Spindle Error Movements and Their Measurement
Source abstract
Abstract
The spindle of a machine tool is an important component of the machine. Its condition affects not only operation of the machine tool but also, above all, the quality of the workpiece. This paper explains the terminology and describes the research methods used to measure the spindle error movements of cutting machine tools. This article explains the impact of spindle motion inaccuracies on the quality of workpieces, quotes the requirements of European and American standards, and describes the current state and directions of development of the presented methods. Our own research work in this field is also presented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced machining processes and optimization · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Production Engineering, Warsaw University of Technology, 02-524 Warsaw, Poland
References (49)
Show source-provided references
1. Marsh, E.R. (2010). Precision Spindle Metrology, DEStech Publications, Inc.
2. ANSI/ASME_B89.3.4 (1992). Axes of Ratation: Methods for Specyfying and Testing, The American Society of Mechanical Engineers.
3. ISO_230-7 (2006). Test Code for Machine Tools. Part 7: Geometric Accuracy of Axes of Rotation, ISO (International Organization for Standardization).
4. Spindle error movements measurement algorithm and a new method of result analysis
5. System and methods for testing machine tools
6. ANSI/ASME_B5.57 (1998). Methods for Performance Evaluation of CNC Turning Centers, ANSI/ASME.
7. ANSI/ASME_B5.54 (2005). Methods for Performance Evaluation of CNC Machining Centers, ANSI/ASME.
8. ISO_203-3 (2007). Test Code for Machine Tools Part 3. Determination of Thermal Effects, ISO.
9. Errant Performer or Scapegoat
10. IDEMA (1991). Asynchronus Spindle Error Measurement, IDEMA STANDARDS (The International Disk Drive Equipment and Materials Association).
11. A simple method for separating spindle error from test ball error
12. Four-Point Method of Roundness and Spindle Error Measurements10.1016/S0007-8506(07)62517-7 ↗
13. Self-Calibration: Reversal, Redundancy, Error Separation, and ‘Absolute Testing’10.1016/S0007-8506(07)60515-0 ↗
14. A new multiprobe method of roundness measurements10.1016/0141-6359(96)00006-2 ↗
15. A hybrid three-probe method for measuring the roundness error and the spindle error10.1016/j.precisioneng.2016.03.020 ↗
16. A novel multi-probe method for separating spindle radial error from artifact roundness error10.1007/s00170-017-0533-5 ↗
17. An experimental investigation of spindle rotary error on high-speed machining center10.1007/s00170-013-5270-9 ↗
18. An identification method for spindle rotation error of a diamond turning machine based on the wavelet transform from artifact roundness error10.1007/s00170-012-3923-8 ↗
19. Effect of preload on running accuracy of spindle10.1016/0890-6955(89)90058-8 ↗
20. Error motion of a kinematic spindle10.1016/j.precisioneng.2003.11.001 ↗
21. ISO ICS 25.080.01 (2006). Machine Tools in General, ISO (International Organization for Standardization).
22. Spindle Error Analyzer System (2020, October 21). Lion Precision. Available online: https://www.lionprecision.com/spindle-error-analyzer-system/.
23. Wang, C. (2004). A New Laser Non-Contact Method for the Measurement of Spindle Error Motion, Optodyne Inc.
24. (2021, January 15). Optodyne Inc./Technical Articles. Available online: http://www.optodyne.com/opnew5/products/mvc500.html.
25. Modeling and error analisis for assessing spindle radial error motions10.1016/S0141-6359(97)00065-2 ↗
26. A method for evaluating spindle rotation errors of machine tools using a laser interferometer10.1016/j.measurement.2007.06.002 ↗
27. Precision Measurement of Multi-Degree-of-Freedom Spindle Errors Using Two-dimensional Slope Sensors10.1016/S0007-8506(07)61557-1 ↗
28. MurakamiI, H., Kawagoishi, N., Kondo, E., and Kodama, A. (2010, January 24–26). Optical Measurement of Five-Degree-of-Freedom Error Motions for a Micro High-Speed Spindle. Proceedings of the 4th CIRP International Conference on High Performance Cutting, Gifu, Japan.
29. The development of a high-speed spindle measurement system using a laser diode and a quadrants sensor10.1016/j.ijmachtools.2004.12.002 ↗
30. Development of a simple test device for spindle error measurement using a position sensitive detector10.1088/0957-0233/15/9/009 ↗
31. A New Approach to Spindle Radial Error Evaluation Using a Machine Vision System10.1515/mms-2017-0018 ↗
32. 2D Dynamic Spindle Radial Error Motion Analysis Using Fourier Series in Polar Domain10.18280/i2m.190210 ↗
33. Three Degrees-of-Freedom Optical Spindle Error Motion Measurement Device
34. Wang, K., and Morse, E. (2002). Correlation of Spindle Errors to Piece-Part Accuracy, Center for Precision Metrology, The University of North Carolina at Charlotte.
35. Morse, E., and Wang, K. (1998). Using Alternative Artifacts for Error Motion Analysis, Center for Precision Metrology, The University of North Carolina at Charlotte.
36. Sarhan, A.A.D., Hassan, M.A., Matsubara, A., and Hamdi, M. (2011, January 6–8). Compensation of Machine Tool Spindle Error Motions in the Radial Direction for Accurate Monitoring of Cutting Forces Utilizing Sensitive Displacement Sensors. Proceedings of the World Congress on Engineering, London, UK.
37. A new method to quantify radial error of a motorized end-milling cutter/spindle system at very high speed rotations10.1016/j.ijmachtools.2005.04.021 ↗
38. Experiences with the master axis method for measuring spindle error motions10.1016/S0141-6359(99)00027-6 ↗
39. A new method for characterizing axis of rotation radial error motion: Part 1. Two-dimensional radial error motion theory10.1016/j.precisioneng.2010.08.005 ↗
40. A new method for characterizing axis of rotation radial error motion: Part 2. Experimental results10.1016/j.precisioneng.2010.08.006 ↗
41. In Situ Measurement of Spindle Radial and Tilt Error Motions by Complementary Multi-probe Method10.1007/s41871-019-00051-5 ↗
42. A novel measuring module for spindle rotational accuracy based on virtual instrument10.1177/1687814017730754 ↗
43. Error Motion Analysis of Machine Spindle Under Load10.17973/MMSJ.2015_12_201554 ↗
44. 21st International Conference ENGINEERING MECHANICS. Analysis of Machine Tool Spindles under Load10.4028/www.scientific.net/AMM.821.608 ↗
45. Measurement uncertainty propagation in spindle error separation techniques—Investigation by means of stochastic spectral method10.1016/j.ijmachtools.2019.03.006 ↗
46. Influence of ultra-precision flycutting spindle error on surface frequency domain error formation10.1007/s00170-016-9024-3 ↗
47. Hu, G., Chen, Y., Cui, L., Jin, G., Wang, T., Qi, H., and Tian, Y. (2020). Investigation on Modeling and Formation Mechanism of Dynamic Rotational Error for Spindle-Rolling Bearing System. Appl. Sci., 10.10.3390/app10175753 ↗
48. Rotation error measurement technology and experimentation research of high-precision hydrostatic spindle10.1007/s00170-014-5905-5 ↗
49. Badania błednych ruchów wrzecion szlifierek