Residual Stress Determination with the Hole-Drilling Method on FDM 3D-Printed Precurved Specimen through Digital Image Correlation
Source abstract
Abstract
The hole-drilling method (HDM) is a common technique used for the determination of residual stresses, especially for metal alloy components, though also for polymers. This technique is usually implemented with strain gages, though other methods for determining the fields of displacements are quite mature, such as the use of digital image correlation (DIC). In the present paper, this combined methodology is applied to a 3D-printed PLA precurved specimen that is flattened in order to impose a bending distribution which can be considered known with a reasonable accuracy. The back-calculated stress distribution is in agreement with the expected (imposed) bending stress, however, a converging iterative procedure for obtaining the solution is introduced and discussed in the paper.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Welding Techniques and Residual Stresses · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
DICI, Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 1, 56122 Pisa, Italy
DII, Department of Information Engineering, University of Pisa, Via Girolamo Caruso 16, 56122 Pisa, Italy
Funding
University of Pisa
References (48)
Show source-provided references
1. Measurement of residual-stress distribution by the incremental hole-drilling method10.1016/0378-3804(85)90023-3 ↗
2. Use of Inverse Solutions for Residual Stress Measurements10.1115/1.2204952 ↗
3. Hole-Drilling Residual Stress Measurements at 75: Origins, Advances, Opportunities10.1007/s11340-009-9285-y ↗
4. (2013). Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method (Standard No. ASTM E837-13a).
5. (2020). Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method (Standard No. ASTM E837-20).
6. A procedure for evaluating high residual stresses using the blind hole drilling method, including the effect of plasticity10.1243/03093247JSA579 ↗
7. Experimental Verification of the Hole Drilling Plasticity Effect Correction10.4028/www.scientific.net/MSF.681.151 ↗
8. Universal Procedure for Correction of Plasticity Effect in Hole-Drilling Uniform Residual Stress Measurement10.1007/s11340-022-00869-z ↗
9. Measuring residual stress in finite thickness plates using the hole-drilling method10.1177/0309324718821832 ↗
10. Calibration Coefficients Determination Through Fem Simulations for the Hole-Drilling Method Considering the Real Hole Geometry10.1007/s40799-016-0152-3 ↗
11. Determination of Residual Stresses in Cylindrical Components by the Hole-drilling Method10.1007/s11340-021-00765-y ↗
12. Experimental and Numerical Strategies to Consider Hole Eccentricity for Residual Stress Measurement with the Hole Drilling Method10.3139/120.110330 ↗
13. First-order correction to counter the effect of eccentricity on the hole-drilling integral method with strain-gage rosettes10.1177/0309324716649529 ↗
14. Measured strains correction for eccentric holes in the determination of non-uniform residual stresses by the hole drilling strain gauge method10.1016/j.matdes.2017.06.051 ↗
15. Hole Eccentricity Correction for Hole-Drilling Residual Stress Measurements10.1007/s11340-022-00881-3 ↗
16. Optimal calculation steps for the evaluation of residual stress by the incremental hole-drilling method10.1007/BF02331114 ↗
17. Error and Uncertainty Analysis of the Residual Stresses Computed by Using the Hole Drilling Method10.1111/j.1475-1305.2009.00688.x ↗
18. On the estimation of error in measuring the residual stress by strain gauge rosette10.1016/j.measurement.2014.12.047 ↗
19. Uncertainty analysis for non-uniform residual stresses determined by the hole drilling strain gauge method10.1016/j.measurement.2016.11.010 ↗
20. Ill-Posedness and the Bias-Variance Tradeoff in Residual Stress Measurement Inverse Solutions10.1007/s11340-022-00928-5 ↗
21. Tikhonov, A.N., Goncharsky, A.V., Stepanov, V.V., and Yagola, A.G. (1995). Numerical Methods for the Solution of Ill-Posed Problems, Springer.10.1007/978-94-015-8480-7 ↗
22. Tikhonov regularization with Incremental Hole-Drilling and the Integral Method in Cross-Ply Composite Laminates10.1007/s11340-020-00629-x ↗
23. A Method to Combine Residual Stress Measurements from XRD and IHD using Series Expansion10.1007/s11340-021-00719-4 ↗
24. Assessment and Validation of Incremental Hole-Drilling Calculation Methods for Residual Stress Determination in Fiber-Metal Laminates10.1007/s11340-022-00848-4 ↗
25. Implementation of Gaussian Process Regression to strain data in residual stress measurements by hole drilling10.1016/j.measurement.2023.112590 ↗
26. Procedure to Perform a Validated Incremental Hole Drilling Measurement: Application to Shot Peening Residual Stresses10.1111/j.1475-1305.2009.00664.x ↗
27. Bending Test Rig for Validating the Hole Drilling Method Residual Stress Measurement
28. Validation of a strain gauge rosette setup on a cantilever specimen: Application to a calibration bench for residual stresses10.1016/j.matpr.2023.05.505 ↗
29. Full-field calculation of hole drilling residual stresses from electronic speckle pattern interferometry data10.1007/BF02427906 ↗
30. Advances in Hole-Drilling Residual Stress Measurements10.1007/s11340-009-9228-7 ↗
31. Residual Stress Measurement Using Hole Drilling and Integrated Digital Image Correlation Techniques10.1007/s11340-013-9814-6 ↗
32. Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC10.1007/s11340-012-9626-0 ↗
33. Residual Stress Analysis of Orthotropic Materials Using Integrated Digital Image Correlation10.1007/s11340-014-9859-1 ↗
34. Measurement of Structural Stresses by Hole-Drilling and DIC10.1007/s11340-016-0247-x ↗
35. On the Implementation of the Integral Method for Residual Stress Measurement by Integrated Digital Image Correlation10.1007/s11340-019-00503-5 ↗
36. Residual stress measurement combining blind-hole drilling and digital image correlation approach10.1016/j.jcsr.2020.106346 ↗
37. Arabul, E., and Lunt, A.J.G. (2022). A Novel Low-Cost DIC-Based Residual Stress Measurement Device. Appl. Sci., 12.10.3390/app12147233 ↗
38. Pástor, M., Hagara, M., Virgala, I., Kal’avský, A., Sapietová, A., and Hagarová, L. (2021). Design of a Unique Device for Residual Stresses Quantification by the Drilling Method Combining the PhotoStress and Digital Image Correlation. Materials, 14.10.3390/ma14020314 ↗
39. Cunha, F.G., Santos, T.G., and Xavier, J. (2021). In Situ Monitoring of Additive Manufacturing Using Digital Image Correlation: A Review. Materials, 14.10.3390/ma14061511 ↗
40. Boruah, D., Dewagtere, N., Ahmad, B., Nunes, R., Tacq, J., Zhang, X., Guo, H., Verlinde, W., and De Waele, W. (2023). Digital Image Correlation for Measuring Full-Field Residual Stresses in Wire and Arc Additive Manufactured Components. Materials, 16.10.3390/ma16041702 ↗
41. Far-Field Boundary Conditions for Calculation of Hole-Drilling Residual Stress Calibration Coefficients10.1007/s11340-016-0235-1 ↗
42. Evaluating Non-Uniform Residual Stress by the Hole-Drilling Method with Concentric and Eccentric Holes. Part I. Definition and Validation of the Influence Functions10.1111/j.1475-1305.2009.00683.x ↗
43. Evaluating Non-Uniform Residual Stress by the Hole-Drilling Method With Concentric and Eccentric Holes. Part II: Application of the Influence Functions to the Inverse Problem10.1111/j.1475-1305.2009.00684.x ↗
44. (2022). Standard Test Methods for Tension Testing of Metallic Materials (Standard No. ASTM E8/E8M-22).
45. (2017). Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus (Standard No. ASTM E111-17).
46. Hole-Drilling Residual Stress Profiling With Automated Smoothing10.1115/1.2744416 ↗
47. Ncorr: Open-Source 2D Digital Image Correlation Matlab Software10.1007/s11340-015-0009-1 ↗
48. Augmented-Resolution Digital image correlation algorithm for vibration measurements10.1016/j.measurement.2024.114565 ↗