Comparison of Full-Field Crystal Plasticity Simulations to Synchrotron Experiments: Detailed Investigation of Mispredictions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Kocks UF (1970) The relation between polycrystal deformation and single-crystal deformation. Metall Mater Trans B 1(5):1121–1143. https://doi.org/10.1007/bf0290022410.1007/bf02900224 ↗
2. Roters F et al (2010) Overview of constitutive laws, kinematics, homogenization, and multiscale methods in crystal plasticity finite element modeling: theory, experiments, applications. Acta Mater 58:1152–1211. https://doi.org/10.1016/j.actamat.2009.10.05810.1016/j.actamat.2009.10.058 ↗
3. Schmid E, Boas W (1950) Plasticity of crystals with special reference to metals. F. A. Hughes & Co., London
4. Van Houtte P (1982) On the equivalence of the relaxed Taylor theory and the Bishop-Hill theory for partially constrained plastic deformation of crystals. Mater Sci Eng 55(1):69–77. https://doi.org/10.1016/0025-5416(82)90085-410.1016/0025-5416(82)90085-4 ↗
5. Van Houtte P et al (2005) Deformation texture prediction: from the Taylor model to the advanced Lamel model. Int J Plast 21(3):589–624. https://doi.org/10.1016/j.ijplas.2004.04.01110.1016/j.ijplas.2004.04.011 ↗
6. Lebensohn RA, Tomé CN (1993) A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys. Acta Metall Mater 41(9):2611–2624. https://doi.org/10.1016/0956-7151(93)90130-K10.1016/0956-7151(93)90130-K ↗
7. Tjahjanto DD, Eisenlohr P, Roters F (2009) Relaxed grain cluster (RGC) homogenization scheme. IntJ Mater Form 2(1):939–942. https://doi.org/10.1007/s12289-009-0619-110.1007/s12289-009-0619-1 ↗
8. Takajo S, Vogel SC, Tomé CN (2019) Viscoplastic self-consistent polycrystal modeling of texture evolution of ultra-low carbon steel during cold rolling. Modell Simul Mater Sci Eng 27(4):045003. https://doi.org/10.1088/1361-651x/ab0b9210.1088/1361-651x/ab0b92 ↗
9. Eyckens P et al (2011) Validation of the texture-based ALAMEL and VPSC models by measured anisotropy of plastic yielding. Mater Sci Forum 702–703:233–236. https://doi.org/10.4028/www.scientific.net/msf.702-703.23310.4028/www.scientific.net/msf.702-703.233 ↗
10. Ghorbanpour S et al (2017) A crystal plasticity model incorporating the effects of precipitates in superalloys: application to tensile, compressive, and cyclic deformation of Inconel 718. Int J Plast 99:162–185. https://doi.org/10.1016/j.ijplas.2017.09.00610.1016/j.ijplas.2017.09.006 ↗
11. Roters F et al (2010) Crystal plasticity finite element methods in materials science and engineering. Wiley-VCH, Weinheim. https://doi.org/10.1002/978352763148310.1002/9783527631483 ↗
12. Zeghadi A et al (2007) Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure - Part 1: anisotropic elastic behaviour. Phil Mag 87(8–9):1401–1424. https://doi.org/10.1080/1478643060100950910.1080/14786430601009509 ↗
13. Zeghadi A et al (2007) Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure - Part 2: crystal plasticity. Phil Mag 87(8–9):1425–1446. https://doi.org/10.1080/1478643060100951710.1080/14786430601009517 ↗
14. Diehl M et al (2016) Neighborhood influences on stress and strain partitioning in dual-phase microstructures. An investigation on synthetic polycrystals with a robust spectral-based numerical method. Meccanica 51(2):429–441. https://doi.org/10.1007/s11012-015-0281-210.1007/s11012-015-0281-2 ↗
15. Tasan CC, Hoefnagels JPM, Geers MGD (2010) Microstructural banding effects clarified through micrographic digital image correlation. Scripta Mater 62(11):835–838. https://doi.org/10.1016/j.scriptamat.2010.02.01410.1016/j.scriptamat.2010.02.014 ↗
16. Yan D, Tasan CC, Raabe D (2015) High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels. Acta Mater 96:399–409. https://doi.org/10.1016/j.actamat.2015.05.03810.1016/j.actamat.2015.05.038 ↗
17. Kammers AD, Daly S (2013) Digital image correlation under scanning electron microscopy: methodology and validation. Exp Mech 53(9):1743–1761. https://doi.org/10.1007/s11340-013-9782-x10.1007/s11340-013-9782-x ↗
18. Reuber C et al (2014) Dislocation density distribution around an indent in single-crystalline nickel: comparing nonlocal crystal plasticity finite element predictions with experiments. Acta Mater 71:333–348. https://doi.org/10.1016/j.actamat.2014.03.01210.1016/j.actamat.2014.03.012 ↗
19. Plancher E et al (2019) Validity of crystal plasticity models near grain boundaries: contribution of elastic strain measurements at micron scale. JOM 71(10):3543–3551. https://doi.org/10.1007/s11837-019-03711-510.1007/s11837-019-03711-5 ↗
20. Sachtleber M, Zhao Z, Raabe D (2002) Experimental investigation of plastic grain interaction. Mater Sci Eng, A 336(1–2):81–87. https://doi.org/10.1016/S0921-5093(01)01974-810.1016/S0921-5093(01)01974-8 ↗
21. Lim H et al (2014) Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals. Int J Plast 60:1–18. https://doi.org/10.1016/j.ijplas.2014.05.00410.1016/j.ijplas.2014.05.004 ↗
22. Poulsen H (2004) Three-Dimensional X-Ray Diffraction Microscopy. Springer, Berlin. https://doi.org/10.1007/b9788410.1007/b97884 ↗
23. Lienert U et al (2011) High-energy diffraction microscopy at the advanced photon source. JOM 63(7):70–77. https://doi.org/10.1007/s11837-011-0116-010.1007/s11837-011-0116-0 ↗
24. Pokharel R (2018) Overview of high-energy x-ray diffraction microscopy (HEDM) for mesoscale material characterization in three-dimensions. In: Materials discovery and design. Springer International Publishing, pp 167–201. https://doi.org/10.1007/978-3-319-99465-9_710.1007/978-3-319-99465-9_7 ↗
25. Abdolvand H et al (2015) Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part I - In-situ three-dimensional synchrotron X-ray diffraction measurement. Acta Mater 93:246–255. https://doi.org/10.1016/j.actamat.2015.04.02010.1016/j.actamat.2015.04.020 ↗
26. Turner TJ et al (2016) Combined near- and far-field high-energy diffraction microscopy dataset for Ti-7Al tensile specimen elastically loaded in situ. Integr Mater Manuf Innov 5(1):94–102. https://doi.org/10.1186/s40192-016-0048-110.1186/s40192-016-0048-1 ↗
27. Pokharel R et al (2014) Polycrystal plasticity: comparison between grain-scale observations of deformation and simulations. Annu Rev Condens Matter Phys 5(1):317–346. https://doi.org/10.1146/annurev-conmatphys-031113-13384610.1146/annurev-conmatphys-031113-133846 ↗
28. Zaefferer S, Wright SI, Raabe D (2008) Three-dimensional orientation microscopy in a focused ion beam-scanning electron microscope: a new dimension of microstructure characterization. Metall Mater Trans A 39(2):374–389. https://doi.org/10.1007/s11661-007-9418-910.1007/s11661-007-9418-9 ↗
29. Diehl M et al (2017) Crystal plasticity study on stress and strain partitioning in a measured 3D dual phase steel microstructure. Phys Mesomech 20(3):311–323. https://doi.org/10.1134/S102995991703007910.1134/S1029959917030079 ↗
30. Groeber M et al (2018) A preview of the U.S. air force research laboratory additive manufacturing modeling challenge series. JOM 70(4):441–444. https://doi.org/10.1007/s11837-018-2806-310.1007/s11837-018-2806-3 ↗
31. Cox ME et al (2021) AFRL additive manufacturing modeling challenge series: overview. Integr Mater Manuf Innov 10(2):125–128. https://doi.org/10.1007/s40192-021-00215-610.1007/s40192-021-00215-6 ↗
32. Shade PA et al (2019) AFRL AM Modeling Challenge Series: Challenge 4 Data Packag. https://doi.org/10.18126/K5R2-32IU10.18126/K5R2-32IU ↗
33. Menasche DB et al (2021) AFRL additive manufacturing modeling series: challenge 4, in situ mechanical test of an IN625 sample with concurrent high-energy diffraction microscopy characterization. Integr Mater Manuf Innov 10(3):338–347. https://doi.org/10.1007/s40192-021-00218-310.1007/s40192-021-00218-3 ↗
34. Chapman MG et al (2021) AFRL additive manufacturing modeling series: challenge 4, 3D reconstruction of an IN625 high-energy diffraction microscopy sample using multi-modal serial sectioning. Integr Mater Manuf Innov 10(2):129–141. https://doi.org/10.1007/s40192-021-00212-910.1007/s40192-021-00212-9 ↗
35. Cocke CK et al (2021) The AFRL Additive manufacturing modeling challenge: predicting micromechanical fields in AM IN625 using an FFT-based method with direct input from a 3D microstructural image. Integr Mater Manuf Innov 10(2):157–176. https://doi.org/10.1007/s40192-021-00211-w10.1007/s40192-021-00211-w ↗
36. Yeratapally SR, Cerrone AR, Glaessgen EH (2021) Discrepancy between crystal plasticity simulations and far-field high-energy X-ray diffraction microscopy measurements. Integr Mater Manuf Innov 10(2):196–217. https://doi.org/10.1007/s40192-021-00216-510.1007/s40192-021-00216-5 ↗
37. Saha S et al (2021) Microscale structure to property prediction for additively manufactured IN625 through advanced material model parameter identification. Integr Mater Manuf Innov 10(2):142–156. https://doi.org/10.1007/s40192-021-00208-510.1007/s40192-021-00208-5 ↗
38. Roters F et al (2019) DAMASK - The Düsseldorf advanced material simulation kit for modelling multi-physics crystal plasticity, damage, and thermal phenomena from the single crystal up to the component scale. Comput Mater Sci 158:420–478. https://doi.org/10.1016/j.commatsci.2018.04.03010.1016/j.commatsci.2018.04.030 ↗
39. Shanthraj P et al (2015) Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials. Int J Plast 66:31–45. https://doi.org/10.1016/j.ijplas.2014.02.00610.1016/j.ijplas.2014.02.006 ↗
40. Hutchinson JW (1970) Elastic-plastic behaviour of polycrystalline metals and composites. Proc Roy Soci London A 319(1537):247–272. https://doi.org/10.1098/rspa.1970.017710.1098/rspa.1970.0177 ↗
41. Wong SL et al (2016) A crystal plasticity model for twinning- and transformation-induced plasticity. Acta Mater 118:140–151. https://doi.org/10.1016/j.actamat.2016.07.03210.1016/j.actamat.2016.07.032 ↗
42. Sedighiani K et al (2022) Determination and analysis of the constitutive parameters of temperature-dependent dislocation-density-based crystal plasticity models. Mech Mater 164:104117. https://doi.org/10.1016/j.mechmat.2021.10411710.1016/j.mechmat.2021.104117 ↗
43. Kocks UF, Argon AS, Ashby MF (1975) Thermodynamics and Kinetics of Slip. Pergamon Press, Braunschweig
44. Blum W, Eisenlohr P (2009) Dislocation mechanics of creep. Mater Sci Eng, A 510–511:7–13. https://doi.org/10.1016/j.msea.2008.04.11010.1016/j.msea.2008.04.110 ↗
45. Maiti T, Eisenlohr P (2018) Fourier-based spectral method solution to finite strain crystal plasticity with free surfaces. Scripta Mater 145:37–40. https://doi.org/10.1016/j.scriptamat.2017.09.04710.1016/j.scriptamat.2017.09.047 ↗
46. Wang B, Pan B (2016) Subset-based local vs. finite element-based global digital image correlation: a comparison study. Theor Appl Mech Lett 6(5):200–208. https://doi.org/10.1016/j.taml.2016.08.00310.1016/j.taml.2016.08.003 ↗
47. Every AG, McCurdy AK (1992) Table 3. Cubic system. Elements. In: Nelson DF (ed) The Landolt-Börnstein database, Second and Higher Order Elastic Constants, vol 29a. Springer, Berlin, pp 11–17. https://doi.org/10.1007/10046537_810.1007/10046537_8 ↗
48. Clayton JD (2011) Nonlinear Mechanics of Crystals. Springer Netherlands, Dordrecht. https://doi.org/10.1007/978-94-007-0350-610.1007/978-94-007-0350-6 ↗
49. Ma D et al (2016) Crystal plasticity study of monocrystalline stochastic honeycombs under in-plane compression. Acta Mater 103:796–808. https://doi.org/10.1016/j.actamat.2015.11.01610.1016/j.actamat.2015.11.016 ↗
50. Zhou H et al (2022) Imposing equilibrium on experimental 3-D stress fields using Hodge decomposition and FFT-based optimization. Mech Mater 164:104109. https://doi.org/10.1016/j.mechmat.2021.10410910.1016/j.mechmat.2021.104109 ↗
51. Neuhäuser H (1983) In: Nabarro FRN (ed) Dislocations in Solids. Chap. Slip-Line Formation and Collective Dislocation Motion (vol 6). North-Holland Publishing Company, Amsterdam, pp 319–440
52. Csikor FF et al (2007) Dislocation avalanches, strain bursts, and the problem of plastic forming at the micrometer scale. Science 318(5848):251–254. https://doi.org/10.1126/science.114371910.1126/science.1143719 ↗
53. Weiss J et al (2007) Evidence for universal intermittent crystal plasticity from acoustic emission and high-resolution extensometry experiments. Phys Rev B 76(22):224110. https://doi.org/10.1103/physrevb.76.22411010.1103/physrevb.76.224110 ↗
54. Tang H, Schwarz KW, Espinosa HD (2008) Dislocation-source shutdown and the plastic behavior of single-crystal micropillars. Phys Rev Lett 100(18):185503. https://doi.org/10.1103/PhysRevLett.100.18550310.1103/PhysRevLett.100.185503 ↗
55. Maaß R et al (2015) Slip statistics of dislocation avalanches under different loading modes. Phys Rev E 91(4):042403. https://doi.org/10.1103/physreve.91.04240310.1103/physreve.91.042403 ↗
56. Park J-S, Sharma H, Kenesei P (2021) Repeatability and sensitivity characterization of the far-field high-energy diffraction microscopy instrument at the advanced photon source. J Synchrotron Radiat 28(6):1786–1800. https://doi.org/10.1107/s160057752100828610.1107/s1600577521008286 ↗
57. Beaudoin AJ et al (2017) Bright x-rays reveal shifting deformation states and effects of the microstructure on the plastic deformation of crystalline materials. Phys Rev B 96(17):174116. https://doi.org/10.1103/physrevb.96.17411610.1103/physrevb.96.174116 ↗
58. Sethna JP et al (2017) Deformation of crystals: connections with statistical physics. Annu Rev Mater Res 47(1):217–246. https://doi.org/10.1146/annurev-matsci-070115-03203610.1146/annurev-matsci-070115-032036 ↗
59. Tari V et al (2018) Validation of micro-mechanical FFT-based simulations using high energy diffraction microscopy on Ti-7Al. Acta Mater 154:273–283. https://doi.org/10.1016/j.actamat.2018.05.03610.1016/j.actamat.2018.05.036 ↗
60. Wijnen J et al (2021) A discrete slip plane model for simulating heterogeneous plastic deformation in single crystals. Int J Solids Struct 228:111094. https://doi.org/10.1016/j.ijsolstr.2021.11109410.1016/j.ijsolstr.2021.111094 ↗