Strength Analysis in Bonded, Bolted and Bolted-Bonded Joints, Single Lap Joints, Metal/Composite Plates
Source abstract
Abstract
Today, especially in many fields that require structural durability, such as the aerospace and automotive industries, there has been a need to use different bonding techniques separately or together in order to use materials together with different mechanical properties. In this study, stress and damage analysis of single lap joints, bonding and bolt-bonding metal/composite joints under tensile loads were performed. The nine kinds of single lap joint models in different combinations (bonded, bolted and bolt-bonded) were prepared by using acrylic adhesive (Acrytron 1E1) and 100-25-3 mm in size; AZ91/AZ91, AZ91-carbon fiber and carbon fiber-carbon fiber plates. Some comparisons were carried out by examining the stresses and deformations that occur in joint models exposed to tensile and 4-point bending tests. As a result of the tensile test, it was determined that the highest maximum tensile stress occurred in AZ91-CF bolt-bonded samples. In the four-point bending test, the maximum shear force value was determined in the CF-CF bolted-bonded samples.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · 3D IC and TSV technologies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Engineering and Natural Sciences Faculty, Gümüşhane University, 29100 Gümüşhane, Turkey
Funding
Gümüşhane University Scientific Research Projects Coordinatorship
References (58)
Show source-provided references
1. Adhesively bonded lap joints from pultruded GFRP profiles. Part I: Stress–strain analysis and failure modes10.1016/j.compositesb.2004.11.001 ↗
2. Niklaus, F., Stemme, G., Lu, J.Q., and Gutmann, R.J. (2006). Adhesive wafer bonding. J. Appl. Phys., 99.10.1063/1.2168512 ↗
3. Brockmann, W., Geiß, P.L., Klingen, J., and Schröder, K.B. (2008). Adhesive Bonding: Materials, Applications and Technology, John Wiley & Sons.10.1002/9783527623921 ↗
4. Ebnesajjad, S. (2011). Handbook of Adhesives and Surface Preparation, William Andrew Publishing.10.1016/B978-1-4377-4461-3.10025-2 ↗
5. Ebnesajjad, S., and Landrock, A.H. (2014). Adhesives Technology Handbook, William Andrew.
6. Metallic glue for ambient environments making strides: Advancements in nanoscience are making it possible to metallically glue two solids together at room temperature, in air, and under a small amount of mechanical pressure
7. Goh, G.D., Yap, Y.L., Agarwala, S., and Yeong, W.Y. (2019). Recent progress in additive manufacturing of fiber reinforced polymer composite. Adv. Mater. Technol., 4.10.1002/admt.201800271 ↗
8. Petrie, E.M. (2007). Handbook of Adhesives and Sealants, McGraw-Hill Education.
9. Da Silva, L.F., Pirondi, A., and Öchsner, A. (2011). Hybrid Adhesive Joints, Springer Science + Business Media.10.1007/978-3-642-16623-5 ↗
10. Mouritz, A.P. (2012). Introduction to Aerospace Materials, Elsevier.10.2514/4.869198 ↗
11. García-Moreno, F. (2016). Commercial applications of metal foams: Their properties and production. Materials, 9.10.3390/ma9020085 ↗
12. Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U., Gude, M., Homberg, W., Martins, P.A.F., and Bobbert, M. (2022). Review on mechanical joining by plastic deformation. J. Adv. Join. Process., 5.10.1016/j.jajp.2022.100113 ↗
13. Adhesive bonding of aircraft structures10.1016/S0143-7496(00)00006-3 ↗
14. The effect of temperature on the mechanical properties of adhesives for the automotive industry
15. Review on adhesive joints and their application in hybrid composite structures10.1080/01694243.2018.1543528 ↗
16. Joining techniques for fiber reinforced polymer composite bridge deck systems10.1016/j.compstruct.2004.07.016 ↗
17. Behaviour under impact of mixed adhesive joints for the automotive industry10.1590/1679-78252762 ↗
18. Advantages and application possibilities of adhesive bonding
19. Adhesive bonding10.1016/0261-3069(88)90006-4 ↗
20. Comparison of the mechanical behaviour between stiff and flexible adhesive joints for the automotive industry10.1080/00218464.2010.482440 ↗
21. Adams, R.D. (2021). Adhesive Bonding: Science, Technology and Applications, Woodhead Publishing.
22. Adams, R.D., Comyn, J., and Wake, W.C. (1997). Structural Adhesive Joints in Engineering, Springer Science & Business Media.
23. Adhesively bonded joints in composite materials: An overview
24. Joining techniques for aluminium spaceframes used in automobiles: Part II—Adhesive bonding and mechanical fasteners10.1016/S0924-0136(99)00361-1 ↗
25. Czerwinski, F. (2011). Magnesium Alloys: Design, Processing and Properties, BoD–Books on Demand.10.5772/560 ↗
26. Adhesion phenomena in bonded joints10.1016/j.ijadhadh.2012.04.007 ↗
27. The role and significance of Magnesium in modern day research-A review10.1016/j.jma.2021.05.012 ↗
28. The role of the magnesium industry in protecting the environment10.1016/S0924-0136(01)00779-8 ↗
29. Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
30. Karaguiozova, Z., Miteva, A., Ciski, A., and Cieślak, G. (2016, January 2–4). Magnesium Application in Aerospace Industry. Proceedings of the 12th Scientific Conference Space Ecology Safety, Sofia, Bulgaria.
31. Cast magnesium alloys for elevated temperature applications10.1007/BF01171534 ↗
32. Mechanical properties and potential applications of magnesium alloys
33. Recent developments in high-pressure die-cast magnesium alloys for automotive and future applications10.1016/j.jma.2022.10.001 ↗
34. Trend of Research and Development for Magnesium Alloys
35. Magnesium alloys development towards the 21st century10.4028/www.scientific.net/MSF.350-351.19 ↗
36. Development and application of magnesium alloy parts for automotive OEMs: A review10.1016/j.jma.2022.12.015 ↗
37. Load transfer in hybrid (bonded/bolted) composite single-lap joints10.1016/j.compstruct.2004.04.016 ↗
38. Strengthening of tensile steel members and bolted joints using adhesively bonded CFRP plates10.1016/j.conbuildmat.2005.06.042 ↗
39. Effect of adherend’s rigidity on the shear strength of single lap adhesive joints10.1016/j.ijadhadh.2010.12.003 ↗
40. Elasto-plastic stress analysis in an adhesively bonded single-lap joint10.1016/j.compositesb.2011.08.006 ↗
41. Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive joints10.1016/j.ijsolstr.2013.09.005 ↗
42. Strength calculation of composite single lap joints with Fiber-Tear-Failure10.1016/j.compositesb.2014.03.004 ↗
43. Failure study of hybrid bonded-bolted composite single and double lap joints
44. A new experimental approach for the estimation of bending moments in adhesively bonded single lap joints10.1016/j.ijadhadh.2014.04.006 ↗
45. Li, X., Tan, Z., Wang, L., Zhang, J., Xiao, Z., and Luo, H. (2020). Experimental investigations of bolted, adhesively bonded and hybrid bolted/bonded single-lap joints in composite laminates. Mater. Today Commun., 24.10.1016/j.mtcomm.2020.101244 ↗
46. 3D explicit finite element analysis of tensile failure behavior in adhesive-bonded composite single-lap joints10.1016/j.compstruct.2018.05.134 ↗
47. Belardi, V.G., Fanelli, P., and Vivio, F. (2021). Analysis of multi-bolt composite joints with a user-defined finite element for the evaluation of load distribution and secondary bending. Compos. Part B Eng., 227.10.1016/j.compositesb.2021.109378 ↗
48. Mechanical behavior and progressive failure analysis of riveted, bonded and hybrid joints with CFRP-aluminum dissimilar materials10.1016/j.tws.2019.03.007 ↗
49. Recent development in aluminium for automotive applications10.1016/S1003-6326(14)63305-7 ↗
50. (2014). Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies (Standard No. ASTM D3165-07).
51. (2008). ASTM Committee D-30 on Composite Materials. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials (Standard No. ASTM 3039).
52. (2005). Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) (Standard No. ASTM D1002).
53. High-cycle fatigue and tensile strength of AZ91 Mg alloy with MAO-epoxy duplex coating
54. Microstructure and mechanical properties of SiCp/AZ91 magnesium matrix composites processed by stir casting
55. Luo, H., Tan, Y., Zhang, F., Zhang, J., Tu, Y., and Cui, K. (2019). Selectively enhanced 3D printing process and performance analysis of continuous carbon fiber composite material. Materials, 12.10.3390/ma12213529 ↗
56. Effect of solution treatment of AZ91 alloy on microstructure, mechanical properties and corrosion behavior of friction stir back extruded AZ91/bioactive glass composite10.1016/j.jmrt.2023.07.123 ↗
57. Li, H., Liebscher, M., Zhao, D., Yin, B., Du, Y., Yang, J., and Mechtcherine, V. (2022). A review of carbon fiber surface modification methods for tailor-made bond behavior with cementitious matrices. Prog. Mater. Sci., 132.10.1016/j.pmatsci.2022.101040 ↗
58. Lu, M., Xiao, H., Liu, M., and Feng, J. (2023). Carbon fiber surface Nano-modification and enhanced mechanical properties of fiber reinforced cementitious composites. Constr. Build. Mater., 370.10.1016/j.conbuildmat.2023.130701 ↗