journal article·2024-04-08Open access

Constructing Enhanced Composite Solid-State Electrolytes with Sb/Nb Co-Doped LLZO and PVDF-HFP

Jinhai Cai, Yingjie Liu, Yingying Tan, Wanying Chang, Jingyi Wu, Tong Wu, Chunyan Lai

Applied Sciences· Volume 14· Issue 7

Abstract

Composite solid-state electrolytes are viewed as promising materials for solid-state lithium-ion batteries due to their combined advantages of inorganic solid-state electrolytes and solid-state polymer electrolytes. In this study, the solid electrolytes Li6.7−xLa3Zr1.7−xSb0.3NbxO12 (LLZSNO) with Sb and Nb co-doping were prepared by a high-temperature solid-phase method. Results indicate that Sb/Nb co-doping causes lattice deformation in LLZO and increases the lithium vacancy concentration and conductivity of LLZO. Then, with the co-doped LLZSNO as an inorganic filler, a composite solid electrolyte of polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) was prepared with a casting method. The obtained composite solid electrolyte exhibits a high ionic conductivity of 1.76 × 10−4 S/cm at room temperature, a wide electrochemical stable window of 5.2 V, and a lithium-ion transfer number of 0.32. The Li|LiFePO4 coin battery with the composite solid electrolyte shows a high specific capacity of 161.2 mAh/g and a Coulombic efficiency close to 100% at 1 C. In addition, the symmetrical lithium battery Li|Li with the composite electrolyte could cycle stably for about 1500 h without failure at room temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shanghai Key Laboratory of Materials Protection and Advanced Materials in Electric Power, Shanghai University of Electric Power, Shanghai 200090, China

Funding

Science and Technology Commission of Shanghai Municipality

References (39)

Show source-provided references
1. 30 years of lithium-ion batteries10.1002/adma.201800561 ↗
2. A review of composite solid-state electrolytes for lithium batteries: Fundamentals, key materials and advanced structures10.1039/D0CS00305K ↗
3. Garnet solid electrolyte for advanced all-solid-state Li batteries10.1002/aenm.202000648 ↗
4. Break-even analysis of all-solid-state batteries with Li-garnet solid electrolytes10.1021/acsenergylett.1c00672 ↗
5. Design of high-voltage stable hybrid electrolyte with an ultrahigh Li transference number10.1021/acsenergylett.0c02559 ↗
6. Modified Li7La3Zr2O12 (LLZO) and LLZO-polymer composites for solid-state lithium batteries10.1016/j.ensm.2021.04.016 ↗
7. Composite solid electrolytes for all-solid-state lithium batteries10.1016/j.mser.2018.10.004 ↗
8. PEO-Based solid composite polymer electrolyte for high capacity retention all-solid-state lithium metal battery10.1002/smll.202305772 ↗
9. Perspective on design and technical challenges of Li-garnet solid-state batteries10.1080/14686996.2021.2018919 ↗
10. Structural transition in orthorhombic Li5−xHxLa3Nb2O12 garnets induced by a concerted lithium and proton diffusion mechanism10.1039/C7TA10431F ↗
11. Lithium/sulfide all-solid-state batteries using sulfide electrolytes10.1002/adma.202000751 ↗
12. Chong, P., Zhou, Z., Wang, K., Zhai, W., Li, Y., Wang, J., and Wei, M. (2022). The stabilizing of 1T-MoS2 for all-solid-state lithium-ion batteries. Batteries, 9.10.3390/batteries9010026 ↗
13. Graphene-Analogues Boron Nitride Nanosheets Confining Ionic Liquids: A High-Performance Quasi-Liquid Solid Electrolyte10.1002/smll.201600358 ↗
14. Electropositive Metal Doping into Lanthanum Hydride for H− Conducting Solid Electrolyte Use at Room Temperature10.1002/aenm.202301993 ↗
15. Garnet-type solid-state electrolytes: Materials, interfaces, and batteries10.1021/acs.chemrev.9b00427 ↗
16. Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O210.1016/j.jcis.2023.03.116 ↗
17. Progress and perspective of ceramic/polymer composite solid electrolytes for lithium batteries10.1002/advs.201903088 ↗
18. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
19. Unlocking the hidden chemical space in cubic-phase garnet solid electrolyte for efficient quasi-all-solid-state lithium batteries10.1038/s41467-022-35287-1 ↗
20. Experimental corroboration of theory for impedance response of solid electrolytes: Doped cubic garnet LLZO10.1016/j.jelechem.2021.115611 ↗
21. Study of thermal material properties for Ta-and Al-substituted Li7La3Zr2O12 (LLZO) solid-state electrolyte in dependency of temperature and grain size10.1039/D2TA00323F ↗
22. High-energy and durable lithium metal batteries using garnet-type solid electrolytes with tailored lithium-metal compatibility10.1038/s41467-022-29531-x ↗
23. Sheet-like garnet structure design for upgrading PEO-based electrolyte10.1016/j.cej.2021.132343 ↗
24. Unveiling interfacial Li-ion dynamics in Li7La3Zr2O12/PEO (LiTFSI) composite polymer-ceramic solid electrolytes for all-solid-state lithium batteries10.1021/acsami.1c07029 ↗
25. Tailoring inorganic–polymer composites for the mass production of solid-state batteries10.1038/s41578-021-00320-0 ↗
26. Enhanced surface interactions enable fast Li+ conduction in oxide/polymer composite electrolyte10.1002/anie.201914478 ↗
27. A glance at the influence of different dopant elements on Li7La3Zr2O12 garnets10.1007/s11581-021-04152-4 ↗
28. High lithium-ion conductivity in all-solid-state lithium batteries by Sb doping LLZO10.1007/s00339-021-05128-x ↗
29. Effect of dual doping on the structure and performance of garnet-type Li7La3Zr2O12 ceramic electrolytes for solid-state lithium-ion batteries10.1016/j.ceramint.2019.06.002 ↗
30. Synthesis, structure, transport properties, electrochemical stability window, and lithium plating/stripping of Mg and Nb codoped Li7La3Zr2O12 garnet-type solid electrolytes10.1021/acs.jpcc.2c01380 ↗
31. Two-step sintering strategy to prepare dense Li-Garnet electrolyte ceramics with high Li+ conductivity10.1016/j.ceramint.2017.12.217 ↗
32. Avoiding CO2 improves thermal stability at the Interface of Li7La3Zr2O12 electrolyte with layered oxide cathodes10.1002/aenm.202102741 ↗
33. Three-dimensional elemental imaging of Li-ion solid-state electrolytes using fs-laser induced breakdown spectroscopy (LIBS)10.1039/C5JA00250H ↗
34. Enhanced electrochemical performance of Al-and Nb-codoped LLZO ceramic powder and its composite solid electrolyte10.1021/acsaem.1c02644 ↗
35. Revealing atomic-scale ionic stability and transport around grain boundaries of garnet Li7La3Zr2O12 solid electrolyte10.1002/aenm.202102151 ↗
36. Synthesis of Ta and Ca doped Li7La3Zr2O12 solid-state electrolyte via simple solution method and its application in suppressing shuttle effect of Li-S battery10.1016/j.jallcom.2018.02.134 ↗
37. Data mining of molecular dynamics data reveals Li diffusion characteristics in garnet Li7La3Zr2O1210.1038/srep40769 ↗
38. Improvement of density and electrochemical performance of garnet-type Li7La3Zr2O12 for solid-state lithium metal batteries enabled by W and Ta co-doping strategy10.1016/j.mtener.2022.101034 ↗
39. The interface between Li6.5La3Zr1.5Ta0.5O12 and liquid electrolyte10.1016/j.joule.2019.10.001 ↗