Design and Optimization of the Inlet Header Structure in Microchannel Heat Exchanger Based on Flow Distribution Uniformity
Source abstract
Abstract
The flow distribution in a printed circuit heat exchanger (PCHE) is of great theoretical and practical significance in the Brayton cycle power generation system. For the straight barrel inlet header PCHE, when S-CO2 flows in the PCHE, the structural types and working parameters of the inlet header and diversion zone may lead to differences in the flow distribution in each channel of the PCHE. This flow distribution difference affects the thermal hydraulic characteristics of the PCHE. A numerical simulation method was applied to explore the flow uniformity of the PCHE and the overall performance and analyze the influence of the type of straight barrel inlet header PCHE. Within each layer, the flow showed an uneven flow distribution, and the optimized inlet header was the tapered type. The results showed that when the taper angle varies from 6° to 9°, the flow distribution in each layer is relatively uniform. The comprehensive heat transfer performance of the straight-channel PCHE can be improved by 17.3–19.7%. Finally, the response surface and a genetic algorithm were combined to optimize the inlet header. The heat transfer performance of the optimized PCHE was improved by 19.7%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Heat Transfer and Optimization · Heat Transfer Mechanisms · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China
National Engineering Research Center for Water Transport Safety (WTS Center, MoST), Wuhan University of Technology, Wuhan 430063, China
School of Naval Architecture, Ocean and Energy Power Engineering, Wuhan University of Technology, Wuhan 430063, China
Key Laboratory of Marine Power Engineering & Technology (MoT), Wuhan University of Technology, Wuhan 430063, China
Funding
High-Tech Ship Research Project of the Ministry of Industry and Information Technology · Fundamental Research Funds for the Central Universities
References (31)
Show source-provided references
1. Research progress on ship power systems integrated with new energy sources: A review10.1016/j.rser.2021.111048 ↗
2. Thermo-economic analysis and multi-objective optimization of S-CO2 Brayton cycle waste heat recovery system for an ocean-going 9000 TEU container ship10.1016/j.enconman.2020.113077 ↗
3. Buoyancy effects on coupled heat transfer of supercritical pressure CO2 in horizontal semicircular channels10.1016/j.ijheatmasstransfer.2019.01.045 ↗
4. Effect of non-uniform heating on scCO(2) heat transfer deterioration10.1016/j.applthermaleng.2020.115967 ↗
5. Thermal-hydraulic performance analysis of printed circuit heat exchanger precooler in the Brayton cycle for supercritical CO2 waste heat recovery10.1016/j.apenergy.2021.117923 ↗
6. A comprehensive review on heat transfer and pressure drop characteristics and correlations with supercritical CO2 under heating and cooling applications10.1016/j.rser.2018.04.106 ↗
7. CFD simulation and optimization of fluid flow distribution inside printed circuit heat exchanger headers10.1080/10407782.2015.1090771 ↗
8. Shape optimization of inlet part of a printed circuit heat exchanger using surrogate modeling10.1016/j.applthermaleng.2013.12.009 ↗
9. The effects of nonuniform inlet fluid conditions on crossflow heat exchanger10.1016/j.ijheatmasstransfer.2017.12.084 ↗
10. Improvements on maldistribution of a high temperature multi-channel compact heat exchanger by different inlet baffles10.1016/j.energy.2014.05.021 ↗
11. Study on hydraulic and thermal performance of printed circuit heat transfer surface with distributed airfoil fins10.1016/j.applthermaleng.2016.11.187 ↗
12. Prediction of flow maldistribution in printed circuit heat exchanger10.1016/j.ijheatmasstransfer.2020.119560 ↗
13. Numerical investigation on thermal hydraulic performance of supercritical LNG in PCHEs with straight, zigzag, and sinusoidal channels10.1007/s12650-021-00804-9 ↗
14. Optimization of inlet part of a microchannel ceramic heat exchanger using surrogate model coupled with genetic algorithm10.1016/j.enconman.2017.04.035 ↗
15. The optimization for the straight-channel PCHE size for supercritical CO2 Brayton cycle10.1016/j.net.2020.12.002 ↗
16. Flow maldistribution in heat exchangers10.1016/S1359-4311(98)00090-8 ↗
17. Experimental investigation of distributor configuration on flow maldistribution in plate-fin heat exchangers10.1016/j.applthermaleng.2015.04.011 ↗
18. A mathematical model for flow maldistribution study in a parallel plate-fin heat exchanger10.1016/j.applthermaleng.2017.03.130 ↗
19. Ke, H.B., Lin, Y.S., Ke, Z.W., Xiao, Q., Wei, Z.G., Chen, K., and Xu, H.J. (2020). Analysis Exploring the Uniformity of Flow Distribution in Multi-Channels for the Application of Printed Circuit Heat Exchangers. Symmetry, 12.10.3390/sym12020314 ↗
20. Experimental Investigation on Port-to-Channel Flow Maldistribution in Plate Heat Exchangers10.1080/01457630601163769 ↗
21. Experimental investigation of header shape and inlet configuration on flow maldistribution in microchannel10.1016/j.expthermflusci.2016.02.004 ↗
22. Characterization and improvement of flow distribution in a vertical dual-compartment header of a microchannel heat exchanger10.1016/j.ijrefrig.2020.03.013 ↗
23. Developing MLP-ICA and MLP Algorithms for Investigating Flow Distribution and Pressure Drop Changes in Manifold Microchannels10.1007/s13369-021-06464-z ↗
24. A new multiscale modeling framework for investigating thermally-induced flow maldistribution in multi-stream plate-fin heat exchangers10.1016/j.ijheatmasstransfer.2021.121779 ↗
25. Thermal hydraulic performance analysis of a printed circuit heat exchanger using a helium-water test loop and numerical simulations10.1016/j.applthermaleng.2011.08.012 ↗
26. The transport properties of carbon dioxide10.1002/aic.690070419 ↗
27. Pressure drop and heat transfer characteristics of a high-temperature printed circuit heat exchanger10.1016/j.applthermaleng.2016.07.149 ↗
28. A review on transient test techniques for obtaining heat transfer design data of compact heat exchanger surfaces10.1016/j.expthermflusci.2010.12.006 ↗
29. Sama, S., Blanco, I., Crescente, G., and Catauro, M. (2020, January 26–28). A Simple Model of Heat Distribution at Various Rayleigh Number in Silicon Elastomer. Proceedings of the 4th International Conference on Progress on Polymers and Composites Products and Manufacturing Technologies (POLCOM), Electr Network, Bucharest, Romania.
30. Numerical study on a novel hyperbolic inlet header in straight-channel printed circuit heat exchanger10.1016/j.applthermaleng.2018.10.027 ↗
31. Experimental and numerical studies of header design and inlet/outlet configurations on flow mal-distribution in parallel micro-channels10.1016/j.applthermaleng.2013.04.026 ↗