Serrated flow stress in the CoCrFeNi multi-principal element alloys with different grain sizes and added Re

Multi-principal element alloys have attracted extensive attention as a new alloy design concept. In particular, the CoCrFeNi alloys with low stacking fault energy have excellent tensile plasticity and fracture toughness at both low and room temperature, and good phase stability at high temperatures, considered a new type of structural material with great potential. Multi-principal element alloys exhibit plastic instability termed serrated flow, at certain strain rates and temperature ranges. The serrated flow stress is usually closely related to dynamic strain aging, which reflects dislocation and barrier processes and impacts the mechanical properties of alloys. In the present study, CoCrFeNi alloys were selected as the research object, and the impact of grain size and the addition of Re elements on the serrated flow stress behavior was investigated. The results showed that in the tensile tests at 600 °C, the serrated flow stress behavior occurred in the fine-grain specimen only at a lower strain rate. The tensile curves of the coarse-grain specimen at different strain rates all show serration. Overall, the serrated type changes with the decreasing grain size, the increasing strain rate, and the addition of Re element, all of which result in a decrease in the magnitude and number of serrations and a weakening of the serrated behavior.