3D Printing Approach in Maxillofacial Surgery in Iran: An Evaluation Using the Non-Adoption, Abandonment, Scale-Up, Spread, and Sustainability (NASSS) Framework
Source abstract
Abstract
The integration of 3D printing technology in maxillofacial surgery in Iran represents a significant advancement in medical practice, offering unprecedented precision and efficiency in surgical procedures. Employing the Non-Adoption, Abandonment, Scale-Up, Spread, and Sustainability (NASSS) framework and the WHO Health Systems Framework, this study analyzes the complex impact and challenges of 3D printing adoption within the Iranian healthcare sector. Maxillofacial surgery has seen transformative progress with 3D printing’s ability to produce accurate surgical models and customized implants. The results indicate a notable improvement in surgical precision and patient recovery times, alongside combatting identified barriers including technological access, cost, and skill acquisition. This conclusion underscores the critical need for targeted educational programs, policy support, and infrastructure development to overcome these obstacles. This paper highlights 3D printing’s potential to revolutionize maxillofacial surgery in Iran, provided that comprehensive strategies are implemented to address the current limitations and fully leverage this innovative technology’s benefits.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Anatomy and Medical Technology · Dental Research and COVID-19 · Digital Imaging in Medicine
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Health and Psychological Sciences, Department of Health Services Research and Management, University of London, London WC1E 7HU, UK
Multidisciplinary Department of Medical-Surgical and Dental Specialties, University of Campania Luigi Vanvitelli, 81100 Caserta, Italy
Private Practice Smile Tailor, London EC4R 1EB, UK
Dental School, University of Bolton, Bolton BL3 5AB, UK
Orthodontic Department, Dental School, Cranio-Maxillofacial Research Center, Tehran Medical Sciences, Islamic Azad University, Tehran 1986944768, Iran
References (48)
Show source-provided references
1. Turek, P., Pakla, P., Budzik, G., Lewandowski, B., Przeszłowski, Ł., Dziubek, T., Wolski, S., and Frańczak, J. (2021). Procedure Increasing the Accuracy of Modelling and the Manufacturing of Surgical Templates with the Use of 3D Printing Techniques, Applied in Planning the Procedures of Reconstruction of the Mandible. J. Clin. Med., 10.10.3390/jcm10235525 ↗
2. The NASSS Framework—A Synthesis of Multiple Theories of Technology Implementation
3. Hushie, M., Suhuyini Salifu, R., and Seidu, I. (2021). Contemporary Developments and Perspectives in International Health Security—Volume 1, IntechOpen.
4. Abimbola, S., Patel, B., Peiris, D., Patel, A., Harris, M., Usherwood, T., and Greenhalgh, T. (2019). The NASSS framework for ex post theorisation of technology-supported change in healthcare: Worked example of the TORPEDO programme. BMC Med., 17.10.1186/s12916-019-1463-x ↗
5. Developing a framework for responsible innovation10.1016/j.respol.2013.05.008 ↗
6. Beyond adoption: A new framework for theorizing and evaluating nonadoption, abandonment, and challenges to the scale-up, spread, and sustainability of health and care technologies10.2196/jmir.8775 ↗
7. Winter, P.D., and Chico, T.J.A. (2023). Using the Non-Adoption, Abandonment, Scale-Up, Spread, and Sustainability (NASSS) Framework to Identify Barriers and Facilitators for the Implementation of Digital Twins in Cardiovascular Medicine. Sensors, 23.10.3390/s23146333 ↗
8. (2021, January 05). World Health Organisation. Available online: https://www.who.int/health-topics/cardiovascular-diseases#tab=tab_1.
9. Spread, scale-up, and sustainability of video consulting in health care: Systematic review and synthesis guided by the NASSS framework10.2196/23775 ↗
10. Greenhalgh, T., Wherton, J., Papoutsi, C., Lynch, J., Hughes, G., A’Court, C., Hinder, S., Procter, R., and Shaw, S. (2018). Analysing the role of complexity in explaining the fortunes of technology programmes: Empirical application of the NASSS framework. BMC Med., 16.10.1186/s12916-018-1050-6 ↗
11. Shin, H.D., Hamovitch, E., Gatov, E., MacKinnon, M., Samawi, L., Boateng, R., Thorpe, K.E., and Barwick, M. (2023). The NASSS (Non-Adoption, Abandonment, Scale-Up, Spread and Sustainability) framework use over time: A scoping review. medRxiv, 2023-11.10.1101/2023.11.22.23298897 ↗
12. (2007). Everybody Business: Strengthening Health Systems to Improve Health Outcomes: WHO’s Framework for Action, WHO.
13. World Health Organization (2010). Monitoring the Building Blocks of Health Systems: A Handbook of Indicators and Their Measurement Strategies, World Health Organization.
14. How useful is 3D printing in maxillofacial surgery? Journal of Stomatology, Oral and Maxillofacial Surgery10.1016/j.jormas.2017.07.002 ↗
15. Meyer-Szary, J., Luis, M.S., Mikulski, S., Patel, A., Schulz, F., Tretiakow, D., Fercho, J., Jaguszewska, K., Frankiewicz, M., and Pawłowska, E. (2022). The Role of 3D Printing in Planning Complex Medical Procedures and Training of Medical Professionals—Cross-Sectional Multispecialty Review. J. Clin. Med., 19.10.3390/ijerph19063331 ↗
16. Zoabi, A., Redenski, I., Oren, D., Kasem, A., Zigron, A., Daoud, S., Moskovich, L., Kablan, F., and Srouji, S. (2022). 3D printing and virtual surgical planning in oral and maxillofacial surgery. J. Clin. Med., 11.10.3390/jcm11092385 ↗
17. Analysis of Iran’s National Medical Education Evolution and Innovation Plan using the Michelle and Scott’s model of policymaking
18. Medical 3D printing cost-savings in orthopedic and maxillofacial surgery: Cost analysis of operating room time saved with 3D printed anatomic models and surgical guides10.1016/j.acra.2019.08.011 ↗
19. World Life Expectancy (n.d.) (2023, April 14). Oral Cancer in Iran. Available online: http://worldlifeexpectancy.com/iran-oral-cancer.
20. International Sanctions and the Procurement of Medical Equipment in Iran: A Qualitative Study
21. Three-dimensional printer-assisted reduction genioplasty; surgical guide fabrication
22. Early Assessment of Computer-Assisted Malarplasty: A Novel Methodology for Both Reduction and Augmentation
23. So Near, So Far: Four Decades of Health Policy Reforms in Iran, Achievements and Challenges
24. Institute for Health Metrics and Evaluation (2024, February 17). GBD Compare. [Online] Healthdata.org. Available online: https://vizhub.healthdata.org/gbd-compare/.
25. iPleaders (2023, April 14). What Are the Legal Issues Related to 3D Printing in Medicine and Healthcare. Available online: https://blog.ipleaders.in/what-are-the-legal-issues-related-to-3d-printing-in-medicine-and-healthcare/?amp=1.
26. A Retrospective Analysis of Maxillofacial Trauma in Shiraz, Iran: A 6-Year- Study of 768 Patients (2004–2010)
27. A 5 year Epidemiological Study on Oral and Pharyngeal Cancers from Cancer Registration Centers in Tehran
28. Analysis of the pattern of maxillofacial fractures in north western of Iran: A retrospective study10.4103/0974-2700.76837 ↗
29. 3D Printing: Towards the Future of Oral and Maxillofacial Surgery10.31080/ASDS.2020.04.0870 ↗
30. Jones, A., and Griffin, J. (2020). 3D Printing and the Right to Privacy: Proposals for a Regulatory Framework. Eur. J. Law Technol., 11, Available online: https://ejlt.org/index.php/ejlt/article/view/743.
31. Madeleine, P. (2023, April 14). The Integration of 3D Printing in Hospitals. 3Dnatives. Available online: https://www.3dnatives.com/en/the-integration-of-3d-printing-in-hospitals-190920224/amp.
32. The impact of 3D printing on oral and maxillofacial surgery10.2217/3dp-2022-0025 ↗
33. Are Virtually Designed 3D Printed Surgical Splints Accurate Enough for Maxillary Reposition as an Intermediate Orthognathic Surgical Guide10.1007/s12663-023-01942-3 ↗
34. 3D printing and its applications in oral and maxillofacial surgery
35. Fused Deposition modeling 3d printing in Oral and Maxillofacial surgery: Problem and solutions
36. (2024, February 17). First Maxillofacial Surgery with 3D Printer in Iran. Available online: https://financialtribune.com/articles/people/16945/first-maxillofacial-surgery-with-3d-printer-in-iran.
37. Accuracy of desktop versus professional 3D prnters for maxillofacial model production. A systematic review and meta-analysis10.1016/j.jdent.2021.103741 ↗
38. The Use of Patient-Specific Implants in Oral and Maxillofacial Surgery10.1016/j.coms.2019.07.010 ↗
39. Mandibular Rami Implant: A New Approach in Mandibular Reconstruction10.1016/j.joms.2017.06.001 ↗
40. 3D Printing-Encompassing the Facets of Dentistry
41. Pillai, S., Upadhyay, A., Khayambashi, P., Farooq, I., Sabri, H., Tarar, M., Lee, K.T., Harb, I., Zhou, S., and Wang, Y. (2021). Dental 3D-Printing: Transferring Art from the Laboratories to the Clinics. Polymers, 13.10.3390/polym13010157 ↗
42. Ostaș, D., Almășan, O., Ileșan, R.R., Andrei, V., Thieringer, F.M., Hedeșiu, M., and Rotar, H. (2022). Point-of-care virtual surgical planning and 3D printing in oral and cranio-maxillofacial surgery: A narrative review. J. Clin. Med., 11.10.3390/jcm11226625 ↗
43. Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review10.1016/j.surg.2015.12.017 ↗
44. RegDesk (n.d.) (2023, April 14). Iran Medical Device Regulations. Available online: https://www.regdesk.co/resource-library/iran/amp/.
45. Information needs assessment of medical equipment offices based on Critical Success Factors (CSF) and Business System Planning (BSP) methods
46. irimc.org (n.d.) (2023, April 14). IRI Medical Council > Regulations > Dentistry Education. Available online: https://irimc.org/en/Regulations/Dentistry-Education.
47. Applications of 3D printing in oral and maxillofacial surgery
48. Tooth-borne distraction osteogenesis versus conventional Le Fort I in maxillary advancement of cleft lip and palate patients