Tribological Performance Study of Low-Friction PEEK Composites under Different Lubrication Conditions

This study introduces a low-friction composite based on PEEK to improve its friction and wear properties. The composite incorporates PTFE as a solid lubricant and utilizes PPTA as a reinforcing material within the PEEK matrix. These components were prepared utilizing a compression molding method, followed by a series of exploratory experiments to identify the optimal preparation conditions for PEEK. This research assesses how the PTFE/PPTA/PEEK composites perform in terms of friction and wear under dry and oil-lubricated conditions. By examining wear tracks using scanning electron microscopy and white light interference microscopy, this study aims to uncover the wear mechanisms of PEEK and its composites under different lubrication scenarios. Results show that the main wear mechanisms for the PTFE/PPTA/PEEK composites and bearing steel are ploughing and adhesive wear. The presence of PPTA helps reduce wear by leveraging its strong fibers and thermal stability, while the coefficient of friction decreases as PTFE creates a smooth, solid lubricating film on the surface. Notably, PEEK composites containing 25 wt% PTFE and 6 wt% PPTA demonstrate the lowest wear rates and reduced coefficient of friction in both dry and oil-lubricated conditions.