The Effects of the Variable-Pressure Rolling of a Wire Arc Additively Manufactured Inconel625-SS308L Bimetallic Structure
Source abstract
Abstract
The superior deposition rates of Wire Arc Additive Manufacturing (WAAM) allow for the production of a substantial number of parts while reducing the time and cost associated with machining, and have attracted significant attention. This study focused the microstructural and mechanical properties of a bimetallic thin-wall composed of SS308L and Inconel625, manufactured using variable-pressure rolling WAAM. A detailed analysis of the cross-sectional microstructure of the bi-metallic wall of non-pressure cases revealed a columnar solidification structure. In contrast, the pressured case was dominated by equiaxed structures. The microhardness tests conducted on the bimetallic interface revealed a hardness range of 139–188 HV within the SS308L region, and a 187–222 HV hardness spectrum within the Inconel625 region. The bimetallic interface displayed no unexpected hardness variations. Tensile tests carried out in the vertical direction across the bi-metallic interface resulted in a localized failure at the 308L region. The range of ultimate tensile strength was between 539 and 585 MPa, the yield strength varied from 344 to 377 MPa, and the elongation measurements were found to be within the range of 37 to 44%. All test specimens showed a consistent pattern of ductile rupture upon fractographic inspection, with fracture occurring in the SS308L region.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Smart Manufacturing Engineering, School of the Smart Manufacturing Engineering, Changwon National University, Changwon 51140, Republic of Korea
Mechatronics Research Center, Changwon National University, Changwon 51140, Republic of Korea
Funding
National Research Foundation of Korea (NRF)
References (23)
Show source-provided references
1. Repair of damaged parts using wire arc additive manufacturing in machine tools10.1016/j.jmrt.2021.11.156 ↗
2. Treutler, K., and Wesling, V. (2021). The current state of research of wire arc additive manufacturing (WAAM): A review. Appl. Sci., 11.10.3390/app11188619 ↗
3. Jin, B., Wang, Q., Zhao, L., Pan, A., Ding, X., Gao, W., Song, Y., and Zhang, X. (2023). A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys. Metals, 13.10.3390/met13081327 ↗
4. Stavropoulos, P., Papacharalampopoulos, A., and Sabatakakis, K. (2023). Robust and Secure Quality Monitoring for Welding through Platform-as-a-Service: A Resistance and Submerged Arc Welding Study. Machines, 11.10.3390/machines11020298 ↗
5. Additive manufacturing of Inconel 718–Ti6Al4V bimetallic structures
6. Mechanical properties and microstructural characteristics of wire arc additive manufactured 308 L stainless steel cylindrical components made by gas metal arc and cold metal transfer arc welding processes10.1016/j.jmatprotec.2022.117655 ↗
7. The influence of microstructural anisotropy on the hot deformation of wire arc additive manufactured (WAAM) Inconel 71810.1016/j.msea.2021.141733 ↗
8. Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 62510.1016/j.jmst.2020.10.001 ↗
9. Dissimilar metal deposition with a stainless steel and nickel-based alloy using wire and arc-based additive manufacturing10.1016/j.precisioneng.2016.03.016 ↗
10. Enhanced interface strength in steel-nickel bimetallic component fabricated using wire arc additive manufacturing with interweaving deposition strategy10.1016/j.jmst.2020.04.019 ↗
11. Grain refinement in an unalloyed tantalum structure by combining Wire + Arc additive manufacturing and vertical cold rolling
12. Modelling and optimising hybrid process of wire arc additive manufacturing and high-pressure rolling10.1016/j.matdes.2022.111121 ↗
13. Understanding and designing post-build rolling for mitigation of residual stress and distortion in wire arc additively manufactured components10.1016/j.matdes.2021.110335 ↗
14. Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling10.1016/j.jmatprotec.2013.04.012 ↗
15. Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling10.1108/RPJ-01-2012-0006 ↗
16. Control of residual stress and distortion in aluminium wire+ arc additive manufacture with rolling
17. Hot forging wire and arc additive manufacturing (HF-WAAM)
18. Development of Variable Rolling Pressure Device for Bead-Shape Accuracy and Mechanical Property Enhancement in WAAM
19. Heat-treatment effects on a bimetallic additively-manufactured structure (BAMS) of the low-carbon steel and austenitic-stainless steel
20. Hertzberg, R.W., Vinci, R.P., and Hertzberg, J.L. (2020). Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons.
21. Consumable selection for arc welding between Stainless Steel 410 and Inconel 71810.1016/j.jmatprotec.2017.02.013 ↗
22. Characterization of stainless steel parts by laser metal deposition shaping10.1016/j.matdes.2013.09.006 ↗
23. Lippold, J.C., Kiser, S.D., and DuPont, J.N. (2011). Welding Metallurgy and Weldability of Nickel-Base Alloys, John Wiley & Sons.