2.5% natural fiber; and (iii) the treatment with Ca(OH)2 presents a reduction in water absorption and porosity, due to the impregnation of calcium in the fiber that improves the adhesion between fiber and matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Federal University of Viçosa (UFV), Campus Rio Paranaíba, Highway BR 230 Km 7, Rio Paranaíba 38810-000, Brazil
Civil Engineering Laboratory (LECIV), North Fluminense Estadual University (UENF), Av. Alberto Lamego 2000, Campos dos Goytacazes 28013-602, Brazil
References (53)
Show source-provided references
1. Simultaneous Enhancement of Ductility and Sustainability of High-Strength Strain-Hardening Cementitious Composites (SHCC) Using Recycled Fine Aggregates10.1016/j.jclepro.2024.143357 ↗
2. Synthesis of a Waterproof Geopolymer Adhesive Applied in DUV LEDs Packaging10.1016/j.ceramint.2023.08.142 ↗
3. Multimaterial 3D-Printing Barium Titanate/Carbonyl Iron Composites with Bilayer-Gradient Honeycomb Structure for Adjustable Broadband Microwave Absorption10.1016/j.ceramint.2021.12.190 ↗
4. Effects of Steel Fiber and Target Thickness on the Penetration Resistance of UHPC under High Velocity Small Projectile Impact Loading10.1016/j.cemconcomp.2023.105064 ↗
5. Bond Behavior between Steel Bar and Strain-Hardening Fiber-Reinforced Cementitious Composites under Fatigue Loading10.1016/j.engstruct.2024.118354 ↗
6. The Effect of Animal and Synthetic Fibers on the Physico-Mechanical Durability and Microstructure Properties of Natural Hydraulic Lime-Based Mortars10.1016/j.mtcomm.2023.106041 ↗
7. De Azevedo, A.R.G., Klyuev, S., Marvila, M.T., Vatin, N., Alfimova, N., de Lima, T.E.S., Fediuk, R., and Olisov, A. (2020). Investigation of the Potential Use of Curauá Fiber for Reinforcing Mortars. Fibers, 8.10.3390/fib8110069 ↗
8. Effect of Microcrystalline and Microfibrillated Cellulose on the Evolution of Hydration of Cement Pastes by Thermogravimetry10.1007/s10973-020-09572-4 ↗
9. Agro-Industrial Waste from Corn Straw Fiber: Perspectives of Application in Mortars for Coating and Laying Blocks Based on Ordinary Portland Cement and Hydrated Lime10.1016/j.conbuildmat.2022.129111 ↗
10. Investigation of Chemical, Thermal and Morphological Properties of Untreated and NaOH Treated Banana Fiber10.1016/j.matpr.2019.06.655 ↗
11. Motaleb, K.Z.M.A., Shariful Islam, M., and Hoque, M.B. (2018). Improvement of Physicomechanical Properties of Pineapple Leaf Fiber Reinforced Composite. Int. J. Biomater., 2018.10.1155/2018/7384360 ↗
12. Physico-Mechanical Properties of Chemically Treated Palm and Coir Fiber Reinforced Polypropylene Composites10.1016/j.biortech.2009.04.072 ↗
13. A Review on the Tensile Properties of Natural Fiber Reinforced Polymer Composites10.1016/j.compositesb.2011.01.010 ↗
14. The Durability of SHCC with Alkali Treated Curaua Fiber Exposed to Natural Weathering10.1016/j.cemconcomp.2018.09.002 ↗
15. Use of Natural Vegetable Fibers in Cementitious Composites: Concepts and Applications10.1007/s41062-021-00551-8 ↗
16. Influence of Different Methods of Treating Natural Açai Fibre for Mortar in Rural Construction
17. A Study on Flax Fiber-Reinforced Polyethylene Biocomposites10.13031/2013.27454 ↗
18. Fabrication of Long and Discontinuous Natural Fiber Reinforced Polypropylene Biocomposites and Their Mechanical Properties10.1007/s12221-009-0083-z ↗
19. Potentiality of Using Guarumã Natural Fiber (Ischinosiphon Koern) in Sustainable Coating Mortars10.1016/j.jmrt.2024.03.121 ↗
20. Effect of Alkali Treatment on Microstructure and Mechanical Properties of Coir Fibres, Coir Fibre Reinforced-Polymer Composites and Reinforced-Cementitious Composites10.1016/j.conbuildmat.2016.02.182 ↗
21. (2019). Cimento Portland—Determinação Da Resistência à Compressão de Corpos de Prova Cilíndricos (Standard No. NBR 7215). (In Portuguese).
22. Kaolinite Plastic Binder in Mortars: Rheological and Mechanical Properties10.1016/j.powtec.2024.120072 ↗
23. (2011). Concreto e Argamassa-Determinação Da Resistência à Tração Por Compressão Diametral de Corpos de Prova Cilíndricos (Standard No. NBR 7222).
24. (2005). Argamassa e Concreto Endurecidos–Determinação Da Absorção de Água, Índice de Vazios e Massa Específica (Standard No. NBR 9778).
25. Cellulose Polymorphy, Crystallite Size, and the Segal Crystallinity Index10.1007/s10570-012-9833-y ↗
26. Comparison and Assessment of Methods for Cellulose Crystallinity Determination10.1039/D2CS00569G ↗
27. Natural Fiber-Reinforced Mortars10.1016/j.jobe.2019.100786 ↗
28. The Role of Aggregates on the Structure and Properties of Lime Mortars10.1016/j.cemconcomp.2005.05.001 ↗
29. Evaluation of Mechanical Properties of Sugar Cane Bagasse Ash Concrete10.1016/j.conbuildmat.2018.05.037 ↗
30. Durability of Coating Mortars Containing Açaí Fibers
31. Bamboo and Wood Fibre Cement Composites for Sustainable Infrastructure Regeneration10.1007/s10853-006-0224-3 ↗
32. Degradation of Natural Fiber in Ternary Blended Cement Composites Containing Metakaolin and Montmorillonite10.1016/j.corsci.2016.12.004 ↗
33. Shear Strength and Microstructure Characteristics of Soil Reinforced with Lignocellulosic Fibers-Sustainable Materials for Construction10.1016/j.conbuildmat.2022.129246 ↗
34. A Censorious Review on the Role of Natural Lignocellulosic Fiber Waste as a Low-Cost Adsorbent for Removal of Diverse Textile Industrial Pollutants10.1016/j.envres.2022.114183 ↗
35. Sustainable High-Yield Lignocellulosic Fibers and Modification Technologies Educing Softness and Strength for Tissues and Hygiene Products for Global Health
36. Characterization of Novel Lignocellulosic Spinifex Littoreus Fibers and Their Composites10.1007/s42235-020-0032-5 ↗
37. Evaluation of the Use of Marble Waste in Hydrated Lime Cement Mortar Based10.1007/s10163-019-00878-6 ↗
38. A Review on Performance of Polyester Fibers in Alkaline and Cementitious Composites Environments10.1016/j.conbuildmat.2020.117998 ↗
39. Recent Developments in the Application of Oil Palm Fibers in Cement Composites10.1007/s11709-019-0576-9 ↗
40. Mining Waste and Coconut Fibers as an Eco-Friendly Reinforcement for the Production of Concrete Blocks10.1007/s11356-023-26493-5 ↗
41. Idealized Powder Diffraction Patterns for Cellulose Polymorphs10.1007/s10570-013-0030-4 ↗
42. Limestone Calcined Clay Cement (LC3) Coating Mortars as an Energy-Efficient Option for Construction10.1016/j.conbuildmat.2024.136954 ↗
43. Application of Bacterial Nanofibrillated Cellulose for Performance Improvement in Vermiculite Lightweight Mortar10.1016/j.conbuildmat.2024.138474 ↗
44. (2016). Argamassa Para Assentamento e Revestimento de Paredes e Tetos-Determinação Do Índice de Consistência (Standard No. NBR 13276).
45. A Review on Natural Fiber Reinforced Composites10.1016/j.matpr.2020.04.851 ↗
46. Comparative evaluation of road pavement structures using cement concrete
47. Effects of Mercerization in the Chemical and Morphological Properties of Amazon Piassava10.1590/0104-1428.01717 ↗
48. Influence of the NaOH-Treated Hemp Fibres on the Properties of Fly-Ash Based Alkali-Activated Mortars Prior and after Wet/Dry Cycles10.1016/j.conbuildmat.2021.125072 ↗
49. Da Silva, T.T., da Silveira, P.H.P.M., Figueiredo, A.B.-H.d.S., Monteiro, S.N., Ribeiro, M.P., Neuba, L.d.M., Simonassi, N.T., Filho, F.d.C.G., and Nascimento, L.F.C. (2022). Dynamic Mechanical Analysis and Ballistic Performance of Kenaf Fiber-Reinforced Epoxy Composites. Polymers, 14.10.3390/polym14173629 ↗
50. Marcuello, C., Chabbert, B., Berzin, F., Bercu, N.B., Molinari, M., and Aguié-Béghin, V. (2023). Influence of Surface Chemistry of Fiber and Lignocellulosic Materials on Adhesion Properties with Polybutylene Succinate at Nanoscale. Materials, 16.10.3390/ma16062440 ↗
51. Modification of Tukey’s Additivity Test10.1016/j.jspi.2012.07.002 ↗
52. Weavers’ Perception towards Sustainability of Sambalpuri Handloom: A Tukey’s HSD Test Analysis10.1016/j.matpr.2021.05.242 ↗
53. (2023). Argamassas Inorgânicas—Requisitos e Métodos de Ensaios Parte 2: Argamassas Para Assentamento e Argamassas Para Fixação de Alvenaria (Standard No. NBR 13281).