Effect of Carbonation Curing on Physical and Durability Properties of Cementitious Materials Containing AOD Slag
Source abstract
Abstract
In this study, the physical and durability properties of cementitious materials containing stainless steel argon-oxygen decarburization (AOD) slag were investigated by CO2 curing. Three contents (0, 30, 60%) of ordinary Portland cement (OPC) were replaced with AOD slag. Specimens were cured at four CO2 concentrations and three temperatures. The chloride diffusion coefficient, drying shrinkage, compressive strength, and porosity were measured. The drying shrinkage reduction was proportional to CO2 uptake. The chloride diffusion coefficient increased as contents of the AOD slag increased. At 15% CO2 concentration, the diffusion coefficient was similar to that of the OPC regardless of the AOD slag substitution rate. The durability of cementitious materials mixed with AOD slag can be improved by CO2 curing and can be used in construction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Korea Conformity Laboratories, Construction Technology Research Center, 199 Gasan Digital 1-ro, Geumcheon-gu, Seoul 08503, Korea
Department of Civil and Environmental Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam-si, Gyeonggi-do 13120, Korea
Funding
National Research Foundation of Korea · Korea Institute of Energy Technology Evaluation and Planning
References (36)
Show source-provided references
1. Designing sustainable concrete mixture by developing a new machine learning technique10.1016/j.jclepro.2020.120578 ↗
2. SP-326: Durability and Sustainability of Concrete Structures (DSCS-2018)
3. Statistical techniques to analyze properties of nanoengineered concrete using recycled coarse aggregates10.1016/j.jclepro.2014.07.045 ↗
4. Sulphate resistance and ecofriendliness of geopolymer concretes
5. Long term strength and durability parameters of hardened concrete on partially replacing cement by dried waste marble powder slurry10.1016/j.conbuildmat.2018.12.005 ↗
6. Green concrete: Prospects and challenges10.1016/j.conbuildmat.2017.09.008 ↗
7. Pacheco-Torgal, F., Cabeza, L.F., Labrincha, J., and De Magalhaes, A.G. (2014). Eco-efficient Construction and Building Materials: Life Cycle Assessment (LCA), Eco-Labelling and Case Studies, Woodhead Publishing Limited.
8. Sustainable use of copper slag in self compacting concrete containing supplementary cementitious materials10.1016/j.jclepro.2017.03.031 ↗
9. Method for comprehensive mix design of fly ash geopolymer mortars10.1016/j.conbuildmat.2018.12.185 ↗
10. Use of geopolymer concrete for a cleaner and sustainable environment—A review of mechanical properties and microstructure10.1016/j.jclepro.2019.03.051 ↗
11. Pervious concrete made of alkali activated slag and geopolymers10.1016/j.conbuildmat.2018.09.067 ↗
12. BS: 6699 (1992). Specification for Ground Granulated Blast Furnace Slag for Use with Portland Cement, British Standard Institution.
13. EN 15743 (2009). Supersulfated Cement—Composition, Specification and Conformity Criteria, European Committee for Standardization (CEN).
14. An overview for the utilization of wastes from stainless steel industries10.1016/j.resconrec.2011.03.005 ↗
15. Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability10.1016/j.conbuildmat.2014.12.007 ↗
16. Mineralogical composition of EAF slag and stabilised AOD slag aggregates and dimensional stability of slag aggregate concretes10.1016/j.conbuildmat.2016.04.036 ↗
17. Characteristics of steel slag under different cooling conditions10.1016/j.wasman.2006.08.002 ↗
18. Effect of mechanical activation on the hydraulic properties of stainless steel slags10.1016/j.cemconres.2012.02.016 ↗
19. Development of carbon-capture binder using stainless steel argon-oxygen decarburization slag activated by carbonation10.1016/j.jclepro.2018.01.189 ↗
20. Mechanism and prevention of disintegration of AOD stainless steel slag10.1016/S1006-706X(13)60078-3 ↗
21. Accelerated curing of compacted calcium silicate mortars on exposure to CO210.1111/j.1151-2916.1974.tb11420.x ↗
22. Taylor, H.F.W. (1997). Cement Chemistry, Thomas Telford. [2nd ed.].10.1680/cc.25929 ↗
23. The hardening behavior of γ-C2S binder using accelerated carbonation10.1016/j.conbuildmat.2016.03.208 ↗
24. Effect of accelerated carbonation on AOD stainless steel slag for its valorisation as a CO2-sequestering construction material10.1016/j.cej.2014.02.051 ↗
25. Carbon dioxide fixation via accelerated carbonation of cement-based materials: Potential for construction materials applications10.1016/j.conbuildmat.2018.12.078 ↗
26. ISO 679 (2009). Cement—Test Methods—Determination of Strength, International Organization of Standards.
27. Investigation of microstructure and mechanical performance of carbon-capture binder using AOD stainless steel slag10.1016/j.conbuildmat.2020.118174 ↗
28. NT Build 492 (1999). Concrete, Mortar and Cement-Based Repair Materials: Chloride Migration Coefficient from Non-Steady-State Migration Experiments, Nordtest.
29. Compressive strength development of concrete with different curing time and temperature10.1016/S0008-8846(98)00164-1 ↗
30. Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
31. A maturity approach to estimate compressive strength development of CO2-cured concrete blocks10.1016/j.cemconcomp.2017.10.005 ↗
32. Five year drying of high performance concretes: Effect of temperature and cement-type on shrinkage10.1016/j.cemconres.2017.04.017 ↗
33. Mechanical performance and microstructure of the calcium carbonate binders produced by carbonating steel slag paste under CO2 curing10.1016/j.cemconres.2016.05.013 ↗
34. Changes in microstructure characteristics of cement paste on carbonation10.1016/j.cemconres.2018.04.016 ↗
35. Accelerated carbonation of steel slag monoliths at low CO2 pressure—microstructure and strength development10.1016/j.jcou.2019.10.022 ↗
36. Increasing efficiency of carbon dioxide sequestration through high temperature carbonation of cement-based materials10.1016/j.jclepro.2019.117980 ↗