Source-Separated Uncertainty Quantification in the Stochastic Plasticity of Cold-Sprayed Al 7075 Using Profilometry-Based Indentation Plastometry and Residual Analysis

1. Beaman JJ, Bourell DL, Seepersad CC, Kovar D (2020) Additive manufacturing review: early past to current practice. J Manuf Sci Eng 142:11081210.1115/1.4048193 ↗

2. DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components––process, structure and properties. Prog Mater Sci 92:11210.1016/j.pmatsci.2017.10.001 ↗

3. Chen W, Voisin T, Zhang Y, Florien J-B, Spadaccini CM, McDowell DL, Zhu T, Wang YM (2019) Evaluation of 16S rRNA gene sequencing for species and strain-level microbiome analysis. Nat Commun 10:110.1038/s41467-018-07882-8 ↗

4. Brown DW, Bernardin JD, Carpenter JS, Clausen B, Spernjak D, Thompson JM (2016) Neutron diffraction measurements of residual stress in additively manufactured stainless steel. Mater Sci Eng A 678:29110.1016/j.msea.2016.09.086 ↗

5. Dean J, Aldrich-Smith G, Clyne TW (2011) Use of nanoindentation to measure residual stresses in surface layers. Acta Mater 59:274910.1016/j.actamat.2011.01.014 ↗

6. Mukherjee T, Zhang W, DebRoy T (2017) An improved prediction of residual stresses and distortion in additive manufacturing. Comput Mater Sci 126:36010.1016/j.commatsci.2016.10.003 ↗

7. Genzel C, Denks IA, and Klaus M (2013) Residual stress analysis by x-ray diffraction methods. In: Modern diffraction methods, Wiley, pp. 127–15410.1002/9783527649884.ch5 ↗

8. Bandyopadhyay R, Gustafson SE, Kapoor K, Naragani D, Pagan DC, Sangid MD (2021) Comparative assessment of backstress models using high-energy X-ray diffraction microscopy experiments and crystal plasticity finite element simulations. Int J Plast 136:10288710.1016/j.ijplas.2020.102887 ↗

9. Chapman MG, Shah MN, Donegan SP, Scott JM, Shade PA, Menasche D, Uchic MD (2021) Challenge 4, 3D reconstruction of an IN625 high-energy diffraction microscopy sample using multi-modal serial sectioning. Integr Mater Manuf Innov 10:12910.1007/s40192-021-00212-9 ↗

10. Collins PC, Brice DA, Samimi P, Ghamarian I, Fraser HL (2016) Microstructural control of additively manufactured metallic materials. Annu Rev Mater Res 46:6310.1146/annurev-matsci-070115-031816 ↗

11. Denlinger ER, Michaleris P (2017) Mitigation of distortion in large additive manufacturing parts. Proc Instit Mechan Eng, Part B: J Eng Manuf 231:98310.1177/0954405415578580 ↗

12. Assadi H, Kreye H, Gärtner F, Klassen T (2016) Cold spraying–a materials perspective. Acta Mater 116:38210.1016/j.actamat.2016.06.034 ↗

13. Bagherifard S, Heydari Astaraee A, Locati M, Nawaz A, Monti S, Kondás J, Singh R, Guagliano M (2020) Design and analysis of additive manufactured bimodal structures obtained by cold spray deposition. Addit Manuf 33:101131

14. Bagherifard S, Kondas J, Monti S, Cizek J, Perego F, Kovarik O, Lukac F, Gaertner F, Guagliano M (2021) Tailoring cold spray additive manufacturing of steel 316 L for static and cyclic load-bearing applications. Mater Des 203:10957510.1016/j.matdes.2021.109575 ↗

15. Chen C, Xie Y, Liu L, Zhao R, Jin X, Li S, Huang R, Wang J, Liao H, Ren Z (2021) Cold spray additive manufacturing of Invar 36 alloy: microstructure, thermal expansion and mechanical properties. J Mater Sci Technol 72:3910.1016/j.jmst.2020.07.038 ↗

16. Zou Y (2021) Cold spray additive manufacturing: microstructure evolution and bonding features. Acc Mater Res 2:107110.1021/accountsmr.1c00138 ↗

17. Paul T, Joshi R, Walde C, Zhang C, Birt A, Pepi M, Agarwal A (2022) Multi-scale elastic behavior of cold sprayed refractory metal from splat to bulk deposit by integrated experimental and modeling approach. Mater Sci Eng, A 853:14375110.1016/j.msea.2022.143751 ↗

18. Yin S, Fan N, Huang C, Xie Y, Zhang C, Lupoi R, Li W (2024) Towards high-strength cold spray additive manufactured metals: methods, mechanisms, and properties. J Mater Sci Technol 170:4710.1016/j.jmst.2023.05.047 ↗

19. Kumar Srivastava A, Kumar N, Rai Dixit A (2021) Friction stir additive manufacturing––an innovative tool to enhance mechanical and microstructural properties. Mater Sci Eng, B 263:11483210.1016/j.mseb.2020.114832 ↗

20. Li W, Yang K, Yin S, Yang X, Xu Y, Lupoi R (2018) Solid-state additive manufacturing and repairing by cold spraying: a review. J Mater Sci Technol 34:44010.1016/j.jmst.2017.09.015 ↗

21. Yin S, Cavaliere P, Aldwell B, Jenkins R, Liao H, Li W, Lupoi R (2018) Cold spray additive manufacturing and repair: fundamentals and applications. Addit Manuf 21:628

22. Russell R, Wells D, Waller J, Poorganji B, Ott E, Nakagawa T, Sandoval H, Shamsaei N, and Seifi M (2019) In Addit. Manuf. Aerosp. Ind., edited by Froes F and Boyer R (Elsevier), pp. 33–6610.1016/B978-0-12-814062-8.00003-0 ↗

23. Seifi M, Gorelik M, Waller J, Hrabe N, Shamsaei N, Daniewicz S, Lewandowski JJ (2017) Progress towards metal additive manufacturing standardization to support qualification and certification. JOM 69:43910.1007/s11837-017-2265-2 ↗

24. Chen Z, Han C, Gao M, Kandukuri SY, Zhou K (2022) A review on qualification and certification for metal additive manufacturing. Virtual Phys Prototyp 17:38210.1080/17452759.2021.2018938 ↗

25. Bae C-J, Diggs AB, and Ramachandran A (2018) In Addit. Manuf., edited by Zhang J and Jung Y-G, Butterworth-Heinemann, pp. 181–21310.1016/B978-0-12-812155-9.00006-2 ↗

26. Chavan NM, Vamshi U, Naik CA, Kumar S, Girish K, Gautam JP (2025) Spatial microstructure in cold sprayed coatings: influence of material properties. J Alloys Compd 1021:17957310.1016/j.jallcom.2025.179573 ↗

27. Hemeda AA, Mishra A, Xu J, Wu CT, Cote D, Siopis M, Nault IM, Champagne VK, Lee S-W, Aindow M, Nardi A, Palko JW, Ma Y (2022) Heterogeneous distribution of mechanical properties of single-particle cold spray impacts. J Therm Spray Technol 31:49810.1007/s11666-022-01334-y ↗

28. Eylon D, Pierce CM (1976) Effect of microstructure on notch fatigue properties of Ti-6Al-4V. Metall Trans A Phys Metall Mater Sci 7:11110.1007/BF02644046 ↗

29. Przybyla CP, McDowell DL (2012) Microstructure-sensitive extreme-value probabilities of high-cycle fatigue for surface vs. subsurface crack formation in duplex Ti–6Al–4V. Acta Mater 60:29310.1016/j.actamat.2011.09.031 ↗

30. Bandyopadhyay R, Sangid MD (2021) A probabilistic fatigue framework to enable location-specific lifing for critical thermo-mechanical engineering applications. Integr Mater Manuf Innov 10:2010.1007/s40192-021-00198-4 ↗

31. Gopalakrishnan S, Bandyopadhyay R, Sangid MD (2022) A framework to enable microstructure-sensitive location-specific fatigue life analysis of components and connectivity to the product lifecycle. Int J Fatigue 165:10721110.1016/j.ijfatigue.2022.107211 ↗

32. Bandyopadhyay R, Stopka KS, Sangid MD (2024) Initializing intragranular residual stresses within statistically equivalent microstructures for crystal plasticity simulations. J Mech Phys Solids 184:10552910.1016/j.jmps.2023.105529 ↗

33. Adams BL, Kalidindi SR, and Fullwood DT (2013) In Microstruct. Sensitive Des. Perform. Optim. Butterworth-Heinemann, Boston, pp. 171–181.10.1016/B978-0-12-396989-7.00008-3 ↗

34. Kouznetsova VG, Geers M, and Brekelmans WAM (2004) Size of a representative volume element in a second-order computational homogenization framework. Int J Multiscale Comput Eng 210.1615/IntJMultCompEng.v2.i4.50 ↗

35. Geers MGD, Kouznetsova VG, Brekelmans WAM (2010) Multi-scale computational homogenization: trends and challenges. J Comput Appl Math 234:217510.1016/j.cam.2009.08.077 ↗

36. Ostoja-Starzewski M and Ranganathan SI (2011) In Math. Methods Models Compos. Imperial College Press, pp. 61–101.

37. Weaver JS and Rosenthal I (2021) Understanding anisotropic tensile properties of laser powder bed fusion additive metals : a detailed review of select examples, National Institute of Standards and Technology (U.S.), Gaithersburg, MD, p. NIST AMS 100–4410.6028/NIST.AMS.100-44 ↗

38. Dantin MJ, Priddy MW (2024) A rate- and temperature-dependent thermomechanical internal state variable model of the directed energy deposition process. J Mater Eng Perform 33:405110.1007/s11665-024-09164-5 ↗

39. Salzbrenner BC, Rodelas JM, Madison JD, Jared BH, Swiler LP, Shen Y-L, Boyce BL (2017) High-throughput stochastic tensile performance of additively manufactured stainless steel. J Mater Process Technol 241:110.1016/j.jmatprotec.2016.10.023 ↗

40. Hay J, Agee P, Herbert E (2010) Continuous stiffness measurement during instrumented indentation testing. Exp Tech 34:8610.1111/j.1747-1567.2010.00618.x ↗

41. Campbell JE, Zhang H, Burley M, Gee M, Fry AT, Dean J, Clyne TW (2021) A critical appraisal of the instrumented indentation technique and profilometry‐based inverse finite element method indentation plastometry for obtaining stress–strain curves. Adv Eng Mater 23:200149610.1002/adem.202001496 ↗

42. Cao YP, Lu J (2004) A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve. Acta Mater 52:402310.1016/j.actamat.2004.05.018 ↗

43. Clyne TW, Campbell JE, Burley M, Dean J (2021) Profilometry‐based inverse finite element method indentation plastometry. Adv Eng Mater 23:210043710.1002/adem.202100437 ↗

44. Tang Y, Campbell J, Burley M, Dean J, Reed R, Clyne T (2021) Profilometry-based indentation plastometry to obtain stress-strain curves from anisotropic superalloy components made by additive manufacturing. Materialia 15:10101710.1016/j.mtla.2021.101017 ↗

45. Tallman AE, Paul T, John D, Agarwal A (2022) Uncertainty quantification of a high-throughput profilometry-based indentation plasticity test of Al 7075 T6 alloy. Front Mater. https://doi.org/10.3389/fmats.2022.91979710.3389/fmats.2022.919797 ↗

46. Campbell JE, Gaiser-Porter M, Gu W, Ooi S, Burley M, Dean J, Clyne TW (2022) Indentation plastometry of very hard metals. Adv Eng Mater 24:210139810.1002/adem.202101398 ↗

47. Zecevic M, Lebensohn RA (2025) Extended FFT-based micromechanical formulation to consider general non-periodic boundary conditions. Int J Solids Struct. https://doi.org/10.1016/j.ijsolstr.2025.11322510.1016/j.ijsolstr.2025.113225 ↗

48. Tallman AE, Yaghoobi M (2024) PRISMS-Indentation: multi-scale elasto-plastic virtual indentation module. Integrat Mater Manuf Innov 13:5310.1007/s40192-023-00332-4 ↗

49. Lim H, Fitzgerald KM, Ruggles TJ, Gilliland WG, Aragon NK, Carroll JD (2025) Quantitative comparison between experiments and crystal plasticity simulations using microstructural clones. Int J Plast 184:104186

50. Bolzon G, Buljak V, Maier G, Miller B (2011) Assessment of elastic–plastic material parameters comparatively by three procedures based on indentation test and inverse analysis. Inverse Probl Sci Eng 19:81510.1080/17415977.2011.551931 ↗

51. Bolzon G, Maier G, Panico M (2004) Material model calibration by indentation, imprint mapping and inverse analysis. Int J Solids Struct 41:295710.1016/j.ijsolstr.2004.01.025 ↗

52. Campbell JE, Thompson RP, Dean J, Clyne TW (2019) Comparison between stress-strain plots obtained from indentation plastometry, based on residual indent profiles, and from uniaxial testing. Acta Mater 168:8710.1016/j.actamat.2019.02.006 ↗

53. Anscombe FJ, Tukey JW (1963) The examination and analysis of residuals. Technometrics 5:14110.1080/00401706.1963.10490071 ↗

54. Hessling JP (2017) Uncertainty quantification and model calibration (BoD–Books on Demand)10.5772/65579 ↗

55. Ogata Y (1988) Statistical models for earthquake occurrences and residual analysis for point processes. J Am Stat Assoc 83:910.1080/01621459.1988.10478560 ↗

56. Baddeley A, Turner R, Møller J, Hazelton M (2005) Residual analysis for spatial point processes (with discussion). J R Stat Soc Ser B Stat Methodol 67:61710.1111/j.1467-9868.2005.00519.x ↗

57. Pagan AR, Hall AD (1983) Diagnostic tests as residual analysis. Econom Rev 2:15910.1080/07311768308800039 ↗

58. Vass M, Hruska K, Franek M (2008) Nitrofuran antibiotics: a review on the application, prohibition and residual analysis. Vet Med (Praha) 53:46910.17221/1979-VETMED ↗

59. Anderson MJ (2006) Distance-based tests for homogeneity of multivariate dispersions. Biometrics 62:24510.1111/j.1541-0420.2005.00440.x ↗

60. Anscombe FJ, Tukey JW (1963) The examination and analysis of residuals. Technometrics 5:14110.1080/00401706.1963.10490071 ↗

61. Harris CR, Millman KJ, van der Walt SJ, Gommers R, Virtanen P, Cournapeau D, Wieser E, Taylor J, Berg S, Smith NJ, Kern R, Picus M, Hoyer S, van Kerkwijk MH, Brett M, Haldane A, del Río JF, Wiebe M, Peterson P, Gérard-Marchant P, Sheppard K, Reddy T, Weckesser W, Abbasi H, Gohlke C, Oliphant TE (2020) Array programming with NumPy. Nature 585:35710.1038/s41586-020-2649-2 ↗

62. Pedregosa F, Varoquaux G, Gramfort A, Michel V, Thirion B, Grisel O, Blondel M, Prettenhofer P, Weiss R, Dubourg V, Vanderplas J, Passos A, Cournapeau D, Brucher M, Perrot M, Duchesnay É (2011) J Mach Learn Res 12:2825–2830

63. Rideout JR, Caporaso G, Bolyen E, McDonald D, Baeza YV, Alastuey JC, Pitman A, Morton J, Zhu Q, Navas J, Gorlick K, Debelius J, Xu Z, Aton M, llcooljohn, Shorenstein J, Luce L, Treuren WV, Chase J, charudatta-navare, Gonzalez A, Brislawn CJ, Patena W, Schwarzberg K, teravest, Reeder J, Sfiligoi I, shiffer1, nbresnick, and Murray DKD (2025)scikit-bio/scikit-bio: scikit-bio 0.6.3 Item Type Software Programmer Jai Ram Rideout Programmer Greg Caporaso Programmer Evan Bolyen Programmer Daniel McDonald Programmer Yoshiki Vázquez Baeza Programmer Jorge Cañardo Alastuey Programmer Anders Pitman Programmer Jamie Morton Programmer Qiyun Zhu Programmer Jose Navas Programmer Kestrel Gorlick Programmer Justine Debelius Programmer Zech Xu Programmer Matt Aton Programmer llcooljohn Programmer Joshua Shorenstein Programmer Laurent Luce Programmer Will Van Treuren Programmer John Chase Programmer charudatta-navare Programmer Antonio Gonzalez Programmer Colin J. Brislawn Programmer Weronika Patena Programmer Karen Schwarzberg Programmer teravest Programmer Jens Reeder Programmer Igor Sfiligoi Programmer shiffer1 Programmer nbresnick Programmer Dr K. D. Murray Abstract We are excited to announce scikit-bio 0.6.3! This is a massive upgrade, despite minor version change. Release highlights include: Significantly improved the tree and phylogenetics module (skbio.tree), with: Optimized the TreeNode class such that it can efficiently handle very large phylogenetic trees. Added, extended and/or optimized many methods of TreeNode. It now features a standard, flexible and scalable API to perform various common tasks in phylogenetics and data science. Refined and expanded tree comparison metrics, including original, weighted, and variants of Robinson-Foulds distances, path / cophenetic distance and variants. Also added driver functions for computing distances between multiple trees. Added and/or optimized minimum evolution (ME) algorithms for phylogenetic reconstruction and rearrangement, including GME (gme), BME (bme), FastNNI, and BNNI (nni). Optimized the canonical neighbor joining (NJ) algorithm (nj) for phylogenetic reconstruction. Refined the I/O system (skbio.io) to improve its efficiency, maintainability and expansibility. Also expanded the tutorial of I/O in scikit-bio. Allowed the user to specify a random seed or random generator for all stochastic algorithms in scikit-bio to ensure reproducibilty. Allowed the user to specify a desired fractional cumulative variance for pcoa. Added support for Python 3.13. Dropped support for Python 3.8. Multiple bug fixes and miscellaneous improvements. Review the changelog for a complete list of the changes. Browse the documentation to learn about what you can do with scikit-bio. Follow @scikitbio for project updates. Thanks for your interest in scikit-bio! Date 2025-01-13 Short Title scikit-bio/scikit-bio Library Catalog Zenodo URL https://zenodo.org/records/14640761 Accessed 7/1/2025, 9:29:02 AM Extra DOI: 10.5281/zenodo.14640761 Company Zenodo Date Added 7/1/2025, 9:29:02 AM Modified 7/1/2025

64. J. D. Bakker, (2024).9:29:11 AM Applied Multivariate Statistics in R Item Type Book Author Jonathan D. Bakker Abstract Applied multivariate statistics Date 2024-01-03 Language en Library Catalog uw.pressbooks.pub URL https://uw.pressbooks.pub/appliedmultivariatestatistics/ Accessed 8/22/2025, 2:45:57 PM Publisher University of Washington Date Added 8/22/2025, 2:45:57 PM Modified 8/22/2025, 2:45:57 PM

65. Judas J, Zapletal J, Adam O, Řehořek L, Jan V (2024) Microstructural stability and precipitate evolution of thermally treated 7075 aluminum alloy fabricated by cold spray. Mater Charact 216:11425910.1016/j.matchar.2024.114259 ↗

66. Donohue BR, Ambrus A, Kalidindi SR (2012) Critical evaluation of the indentation data analyses methods for the extraction of isotropic uniaxial mechanical properties using finite element models. Acta Mater 60:394310.1016/j.actamat.2012.03.034 ↗

67. Acquesta ECS, Portone T, Dandekar R, Rackauckas C, Bandy R, Huerta G, and Dytzel I (2022) Model-form epistemic uncertainty quantification for modeling with differential equations: application to epidemiology. Sandia National Lab (SNL-NM), Albuquerque, NM (United States)10.2172/1888443 ↗

68. Venkatraman A, Johnson CE, McDowell DL, Kalidindi SR (2025) Bayesian protocols for high-throughput identification of kinematic hardening model forms. Int J Mech Sci 285:10979110.1016/j.ijmecsci.2024.109791 ↗

69. Venkatraman A, McDowell DL, Kalidindi SR (2022) Bayesian analysis of parametric uncertainties and model form probabilities for two different crystal plasticity models of lamellar grains in α+β Titanium alloys. Int J Plast 154:10328910.1016/j.ijplas.2022.103289 ↗

70. Tallman AE, Swiler LP, Wang Y, McDowell DL (2020) Uncertainty propagation in reduced order models based on crystal plasticity. Comput Methods Appl Mech Eng 365:11300910.1016/j.cma.2020.113009 ↗

71. Chernatynskiy A, Phillpot SR, LeSar R (2013) Uncertainty quantification in multiscale simulation of materials: a prospective. Annu Rev Mater Res 43:15710.1146/annurev-matsci-071312-121708 ↗

72. McDowell DL (2020) Uncertainty quantification in multiscale materials modeling (Woodhead Publishing)

73. Panchal JH, Kalidindi SR, McDowell DL (2013) Key computational modeling issues in integrated computational materials engineering. Comput Aided Des 45:410.1016/j.cad.2012.06.006 ↗

74. The Minerals, Metals & Materials Society (TMS) (2020)Accelerating the broad implementation of verification & validation in computational models of the mechanics of materials and structures. Pittsburgh, PA www.tms.org/VVaccelerator

75. Morrison M (2014) Values and uncertainty in simulation models. Erkenntnis 79:93910.1007/s10670-013-9537-1 ↗

76. Roy CJ, Oberkampf WL (2011) A comprehensive framework for verification, validation, and uncertainty quantification in scientific computing. Comput Methods Appl Mech Eng 200:213110.1016/j.cma.2011.03.016 ↗

77. Trucano TG, Swiler LP, Igusa T, Oberkampf WL, Pilch M (2006) Calibration, validation, and sensitivity analysis: what’s what. Reliab Eng Syst Saf 91:133110.1016/j.ress.2005.11.031 ↗

78. Council NR (2012) Assessing the reliability of complex models: mathematical and statistical foundations of verification, validation, and uncertainty quantification (National Academies Press)

79. Munday LB, Spencer BW, Tallman A, Kumar MA, Messner M, Chakraborty A, Capolungo L, and Matthews T (2022) Sensitivity study of multiscale and phenomenological elasto-viscoplastic grade 91 material models for component-scale response. Idaho National Laboratory (INL), Idaho Falls, ID (United States)

80. Higham NJ (1988) Computing a nearest symmetric positive semidefinite matrix. Linear Algebra Its Appl 103:10310.1016/0024-3795(88)90223-6 ↗

81. Wikle CK (2017)In: Handbook of uncertainty quantification. Springer, Cham, pp. 193–21810.1007/978-3-319-12385-1_4 ↗

82. Seabold S and Perktold J (2010) In Proc. 9th Python Sci. Conf. (statsmodels, 2010)