Heat Transfer Optimization of an Electronic Control Unit Immersed in Forced Liquid Coolant
Source abstract
Abstract
The current paper aims to present a cooling concept for future centralized platforms of ECUs (Electronic Control Units) from the automotive industry that involves grouping multiple electronic devices into a single system and cooling them with forced convection dielectric coolant. The enhancement consists of replacing the inside air of the module with a dielectric coolant that has a higher thermal conductivity than air and employing an additional prototype system that aids in forced liquid cooling. To meet automotive requirements, the experiments were exposed to an ambient temperature of 85 °C. Temperature measurements on these solutions’ hot spots were compared to those on a thermal paste-only reference electronic module. This study used DFSS (Design for Six Sigma) techniques to determine the ideal pump flow rate, fan air flow rate, and liquid volume in the housing, leading to an optimization in heat dissipation. Finding a trustworthy transfer function that could forecast the impact of the crucial design parameters that had been found was the main goal. The electronics cooled by forced convection coolant improved heat dissipation by up to 60% when compared to the reference module. This demonstrates that the DoE (Design of Experiments) method, which is based on a limited number of measurements, can estimate the behavior of the ECU without the need for a more involved theoretical framework.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Refrigeration and Air Conditioning Technologies · Heat Transfer and Optimization · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Machine Manufacturing and Industrial Management, Gheorghe Asachi Technical University of Iasi, 39A D. Mangeron St., 700050 Iasi, Romania
Faculty of Material Science and Engineering, Gheorghe Asachi Technical University of Iasi, 41 D. Mangeron St., 700050 Iasi, Romania
Technical Sciences Academy of Romania, Dacia Blvd 26, 030167 Bucharest, Romania
Romanian Inventors Forum, Str. Sf. P. Movila 3, 700089 Iasi, Romania
National Institute for Research and Development in Environmental Protection (INCDPM), Splaiul Independentei 294, 060031 Bucharest, Romania
Funding
University Scientific Research Fund (FCSU)
References (52)
Show source-provided references
1. Yole Development (2022, November 24). Computing and AI for Automotive. Available online: https://www.yolegroup.com/product/report/computing-and-ai-for-automotive-2022/.
2. McKinsey & Company (2022, November 21). Automotive Software and Electrical/Electronic Architecture: Implications for OEMs. Available online: https://www.mckinsey.de/industries/automotive-and-assembly/our-insights/automotive-software-and-electrical-electronic-architecture-implications-for-oems.
3. Research and Markets (2022, November 18). Automotive Memory Market–Global Outlook and Forecast 2019–2024. Available online: https://www.researchandmarkets.com/reports/4749337/automotive-memory-market-global-outlook-and.
4. Capata, R. (2018). Urban and Extra-Urban Hybrid Vehicles: A Technological Review. Energies, 11.10.3390/en11112924 ↗
5. Mahesh, S.P., Bang, Y.-M., Seo, J.-H., Kim, D.-W., and Lee, M.-Y. (2017, January 26–30). Heat transfer characteristics of electronic control unit heatsink for 72v neighborhood electric vehicle. Proceedings of the Asian Conference on Thermal Sciences 2017, 1st ACTS, Jeju, Republic of Korea.
6. Investigation of thermal management materials for automotive electronic control units10.1016/j.applthermaleng.2010.09.023 ↗
7. Lv, Y.-G., Zhang, G.-P., Wang, Q.-W., and Chu, W.-X. (2022). Thermal Management Technologies Used for High Heat Flux Automobiles and Aircraft: A Review. Energies, 15.10.3390/en15218316 ↗
8. Heat Rejection Limits of Air-Cooled Plane Fin Heat Sinks for Computer Cooling10.1109/TCAPT.2003.811465 ↗
9. van Es, R., Geerlings, A., and Hidding, P. (June, January 30). Various aspects of forced convection cooling of a hard disk drive in a consumer electronics application. Proceedings of the Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, ITHERM 2006, San Diego, CA, USA.
10. Effects of the environmental temperature and heat dissipation condition on the thermal runaway of lithium ion batteries during the charge-discharge process10.1016/j.jlp.2017.05.029 ↗
11. Experimental study on the effect of ambient temperature and discharge rate on the temperature field of prismatic batteries10.1016/j.est.2022.106577 ↗
12. Chu, A., Yuan, Y., Zhu, J., Lu, X., and Zhou, C. (2020). The Design and Investigation of a Cooling System for a High Power Ni-MH Battery Pack in Hybrid Electric Vehicles. Appl. Sci., 10.10.3390/app10051660 ↗
13. Analysis of the heat generation of lithium-ion battery during charging and discharging considering different influencing factors10.1007/s10973-013-3599-9 ↗
14. A review on lithium-ion power battery thermal management technologies and thermal safety10.1007/s11630-017-0955-2 ↗
15. Tennessen, P.T., Weintraub, J.C., and Hermann, W.A. (2011). Extruded and Ribbed Thermal Interface for Use with a Battery Cooling System. (20110212356), U.S. Patent.
16. Legault, M. (2022, November 20). Chevy Volt Battery Pack: Rugged but Precise. Available online: https://www.compositesworld.com/articles/chevy-volt-battery-pack-rugged-but-precise.
17. Kang, S.S. (2012, January 6–8). Advanced Cooling for Power Electronics. Proceedings of the 7th International Conference on Integrated Power Electronics Systems (CIPS), Nuremberg, Germany.
18. Ramakrishnan, B., Alkharabsheh, S., Hadad, Y., Chiarot, P.R., Ghose, K., and Sammakia, B. (2018, January 19–23). Experimental investigation of direct liquid cooling of a two-die package. Proceedings of the 2018 34th Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), San Jose, CA, USA.10.1109/SEMI-THERM.2018.8357351 ↗
19. Chen, H., Han, Y., Tang, G., and Zhang, X. (2019, January 25). Modeling and Deep Explicit Model Predictive Control for Server Processor Direct Liquid Cooling. Proceedings of the 2019 IEEE 21st Electronics Packaging Technology Conference (EPTC), Singapore.10.1109/EPTC47984.2019.9026588 ↗
20. Wei, J. (2007, January 8–12). Challenges in Package Cooling of High Performance Servers. Proceedings of the ASME. International Electronic Packaging Technical Conference and Exhibition ASME 2007 InterPACK Conference, Vancouver, BC, Canada.10.1115/IPACK2007-33637 ↗
21. Integrated micro heat sink for power multichip module10.1109/28.821819 ↗
22. The Challenge of Enhanced Heat Trans fer with Phase Change
23. Harder, J.S., Exel, K., and Meyer, A. (2006, January 7–9). Direct Liquid Cooling of Power Electronics Devices. Proceedings of the 4th International Conference on Integrated Power Systems, Frankfurt am Main, Germany.
24. Varma, D. (2022, July 20). Data Center Cold Wars-Part 2 Two-Phase Versus Single-Phase Immersion Cooling. Available online: https://www.grcooling.com/wp-content/uploads/2020/03/grc-blog-library-tech-comparison-%E2%80%94-two-vs-single-phase-immersion-cooling.pdf.
25. Reliability enhancement by integrated liquid cooling in power IGBT modules for hybrid and electric vehicles10.1016/j.microrel.2014.07.037 ↗
26. Yin, J., Wang, S., Sang, X., Zhou, Z., Chen, B., Thrassos, P., Romeos, A., and Giannadakis, A. (2022). Spray Cooling as a High-Efficient Thermal Management Solution: A Review. Energies, 15.10.3390/en15228547 ↗
27. Prospects of heat transfer approaches to dissipate high heat fluxes: Opportunities and challenges10.1016/j.applthermaleng.2022.118990 ↗
28. Research on spray cooling performance based on battery thermal management10.1002/er.7775 ↗
29. Scott, W.A. (1974). Cooling of Electronic Equipment, John Wiley and Sons–Interscience.
30. Thermal-fluid characterization of alternative liquids of power transformers: A numerical approach10.1109/TDEI.2015.004793 ↗
31. Shah, J.M., Eiland, R., Siddarth, A., and Agonafer, D. (June, January 31). Effects of mineral oil immersion cooling on IT equipment reliability and reliability enhancements to data center operations. Proceedings of the 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, USA.
32. Optimization of immersion cooling performance using the Taguchi Method10.1016/j.csite.2020.100729 ↗
33. Thermal performance and efficiency of a mineral oil immersed server over varied environmental operating conditions10.1115/1.4037526 ↗
34. Reliability Considerations for Oil Immersion-Cooled Data Centers10.1115/1.4042979 ↗
35. Matsuoka, M., Matsuda, K., and Kubo, H. (2017, January 25–27). Liquid immersion cooling technology with natural convection in data center. Proceedings of the IEEE 6th International Conference on Cloud Networking (CloudNet) 2017, Prague, Czech Republic.10.1109/CloudNet.2017.8071539 ↗
36. Immersion cooling for lithium-ion batteries—A review10.1016/j.jpowsour.2022.231094 ↗
37. Thermal performance predictions for an HFE-7000 direct flow boiling cooled battery thermal management system for electric vehicles10.1016/j.enconman.2020.112569 ↗
38. Design of battery packs: Strategies for high energy density and range10.1007/s38314-019-0095-4 ↗
39. Lashbrook, M., Al-Amin, H., and Martin, R. (2017, January 16–17). Natural ester and synthetic ester fluids, applications and maintenance. Proceedings of the Jordan International Electrical and Electronics Engineering Conference (JIEEEC) 2017, Amman, Jordan.10.1109/JIEEEC.2017.8051397 ↗
40. Huang, Z., Wang, F., Wang, Q., Yao, W., Sun, K., Zhang, R., Zhao, J., Lou, Z., and Li, J. (2019). Significantly enhanced electrical performances of eco-friendly dielectric liquids for harsh conditions with fullerene. Nanomaterials, 9.10.3390/nano9070989 ↗
41. Synthetic and natural ester-based nanofluids with fullerene and magnetite nanoparticles–An experimental AC breakdown voltage study10.1016/j.molliq.2022.120802 ↗
42. Havran, P., Cimbala, R., Kurimský, J., Dolník, B., Kolcunová, I., Medveď, D., Király, J., Kohan, V., and Šárpataky, Ľ. (2022). Dielectric properties of electrical insulating liquids for high voltage electric devices in a time-varying electric field. Energies, 15.10.3390/en15010391 ↗
43. Šárpataky, M., Kurimský, J., and Rajňák, M. (2021). Dielectric Fluids for Power Transformers with Special Emphasis on Biodegradable Nanofluids. Nanomaterials, 11.10.3390/nano11112885 ↗
44. Thermophysical and electrokinetic properties of nanofluids—A critical review10.1016/j.applthermaleng.2008.01.005 ↗
45. The influence of the Al deposition by MOC-CVD method on stainless steel thermal conductivity depending on the substrate roughness
46. A theoretical approach of the heat transfer in nanofluids10.2320/matertrans.MRP2007118 ↗
47. Oechslen, S. (2018). Thermische Modellierung Elektrischer Hochleistungsantriebe, Part of the Wissenschaftliche Reihe Fahrzeugtechnik Universität Stuttgart Book Series (WRFUS), Springer.10.1007/978-3-658-22632-9 ↗
48. Bureau of Ships Navy Department (1955). Guide Manual of Cooling Methods for Electronic Equipment, Bureau of Ships Navy Department.
49. Impact of immersion cooling on thermo-mechanical properties of PCB’s and reliability of electronic packages
50. Muslim, J. (2019). Study of Dielectric Liquids as Alternative Encapsulant for High Temperature Electronics Power Modules Applications. [Ph.D. Thesis, Université Grenoble Alpes].
51. Doing More with Less: Cooling Computers with Oil Pays Off
52. Tulkoff, C., and Boyd, C. (2013, January 28–31). Improved Efficiency & Reliability for Data Center Servers Using Immersion Oil Cooling. Proceedings of the Electronic System Technology Conference & Exhibition, Las Vegas, NV, USA.