journal article·2025-01-06Open access

Self-Compacting Concrete with Artificial Lightweight Aggregates from Sugarcane Ash and Calcined Scheelite Mining Waste

Jemima Tabita F. de Sousa, Marcos Alyssandro S. dos Anjos, José Anselmo da S. Neto, Evilane C. de Farias, Fernando G. Branco, Cinthia Maia Pederneiras

Applied Sciences· Volume 15· Issue 1

Abstract

Self-compacting concrete (SCC) is a relevant technology and an alternative to conventional concrete in complex structures due to its exceptional workability. The rheological parameters demonstrated by SCC provide high fluidity and cohesion, resulting in high mould-filling capability and segregation resistance, as well as optimising concreting processes and reducing costs. In view of this, self-compacting lightweight concrete (SCLC) has emerged as a possible alternative as it combines the benefits of SCC and lightweight aggregate concrete (LWAC). In the production of LWC, the most widely used lightweight aggregate in the world, and also in Brazil, is still expanded clay; however, Brazilian production is restricted to the southeast region. In this context, previous studies have verified the feasibility of producing lightweight aggregates from the sintering of industrial waste and regional raw materials (Rio Grande do Norte/Brazil), such as sugarcane bagasse ash (SBA), scheelite mining residue (SMR), and local clay. Therefore, this study evaluates the influence of three lightweight aggregates, analysing their performance in comparison with SCLC produced with commercial lightweight aggregate (expanded clay). The concretes studied were subjected to characterisation tests in a fresh state; fluidity, apparent viscosity, visual stability, and passing ability were assessed through slump flow tests, flow time (T500), visual stability index, and J-ring, respectively, as well as measurement of the fresh specific mass. In the hardened state, tests were carried out to determine the compressive strength at 7 and 28 days, the dry specific mass, the chloride ion diffusion coefficient, and the thermal conductivity. The new concretes had density values ranging from 1.94 to 2.03 g/cm3 and compressive strength values at 28 days between 26.11 and 36.72 MPa. The results obtained show that it is feasible to produce SCLC with unconventional lightweight aggregates based on sugarcane bagasse waste and scheelite mining waste.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Federal University of Rio Grande do Norte (UFRN), Natal 59078-970, Brazil

Department of Civil Engineering, Federal Institute of Education, Science and Technology of Paraíba (IFPB), João Pessoa 58015-435, Brazil

Department of Materials Engineering, Federal University of Paraíba (UFPB), João Pessoa 58051-900, Brazil

Department of Civil Engineering, Federal Institute of Education Science and Technology of Rio Grande do Norte (IFRN), Natal 59078-970, Brazil

ISISE ARISE Department of Civil Engineering, University of Coimbra, 3000-370 Coimbra, Portugal

c5Lab Sustainable Construction Materials Association, 2795-242 Amadora, Portugal

Funding

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior · Foundation for Science and Technology · Institute for Sustainability and Innovation in Structural Engineering (ISISE)

References (38)

Show source-provided references
1. Mixture design method of self-compacting lightweight aggregate concrete based on rheological property and strength of mortar10.1016/j.jobe.2021.102660 ↗
2. Self-compacting lightweight concrete produced with expanded clay aggregate10.1016/j.conbuildmat.2012.04.111 ↗
3. Development of sustainable self-compacting concrete: Replacement of sand with municipal solid waste incineration ash molten slag and recycled fine aggregate10.1016/j.conbuildmat.2024.138674 ↗
4. Effect of micro steel fibers volume fraction on behavior of high-strength self-compacting concrete10.1016/j.conbuildmat.2024.138709 ↗
5. Durability of high strength self-compacting concrete with fly ash, coal gangue powder, cement kiln dust, and recycled concrete powder10.1016/j.conbuildmat.2024.138345 ↗
6. Effect of GGBFS on the mechanical properties of metakaolin-based self-compacting geopolymer concrete10.1016/j.jobe.2024.110501 ↗
7. Self-compacting lightweight aggregate concrete and its properties: A review10.1016/j.conbuildmat.2023.130861 ↗
8. Flexural behavior of self compacting self curing concrete with lightweight aggregates10.1016/j.matpr.2020.11.019 ↗
9. Enhancement of low-cement self-compacting concrete with dolomite powder10.1016/j.conbuildmat.2017.11.148 ↗
10. Study of three distinct self-compacting concretes containing marble/granite powder and hooked-end steel fiber contents10.1177/0021998321999438 ↗
11. Influence of Incorporation and Dimension of Expanded Polystyrene on Lightweight Concrete
12. Performance of ternary blend SCC with ground granulated blast furnace slag and metakaolin10.1016/j.matpr.2021.06.422 ↗
13. Mix design of structural lightweight self-compacting concrete incorporating coarse lightweight expanded clay aggregates10.1016/j.conbuildmat.2018.01.161 ↗
14. Optimization of fresh and hardened properties of structural light weight self-compacting concrete mix design using response surface methodology10.1016/j.conbuildmat.2021.125928 ↗
15. Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates10.1016/j.compositesb.2013.04.070 ↗
16. Failure characteristics of self-compacting concretes made with recycled aggregates10.1016/j.conbuildmat.2015.08.036 ↗
17. X-ray computed tomography and fractal analysis for the evaluation of segregation resistance, strength response and accelerated corrosion behaviour of self-compacting lightweight concrete10.1016/j.conbuildmat.2014.02.070 ↗
18. Properties of self-compacting lightweight concrete containing recycled plastic particles10.1016/j.conbuildmat.2015.03.038 ↗
19. The Effect of Curing Conditions on Permeation of Self-Compacting Lightweight Concrete with Basaltic Pumice Aggregate10.1007/s13369-017-2990-4 ↗
20. Structural concrete using sintered flyash lightweight aggregate: A review10.1016/j.conbuildmat.2017.08.005 ↗
21. Barnat-Hunek, D., Góra, J., Andrzejuk, W., and Łagód, G. (2018). The Microstructure-Mechanical Properties of Hybrid Fibres-Reinforced Self-Compacting Lightweight Concrete with Perlite Aggregate. Materials, 11.10.3390/ma11071093 ↗
22. Comparative Study of Self-Compacting Concrete Containing Lightweight and Normal Aggregates10.2478/sjce-2019-0009 ↗
23. Influence of content and maximum size of light expanded clay aggregate on the fresh, strength, and durability properties of self-compacting lightweight concrete reinforced with micro steel fibers10.1016/j.conbuildmat.2019.117922 ↗
24. Influência dos agregados leves de argila calcinada nas propriedades mecânicas de concretos estruturais
25. Evaluation of sugarcane bagasse ash for lightweight aggregates production10.1016/j.conbuildmat.2020.121604 ↗
26. Using scheelite residue and rice husk ash to manufacture lightweight aggregates10.1016/j.conbuildmat.2020.121845 ↗
27. Effect of aggregate type on properties of hardened self-consolidating lightweight concrete (SCLC)10.1016/j.conbuildmat.2009.12.007 ↗
28. Recent development and perspective of lightweight aggregates based self-compacting concrete10.1016/j.conbuildmat.2018.12.128 ↗
29. Eco-Efficient Self-Compacting Concrete with Reduced Portland Cement Content and High Volume of Fly Ash and Metakaolin10.4028/www.scientific.net/KEM.634.172 ↗
30. Almawla, S.A., Mohammed, M.K., and Al-Hadithi, A.I. (2019, January 7–10). Fresh and Mechanical Properties of Self-Compacting Lightweight Concrete Containing Ponza Aggregates. In Proceeding of the 12th International Conference on Developments in eSystems Engineering (DeSE), Kazan, Russia.10.1109/DeSE.2019.00028 ↗
31. Evaluation of efficiency factor of a self-compacting lightweight concrete with rubber and expanded clay contents10.1016/j.conbuildmat.2020.119573 ↗
32. Mix design and properties of lightweight self-consolidating concretes developed with furnace slag, expanded clay and expanded shale aggregates
33. Lightweight self-compacting concrete with light expanded clay aggregate (LECA)10.1051/matecconf/201816202031 ↗
34. Self-compacting lightweight aggregate concrete: Design and experimental study10.1680/macr.2008.00024 ↗
35. Fresh and hardened-state properties of self-compacting lightweight concrete reinforced with steel fibers10.1016/j.conbuildmat.2015.12.060 ↗
36. An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene10.1016/j.conbuildmat.2011.04.018 ↗
37. Chloride migration in structural lightweight aggregate concrete produced with different binders10.1016/j.conbuildmat.2015.08.080 ↗
38. Assunção, J.W. (2016). Self-Compacting Lightweight Concretes: Evaluation of Influence Expanded Clay in Mix Design Process and Concrete Properties. [Doctoral Thesis, University of São Paulo].