Impact of UV Light Exposure During Printing on Thermomechanical Properties of 3D-Printed Polyurethane-Based Orthodontic Aligners
Source abstract
Abstract
Aim: Polyurethane-based aligners, created through photoinitiated free-radical polymerization, have been the subject of numerous studies focusing solely on their mechanical properties. In contrast, we investigate their thermomechanical properties, which are crucial for their efficacy. This paper aims to investigate the effects of different UV light exposure durations on the complex modulus of elasticity, tan delta, glass transition temperature, and the degree of conversion (DC). Methods: Aligners were printed using Tera Harz TC-85 and NextDent Ortho Flex resin with specific exposure times (2, 2.4, 3, 4, and 4.5 s for Tera Harz; 5, 6, 7, and 8 s for NextDent) and processed per manufacturer guidelines. The degree of conversion was analyzed using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy, while Dynamic Mechanical Analysis (DMA) characterized the mechanical properties (complex modulus and tan delta) and the glass transition. Results: Tera Harz TC-85 showed a higher degree of conversion (90.29–94.54%), suggesting fewer residual monomers, which is potentially healthier for patients. However, its lower glass transition temperature (35.60–38.74 °C) might cause it to become rubbery in the mouth. NextDent Orto Flex, with a higher storage modulus (641.85–794.55 MPa) and Tg (49.36–50.98 °C), offers greater rigidity and stability at higher temperatures (greater than temperature in the oral cavity), ideal for orthodontic forces, though its lower degree of conversion raises health concerns. Conclusions: Tera Harz TC 85 generally achieves higher DC and more stable polymerization across different UV exposure times than NextDent Orto Flex. Optimal polymerization times significantly impact both the mechanical and thermal properties of these dental resins, with NextDent showing optimal properties at 7 s and Tera Harz benefiting from both very short and extended exposure times.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Orthodontics, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia
Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 10000 Zagreb, Croatia
Forensic Science Centre “Ivan Vučetić”, Ministry of the Interior, 10000 Zagreb, Croatia
Department of Materials, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 10000 Zagreb, Croatia
References (56)
Show source-provided references
1. Clear Aligner Therapy: Up to Date Review Article10.4103/jos.jos_30_23 ↗
2. Goracci, C., Juloski, J., D’Amico, C., Balestra, D., Volpe, A., Juloski, J., and Vichi, A. (2023). Clinically Relevant Properties of 3D Printable Materials for Intraoral Use in Orthodontics: A Critical Review of the Literature. Materials, 16.10.3390/ma16062166 ↗
3. Narongdej, P., Hassanpour, M., Alterman, N., Rawlins-Buchanan, F., and Barjasteh, E. (2024). Advancements in Clear Aligner Fabrication: A Comprehensive Review of Direct-3D Printing Technologies. Polymers, 16.10.3390/polym16030371 ↗
4. Clear Aligners, the Aesthetic Solution: A Review10.37983/IJDM.2021.3304 ↗
5. Staderini, E., Chiusolo, G., Guglielmi, F., Papi, M., Perini, G., Tepedino, M., and Gallenzi, P. (2024). Effects of Thermoforming on the Mechanical, Optical, Chemical, and Morphological Properties of PET-G: In Vitro Study. Polymers, 16.10.3390/polym16020203 ↗
6. Tartaglia, G., Mapelli, A., Maspero, C., Santaniello, T., Serafin, M., Farronato, M., and Caprioglio, A. (2021). Direct 3D Printing of Clear Orthodontic Aligners: Current State and Future Possibilities. Materials, 14.10.3390/ma14071799 ↗
7. Models of Multivinyl Free Radical Photopolymerization Kinetics10.1016/S1010-6030(03)00178-3 ↗
8. Advances in Orthodontic Clear Aligner Materials
9. Yu, X., Li, G., Zheng, Y., Gao, J., Fu, Y., Wang, Q., Huang, L., Pan, X., and Ding, J. (2022). ‘Invisible’ Orthodontics by Polymeric ‘Clear’ Aligners Molded on 3D-Printed Personalized Dental Models. Regen. Biomater., 9.10.1093/rb/rbac007 ↗
10. Mechanical and Geometric Properties of Thermoformed and 3D Printed Clear Dental Aligners10.1016/j.ajodo.2019.05.012 ↗
11. Šimunović, L., Jurela, A., Sudarević, K., Bačić, I., Haramina, T., and Meštrović, S. (2024). Influence of Post-Processing on the Degree of Conversion and Mechanical Properties of 3D-Printed Polyurethane Aligners. Polymers, 16.10.3390/polym16010017 ↗
12. Effect of Heat Treatment and Nitrogen Atmosphere during Post-Curing on Mechanical Properties of 3D-Printed Orthodontic Aligners10.1093/ejo/cjad074 ↗
13. Effect of Post-Curing Light Exposure Time on the Physico-Mechanical Properties and Cytotoxicity of 3D-Printed Denture Base Material10.1016/j.dental.2021.10.011 ↗
14. Lim, J.H., Lee, S.Y., Gu, H., Jin, G., and Kim, J.E. (2022). Evaluating Oxygen Shielding Effect Using Glycerin or Vacuum with Varying Temperature on 3D Printed Photopolymer in Post-Polymerization. J. Mech. Behav. Biomed. Mater., 130.10.1016/j.jmbbm.2022.105170 ↗
15. Šimunović, L., Čekalović Agović, S., Marić, A.J., Bačić, I., Klarić, E., Uribe, F., and Meštrović, S. (2024). Color and Chemical Stability of 3D-Printed and Thermoformed Polyurethane-Based Aligners. Polymers, 16.10.3390/polym16081067 ↗
16. Polyurethanes as a Potential Medical-Grade Filament for Use in Fused Deposition Modeling 3D Printers—A Brief Review10.5604/01.3001.0012.5168 ↗
17. Cintora-López, P., Arrieta-Blanco, P., Martin-Vacas, A., Paz-Cortés, M.M., Gil, J., and Aragoneses, J.M. (2023). In Vitro Analysis of the Influence of the Thermocycling and the Applied Force on Orthodontic Clear Aligners. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1321495 ↗
18. Differential Stability of One-layer and Three-layer Orthodontic Aligner Blends under Thermocycling: Implications for Clinical Durability10.15644/asc57/4/1 ↗
19. Micromechanical Behavior of Ultraviolet-Exposed Polyurea10.1016/j.mechmat.2019.103244 ↗
20. The Effect of Ultraviolet Radiation on Ultrasonic Properties of Polyurea10.1016/j.polymdegradstab.2015.11.009 ↗
21. Mechanical Characterization of 3D-Printed Polymers
22. Recent research progress in the synthesis, characterization and applications of hyper cross-linked polymer10.1007/s10965-023-03783-7 ↗
23. Ashfaq, A., Clochard, M.C., Coqueret, X., Dispenza, C., Driscoll, M.S., Ulański, P., and Al-Sheikhly, M. (2020). Polymerization Reactions and Modifications of Polymers by Ionizing Radiation. Polymers, 12.10.3390/polym12122877 ↗
24. Oliveira, M.S., da Luz, F.S., da Costa Garcia Filho, F., Pereira, A.C., de Oliveira Aguiar, V., Lopera, H.A.C., and Monteiro, S.N. (2021). Dynamic Mechanical Analysis of Thermally Aged Fique Fabric-Reinforced Epoxy Composites. Polymers, 13.10.3390/polym13224037 ↗
25. Dynamic Mechanical and Thermal Properties of Clear Aligners after Thermoforming and Aging10.1186/s40510-021-00362-8 ↗
26. Dynamic Properties of Ultraviolet-Exposed Polyurea10.1007/s11043-016-9333-9 ↗
27. Glass Transition Temperature from the Chemical Structure of Conjugated Polymers10.1038/s41467-020-14656-8 ↗
28. Mechanical Properties of 3D Printed Polylactic Acid Product for Various Infill Design Parameters: A Review10.1088/1742-6596/1569/4/042010 ↗
29. Influence of Curing Protocol on Selected Properties of Light-Curing Polymers: Degree of Conversion, Volume Contraction, Elastic Modulus, and Glass Transition Temperature10.1016/j.dental.2009.08.001 ↗
30. The effect of UV radiation ageing on the structure, mechanical and gas permeability performances of ethylene–propylene–diene rubber10.1007/s10965-021-02447-8 ↗
31. Thiessen, M., and Abetz, V. (2021). Influence of the Glass Transition Temperature and the Density of Crosslinking Groups on the Reversibility of Diels-Alder Polymer Networks. Polymers, 13.10.3390/polym13081189 ↗
32. Cristea, M., Ionita, D., and Iftime, M.M. (2020). Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?. Materials, 13.10.3390/ma13225302 ↗
33. Nowick, A.S., and Berry, B.S. (1972). Anelastic Relaxation in Crystalline Solids, Academic Press.
34. Mechanical Studies on the Electron Induced Degradation of Polymethyl Methacrylate and Kapton10.1039/c0cp01130d ↗
35. Wang, Z., Wu, J., Shi, X., Song, F., Gao, W., and Liu, S. (2020). Stereocomplexation of Poly(lactic acid) and Chemical Crosslinking of Ethylene Glycol Dimethacrylate (EGDMA) Double-Crosslinked Temperature/pH Dual Responsive Hydrogels. Polymers, 12.10.3390/polym12102204 ↗
36. Fouassier, J.P., and Lalevée, J. (2012). Photoinitiators for Polymer Synthesis: Scope, Reactivity, and Efficiency, Wiley-VCH Verlag GmbH & Co. KGaA.10.1002/9783527648245 ↗
37. Lang, M., Hirner, S., Wiesbrock, F., and Fuchs, P. (2022). A Review on Modeling Cure Kinetics and Mechanisms of Photopolymerization. Polymers, 14.10.3390/polym14102074 ↗
38. Toward an Enhanced Understanding and Implementation of Photopolymerization Reactions10.1002/aic.11678 ↗
39. Balcerak, A., Kabatc-Borcz, J., Czech, Z., and Bartkowiak, M. (2023). Latest Advances in Highly Efficient Dye-Based Photoinitiating Systems for Radical Polymerization. Polymers, 15.10.3390/polym15051148 ↗
40. Rapid, Continuous Additive Manufacturing by Volumetric Polymerization Inhibition Patterning10.1126/sciadv.aau8723 ↗
41. Volumetric Photopolymerization Confinement through Dual-Wavelength Photoinitiation and Photoinhibition10.1021/acsmacrolett.9b00412 ↗
42. Menard, K.P. (2008). Dynamic Mechanical Analysis: A Practical Introduction, CRC Press.10.1201/9781420053135 ↗
43. Zhang, L., Li, L., Chen, Y., Pi, J., Liu, R., and Zhu, Y. (2023). Recent Advances and Challenges in Long Wavelength Sensitive Cationic Photoinitiating Systems. Polymers, 15.10.3390/polym15112524 ↗
44. Dynamic Bonds Mediate π-π Interaction via Phase Locking Effect for Enhanced Heat Resistant Thermoplastic Polyurethane10.1007/s10118-020-2494-7 ↗
45. Ceylan, G., Emik, S., Yalcinyuva, T., Sunbuloğlu, E., Bozdag, E., and Unalan, F. (2023). The Effects of Cross-Linking Agents on the Mechanical Properties of Poly (Methyl Methacrylate) Resin. Polymers, 15.10.3390/polym15102387 ↗
46. Hardness, Flexural Strength, and Flexural Modulus Comparisons of Three Differently Cured Denture Base Systems10.1111/j.1532-849X.2008.00357.x ↗
47. Tang, Q., Jiang, J., Li, J., Zhao, L., and Xi, Z. (2024). Effects of Chemical Composition and Cross-Linking Degree on the Thermo-Mechanical Properties of Bio-Based Thermosetting Resins: A Molecular Dynamics Simulation Study. Polymers, 16.10.3390/polym16091229 ↗
48. Layer-by-Layer Printing of Photopolymers in 3D: How Weak is the Interface?10.1021/acsami.9b22272 ↗
49. Panyukov, S. (2020). Theory of Flexible Polymer Networks: Elasticity and Heterogeneities. Polymers, 12.10.3390/polym12040767 ↗
50. Tuning the Range of Polyacrylamide Gel Stiffness for Mechanobiology Applications10.1021/acsami.5b09344 ↗
51. Qu, T., Nan, G., Ouyang, Y., Bieketuerxun, B., Yan, X., Qi, Y., and Zhang, Y. (2023). Structure-Property Relationship, Glass Transition, and Crystallization Behaviors of Conjugated Polymers. Polymers, 15.10.3390/polym15214268 ↗
52. Chain Flexibility and Glass Transition Temperatures of Poly(n-alkyl (meth)acrylate)s: Implications of Tacticity and Chain Dynamics10.1016/j.polymer.2020.123207 ↗
53. Understanding the Role of Cross-Link Density in the Segmental Dynamics and Elastic Properties of Cross-Linked Thermosets10.1063/5.0099322 ↗
54. Green Synthesis and Properties of an Epoxy-Modified Oxidized Starch-Grafted Styrene-Acrylate Emulsion10.1016/j.eurpolymj.2019.109412 ↗
55. Diurnal Variation of Intraoral pH and Temperature10.1038/bdjopen.2017.15 ↗
56. Intra-Oral Temperatures during Function10.1111/j.1365-2842.2005.01509.x ↗