journal article·2024-11-23Open access

Analysis of Production Process Parameters Using Computer Simulation at the Planning Stage

Szymon Pawlak, Tomasz Małysa, Agnieszka Fornalczyk

Applied Sciences· Volume 14· Issue 23

Abstract

Computer simulation is one of the tools that is often used to support activities related to the management of the production process. Computer simulation allows for the analysis of the parameters of production or logistics processes, among others. The study presents a comparative analysis of analytical methods and computer simulation (FlexSim 22.2.1 software) in relation to the subject matter. The use of computer simulation allowed for the verification of the number of production resources, determined by analytical methods, and for the proposal of improvements that would allow for shortening the duration of the production process and reducing its costs. The proposed improvements at the stage of planning the production process in terms of the number of production resources used to implement the assumed production plan allowed for the reduction of the duration of the production process and its costs. Therefore, it is justified to use computer simulation in solving problems related to various aspects of the functioning of an enterprise.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Engineering Technology and Methodologies · Mechanical Systems and Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Production Engineering, Faculty of Material Engineering, Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland

References (35)

Show source-provided references
1. Barosz, P., Gołda, G., and Kampa, A. (2020). Efficiency Analysis of Manufacturing Line with Industrial Robots and Human Operators. Appl. Sci., 10.10.3390/app10082862 ↗
2. Burduk, A., Chlebus, E., Nowakowski, T., and Tubis, A. (2018). Computer simulation of the operation of a longwall complex using the “process flow” concept of FlexSim software. Intelligent Systems in Production Engineering and Maintenance, Springer. Advances in Intelligent Systems and Computing.
3. Sweetser, A. (1999, January 20–30). A Comparison of System Dynamics (SD) and Discrete Event Simulation (DES). Proceedings of the 17th International Conference of the System Dynamics Society and the 5th Australian & New Zealand Systems Conference, Wellington, New Zealand.
4. A toolkit of design for mixing discrete event simulation and system dynamics10.1016/j.ejor.2016.08.016 ↗
5. Discrete event simulation for performance modelling in health care: A review of the literature10.1057/jos.2009.25 ↗
6. Discrete event simulation and virtual reality use in industry: New opportunities and future Trends10.1109/THMS.2016.2596099 ↗
7. Production logistics simulation and optimization of industrial enterprise based on FlexSim10.2507/IJSIMM15(4)CO18 ↗
8. Productivity improvement in a windows manufacturing layout using FlexSim simulation software
9. Simulation and optimization of warehouse operation based on FlexSim
10. Application of FlexSim software for developing cyber learning factory for smart factory education and training10.1007/s11042-019-08156-1 ↗
11. Korbicz, J., and Kowal, M. (2014). A Simulation Model for Emergency Evacuation Time and Low-Cost Improvements of a Hospital Facility Using FlexSim Healthcare: A Case Study. Intelligent Systems in Technical and Medical Diagnostics, Springer. Advances in Intelligent Systems and Computing.10.1007/978-3-642-39881-0 ↗
12. Santos, M., Júnior, E.L.S.B., Palermo, G.S., Walker, R.A., and Reis, M.F. (2018, January 12–13). Application of FlexSim software in the analysis of waiting time in hospital units of Rio de Janeiro: An approach from the Discrete Events Simulation. Proceedings of the VII Congresso Lean Six-Sigma, Campinas, Brazil.
13. Patvivatsiri, L., Montes, E.J., and Xi, O. (2007, January 9–12). Modeling bioterrorism preparedness with simulation in rural healthcare system. Proceedings of the 2007 Winter Simulation Conference, Washington, DC, USA.10.1109/WSC.2007.4419716 ↗
14. Identification of production bottlenecks with the use of Plant Simulation Software
15. Pekarcikova, M., Trebuna, P., Kliment, M., and Dic, M. (2021). Solution of Bottlenecks in the Logistics Flow by Applying the Kanban Module in the Tecnomatix Plant Simulation Software. Sustainability, 13.10.3390/su13147989 ↗
16. Fedorko, G., Molnár, V., Strohmandl, J., Horváthová, P., Strnad, D., and Cech, V. (2022). Research on Using the Tecnomatix Plant Simulation for Simulation and Visualization of Traffic Processes at the Traffic Node. Appl. Sci., 12.10.3390/app122312131 ↗
17. Ferro, R., Cordeiro, G.A., Ordóñez, R.E.C., Beydoun, G., and Shukla, N. (2021). An Optimization Tool for Production Planning: A Case Study in a Textile Industry. Appl. Sci., 11.10.3390/app11188312 ↗
18. Simulation with Enterprise Dynamics software: Tutorial presentation
19. Modelling and simulation production flow in job-shop production system with Enterprise Dynamics software10.35784/acs-2017-32 ↗
20. Process modeling and scenario simulation in construction using enterprise dynamics simulation software
21. Takus, D.A., and Profozich, D.M. (1997, January 7–10). Arena software tutorial. Proceedings of the 29th Conference on Winter Simulation, Atlanta, GA, USA.10.1145/268437.268564 ↗
22. Traffic simulation of two adjacent unsignalized T-junctions during rush hours using Arena software10.1016/j.simpat.2014.09.006 ↗
23. Solving the job-shop scheduling problem by Arena simulation software
24. Niemann-Delius, C. (2015). Application of ARENA Simulation Software for Evaluation of Open Pit Mining Transportation Systems—A Case Study. Proceedings of the 12th International Symposium Continuous Surface Mining-Aachen 2014, Springer. Lecture Notes in Production Engineering.
25. Utilization of the Arena simulation software and Lean improvements in the management of metal surface treatment processes10.1016/j.procs.2022.08.017 ↗
26. Pegden, C.D. (2007, January 9–12). Simio: A new simulation system based on intelligent objects. Proceedings of the 2007 Winter Simulation Conference, Washington, DC, USA.10.1109/WSC.2007.4419867 ↗
27. Pegden, C.D. (2008, January 7–10). Introduction to Simio. Proceedings of the 2008 Winter Simulation Conference, Miami, FL, USA.10.1109/WSC.2008.4736072 ↗
28. Kwasiborska, A., Skorupski, J., and Yatskiv, I. (2021). Modeling of Ground Handling Processes in Simio Software. Advances in Air Traffic Engineering, Springer. Lecture Notes in Intelligent Transportation and Infrastructure.10.1007/978-3-030-70924-2_6 ↗
29. Breznik, M., Buchmeister, B., and Vujica Herzog, N. (2023). Assembly Line Optimization Using MTM Time Standard and Simulation Modeling—A Case Study. Appl. Sci., 13.10.3390/app13106265 ↗
30. Alojaiman, B. (2023). Technological Modernizations in the Industry 5.0 Era: A Descriptive Analysis and Future Research Directions. Processes, 11.10.3390/pr11051318 ↗
31. Lee, T.Y., Ahmad, F., and Sarijari, M.A. (2023). Current Status and Future Research Trends of Construction Labor Productivity Monitoring: A Bibliometric Review. Buildings, 13.10.3390/buildings13061479 ↗
32. How to conduct a bibliometric analysis: An overview and guidelines10.1016/j.jbusres.2021.04.070 ↗
33. What Is a Case Study and What Is It Good for?10.1017/S0003055404001182 ↗
34. Case Study as a Choice in Qualitative Methodology
35. Production line balancing with discrete event simulation: A case study