Prediction Parameters for Mining Subsidence Based on Interferometric Synthetic Aperture Radar and Unmanned Aerial Vehicle Collaborative Monitoring

Coal mining induces surface subsidence, making rapid and precise monitoring of this subsidence a key area of current research. To address the limitations of D-InSAR technology in capturing large-gradient deformations in the central subsidence basin and the challenges facing UAVs in accurately monitoring small deformations at the basin’s edge, we propose a method for inverting the expected parameters of surface subsidence by synergistically integrating InSAR and UAV monitoring. We determined the cumulative subsidence of monitoring points along the dip and strike observation line of the Banji 110,801 working face between 10 April 2021 and 28 June 2022, employing D-InSAR and UAV techniques. By leveraging the complementary strengths of both monitoring techniques, we fused the two types of monitoring data and verified the error of the fusion data to be within 10 cm through leveling data verification. Simulation experiments utilizing the probability integration method and the Broyden–Fletcher–Goldfarb–Shanno (BFGS) optimization algorithm confirmed that the 10 cm data source error remains within the required limits for probability integration parameter inversion. Finally, the BFGS algorithm was employed to invert the parameters of the probability integration method based on the fusion data results. Subsequently, these inversion parameters were used to predict the subsidence at the monitoring point and were compared with the level measured data. The results demonstrate that the use of collaborative InSAR and UAV monitoring technology for inverting the expected parameters of surface subsidence in the mining area yields superior results, aligning with the actual patterns of ground surface movement and deformation. This study addresses the global need for unmanned monitoring of mining-related subsidence. It employs InSAR and UAV technologies in a synergistic approach to monitor surface subsidence in mining regions. This approach harnesses the strengths of multiple data sources and presents a novel concept for the unmanned monitoring of surface subsidence in mining areas, contributing to environmental protection efforts.