Evaluation of Bruising Susceptibility and Response of Pears under Impact Loading through Finite Element Analysis
Source abstract
Abstract
Mechanical damage and bruising of fruit is a critical problem in the food industry. Minimizing brusing and damage can be achieved by designing energy-absorbing structures and packaging systems in order to ensure the long-term quality of fresh produce. The aim of this study is to investigate the response and bruise susceptibility of pears under impact loading conditions through finite element analysis (FEA) methods. In this paper, three impact heights (0.25 m, 0.5 m, and 1.0 m), four impact material surfaces (poplar wood, rubber, cardboard, and acrylonitrile butadiene styrene (ABS) plastic), two packaging sizes (standard 0.22″ and sandwich lattice 2.1″), and three impact design structures (rigid, corrugated, and honeycomb) are considered. Based on mesh sensitivity analysis, a mesh element of 1.5 mm was adopted for all simulations, assuring the accuracy of results and considering the trade-off between mesh size and computational time. The response surface analysis approach was utilized in order to develop predictive empirical models related to pear bruising. Results revealed that the rubber-based impact platform yielded minimal bruise susceptibility at all heights, while standard-sized corrugated cardboard performed best at a height of 0.25 m. Furthermore, single, double, and triple layers of packaging cardboard were tested. We observed that adding a second soft layer of corrugated cardboard reduced the stress on the pear by around 33%. However, adding a third layer only reduced stress by 5%. The 3D-printed honeycomb ABS has potential as protective packaging but would require further investigations and parameter optimization. Stacking multiple layers of cardboard on top of each other is a cost-effective solution that could improve damping and, therefore, ensure good quality and increase the shelf life of the fresh produce. This study will help decision-makers select the optimal energy-absorbing material for cushioning and packaging designs in order to improve the handling and post-harvesting logistics of fresh produce.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Postharvest Quality and Shelf Life Management · Plant Surface Properties and Treatments · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD, UK
Department of Mechanical and Industrial Engineering, Qatar University, Doha P.O. Box 2713, Qatar
Department of Soils, Water & Agricultural Engineering, College of Agricultural & Marine Sciences, Sultan Qaboos University, Muscat 123, Oman
Funding
Qatar University · Sultan Qaboos University
References (39)
Show source-provided references
1. Mechanical Damage of Fresh Produce in Postharvest Transportation: Current Status and Future Prospects10.1016/j.tifs.2022.04.018 ↗
2. Expert Group (2020). A Study of Waste in the Cold Food Chain and Opportunities for Improvement, Expert Group.
3. Ma, L., Zheng, Y., Sang, Z., Ge, Y., Bai, C., Fu, A., Wang, Q., Watkins, C.B., and Zuo, J. (2023). Multi-Omics Analysis Reveals the Mechanism of Calcium-Reduced Quality Deterioration in Mechanically Injured Green Pepper Fruit. Postharvest Biol. Technol., 204.10.1016/j.postharvbio.2023.112437 ↗
4. Satitmunnaithum, J., Kitazawa, H., Arofatullah, N.A., Widiastuti, A., Kharisma, A.D., Yamane, K., Tanabata, S., and Sato, T. (2022). Microbial Population Size and Strawberry Fruit Firmness after Drop Shock-Induced Mechanical Damage. Postharvest Biol. Technol., 192.10.1016/j.postharvbio.2022.112008 ↗
5. Bruise Susceptibility and Impact on Quality Parameters of Pears During Storage10.3389/fsufs.2021.658132 ↗
6. Effects of Bruising and Storage Duration on Physiological Response and Quality Attributes of Pomegranate Fruit10.1016/j.scienta.2020.109306 ↗
7. Investigating Bruise Susceptibility of Pomegranate Cultivars during Postharvest Handling
8. Bruise Damage Measurement and Analysis of Fresh Horticultural Produce—A Review10.1016/j.postharvbio.2013.12.009 ↗
9. Vibrations and Ultrasound in Food Processing–Sources of Vibrations, Adverse Effects, and Beneficial Applications–An Overview10.1016/j.jfoodeng.2021.110875 ↗
10. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges10.1016/j.compositesb.2018.02.012 ↗
11. Influence of Humidity and Temperature on Mechanical Properties of Corrugated Board—Numerical Investigation10.15376/biores.18.4.7490-7509 ↗
12. Evaluation of the Mechanical Properties of Fully Integrated 3D Printed Polymeric Sandwich Structures with Auxetic Cores: Experimental and Numerical Assessment10.1007/s00170-022-10147-w ↗
13. Finite Element Modelling for Fruit Stress Analysis—A Review10.1016/j.tifs.2019.12.029 ↗
14. The Efficacy of Finite Element Analysis (FEA) as a Design Tool for Food Packaging: A Review
15. Determination of Bruise Susceptibility of Pears (Ankara Variety) to Impact Load by Means of FEM-Based Explicit Dynamics Simulation10.1016/j.postharvbio.2017.01.015 ↗
16. Bruise Damage Susceptibility of Pomegranates (Punica Granatum, L.) and Impact on Fruit Physiological Response during Short Term Storage10.1016/j.scienta.2018.11.026 ↗
17. The Effect of Fruit Properties on the Bruise Susceptibility of Tomatoes10.1016/j.postharvbio.2006.12.022 ↗
18. Drop Test of Pear Fruit: Experimental Measurement and Finite Element Modelling10.1016/j.biosystemseng.2016.03.004 ↗
19. Prediction of Bruise Susceptibility of Harvested Kiwifruit (Actinidia Chinensis) Using Finite Element Method10.1016/j.postharvbio.2019.02.013 ↗
20. Nikara, S., Ahmadi, E., and Nia, A.A. (2020). Finite Element Simulation of the Micromechanical Changes of the Tissue and Cells of Potato Response to Impact Test during Storage by Scanning Electron Microscopy. Postharvest Biol. Technol., 164.10.1016/j.postharvbio.2020.111153 ↗
21. FEM Explicit Dynamics Simulation and NIR Hyperspectral Reflectance Imaging for Determination of Impact Bruises of Lycium Barbarum L.10.1016/j.postharvbio.2019.05.024 ↗
22. Guan, X., Li, T., and Zhou, F. (2023). Determination of Bruise Susceptibility of Fresh Corn to Impact Load by Means of Finite Element Method Simulation. Postharvest Biol. Technol., 198.10.1016/j.postharvbio.2022.112227 ↗
23. Mechanical Damages and Packaging Methods along the Fresh Fruit Supply Chain: A Review10.1080/10408398.2022.2078783 ↗
24. Celik, H.K., Ustun, H., Erkan, M., Rennie, A.E.W., and Akinci, I. (2021). Effects of Bruising of ‘Pink Lady’Apple under Impact Loading in Drop Test on Firmness, Colour and Gas Exchange of Fruit during Long Term Storage. Postharvest Biol. Technol., 179.10.1016/j.postharvbio.2021.111561 ↗
25. Development of Engineering Design Tools to Help Reduce Apple Bruising10.1016/j.jfoodeng.2007.03.005 ↗
26. Ashby, M. (2021). Material Property Data for Engineering Materials—ANSYS Granta Edupack 2021, ANSYS.
27. Low Velocity Impact Behavior of Aluminum Honeycomb Structures10.1163/156855109X434810 ↗
28. Replacing Plastic with Corrugated Cardboard: A Carbon Footprint Analysis of Disposable Packaging in a B2B Global Supply Chain—A Case Study10.1016/j.resconrec.2023.106871 ↗
29. Analysis of Damage Caused by Drop Impacts for Mulberry Fruits: An Dropping Experiment and Numerical Simulation10.1111/jfpe.14316 ↗
30. Effect of Wheel-Rail Interface Parameters on Contact Stability in Explicit Finite Element Analysis10.1177/0954409718754941 ↗
31. Modelling Cooling of Packaged Fruit Using 3D Shape Models10.1007/s11947-018-2163-9 ↗
32. Design of Packaging Vents for Cooling Fresh Horticultural Produce10.1007/s11947-012-0883-9 ↗
33. Development of on Line Automatic Separation Device for Apple and Sleeve10.1063/1.5033745 ↗
34. Ni, X., Jiang, H., Wang, L., and Shi, W. (2018, January 31). Kinetics Simulation of the Crucial Points on a Fruit Grading and Packing Line. Proceedings of the 2018 ASABE Annual International Meeting, Dearborn, MI, USA.10.13031/aim.201800497 ↗
35. Finite-Element Simulation with a Homogenization Model and Experimental Study of Free Drop Tests of Corrugated Cardboard Packaging10.1051/meca/2012013 ↗
36. Assessing Guava Maturity by Statistical Analyses of Dropped Fruit Impact Responses10.1016/j.postharvbio.2014.03.013 ↗
37. Measure of Mechanical Impacts in Commercial Blueberry Packing Lines and Potential Damage to Blueberry Fruit10.1016/j.postharvbio.2015.07.013 ↗
38. Stropek, Z., and Gołacki, K. (2020). Bruise Susceptibility and Energy Dissipation Analysis in Pears under Impact Loading Conditions. Postharvest Biol. Technol., 163.10.1016/j.postharvbio.2020.111120 ↗
39. Evaluation of Bruise Resistance of Pears to Impact Load10.1016/j.postharvbio.2015.11.017 ↗