An Innovative Tubular Thermoelectric Generator (TTEG) for Enhanced Waste Heat Recovery in Industrial and Automotive Applications
Source abstract
Abstract
In response to the growing need for efficient energy conversion technologies, this paper introduces an innovative Tubular Thermoelectric Generator (TTEG), specifically designed for the high-efficiency conversion of waste heat into electrical energy. Unlike conventional flat-plate thermoelectric generators (FTEGs), the TTEG incorporates full-ring thermoelectric elements within a tubular layout, offering a novel approach to thermal energy recovery from fluid-based systems. This design significantly enhances the heat transfer capabilities, thereby improving the efficiency of energy conversion. Moreover, it is optimally tailored for integration into any cylindrical pipe to recapture and repurpose waste heat. Comprehensive simulations and analyses form the core of this study, where the performance of the TTEG is rigorously compared with traditional FTEGs. Under identical conditions of heat exposure, volume, and properties of thermoelectric materials, the TTEG demonstrates a 62.5% increase in output power compared to the TGM1-127-1.0-0.8 thermoelectric module (FTEG). These comparisons highlight the advantages of the tubular design in terms of energy conversion efficiency and practical applicability in various scenarios. The findings reveal that the TTEG not only outperforms its flat-plate counterparts but also presents a scalable and adaptable solution for waste heat recovery in a wide range of industrial and automotive applications. This research contributes to the field of energy science and technology by presenting a detailed experimental setup, complete with reproducible procedures and results. It opens new pathways for the development of more sustainable and efficient energy conversion systems, aligning with the goal of harnessing renewable and sustainable energy sources. The potential applications of this technology in enhancing energy efficiency and reducing environmental impact are vast, making it a significant step forward in the quest for clean and sustainable energy solutions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Innovative Energy Harvesting Technologies · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Mechatronic Engineering, National Taiwan Ocean University, Keelung 20224, Taiwan
Funding
National Science and Technology Council of Taiwan
References (47)
Show source-provided references
1. A review of car waste heat recovery systems utilising thermoelectric
2. Hendricks, T., and Choate, W.T. (2006). Engineering Scoping Study of Thermoelectric Generator Systems for Industrial Waste Heat Recovery, Pacific Northwest National Lab. (PNNL).10.2172/1218711 ↗
3. Energy-Saving Pathways for Thermoelectric Nanomaterial Synthesis: Hydrothermal/Solvothermal, Microwave-Assisted, Solution-Based, and Powder Processing10.1002/advs.202106052 ↗
4. Thermo Electric Generator
5. Dynamic heat exchanger model for performance prediction and control system design of automotive waste heat recovery systems10.1016/j.apenergy.2012.12.060 ↗
6. Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators10.1016/j.apenergy.2010.10.005 ↗
7. A 1 kWe thermoelectric stack for geothermal power generation–Modeling and geometrical optimization10.1016/j.apenergy.2012.05.033 ↗
8. Global energy balance in a diesel engine with a thermoelectric generator10.1016/j.apenergy.2020.115139 ↗
9. Thermal analysis of a thermoelectric generator for light-duty diesel engines10.1016/j.apenergy.2018.05.114 ↗
10. Thermoelectric generators act as renewable energy sources10.1016/j.clema.2021.100030 ↗
11. Nanostructured Thermoelectrics: The New Paradigm?10.1021/cm902195j ↗
12. Recent developments in nanostructured materials for high-performance thermoelectrics10.1039/c0jm01193b ↗
13. High Performance Thermoelectrics from Earth-Abundant Materials: Enhanced Figure of Merit in PbS by Second Phase Nanostructures10.1021/ja208658w ↗
14. Current Status of Nanostructured Thermoelectric Materials for Mid-High Temperature Applications10.31613/ceramist.2019.22.2.04 ↗
15. Jaldurgam, F.F., Ahmad, Z., and Touati, F. (2021). Low-toxic, earth-abundant nanostructured materials for thermoelectric applications. Nanomaterials, 11.10.3390/nano11040895 ↗
16. Novel principles and nanostructuring methods for enhanced thermoelectrics10.1002/smll.201702013 ↗
17. Engineering nanostructural routes for enhancing thermoelectric performance: Bulk to nanoscale10.3389/fchem.2015.00063 ↗
18. Energy harvesting performance of hexagonal shaped thermoelectric generator for passenger vehicle applications: An experimental approach10.1016/j.enconman.2018.01.032 ↗
19. Application of compact thermoelectric generator to hybrid electric vehicle engine operating under real vehicle operating conditions10.1016/j.enconman.2019.112150 ↗
20. Bracmort, K., and Sissine, F.J. (2015). Energy Efficiency and Renewable Energy (EERE): Appropriations and the FY2016 Budget Request, Congressional Research Service.
21. A regenerative concept for thermoelectric power generation10.1016/j.apenergy.2016.10.078 ↗
22. Influence of leg sizing and spacing on power generation and thermal stresses of thermoelectric devices10.1016/j.apenergy.2015.08.112 ↗
23. The impact of thermoelectric leg geometries on thermal resistance and power output10.1063/1.5115044 ↗
24. Effect of heat transfer on the performance of thermoelectric generator-driven thermoelectric refrigerator system10.1016/j.cryogenics.2011.10.007 ↗
25. High performance and thermal stress analysis of a segmented annular thermoelectric generator10.1016/j.enconman.2019.01.064 ↗
26. Performance comparison of annular and flat-plate thermoelectric generators for cylindrical hot source10.1016/j.egyr.2021.01.008 ↗
27. Proposing tube-bundle arrangement of tubular thermoelectric module as a novel air cooler10.1016/j.energy.2020.118428 ↗
28. Enhancement in performance of the tubular thermoelectric generator (TTEG)10.1007/s11664-012-2355-4 ↗
29. Preparation of ring-shaped thermoelectric legs from PbTe powders for tubular thermoelectric modules10.1007/s11664-012-2402-1 ↗
30. Annular thermoelectric generator performance optimization analysis based on concentric annular heat exchanger10.1016/j.energy.2021.122127 ↗
31. High-performance thermoelectric generators for field deployments10.1021/acsami.9b21299 ↗
32. Jang, H., Kim, J.B., Stanley, A., Lee, S., Kim, Y., Park, S.H., and Oh, M.-W. (2020). Fabrication of skutterudite-based tubular thermoelectric generator. Energies, 13.10.3390/en13051106 ↗
33. A novel design of thermoelectric generator for automotive waste heat recovery10.1007/s42154-018-0006-z ↗
34. Performance analysis and optimum operation of a thermoelectric generator by Taguchi method10.1016/j.apenergy.2015.08.025 ↗
35. A model to analyze the device level performance of thermoelectric generator10.1016/j.energy.2016.09.044 ↗
36. Yang, Z., PradoGonjal, J., Phillips, M., Lan, S., Powell, A., Vaqueiro, P., Gao, M., Stobart, R., and Chen, R. (2017). Improved Thermoelectric Generator Performance Using High Temperature Thermoelectric Materials, SAE. SAE Technical Paper: 0148-7191.10.4271/2017-01-0121 ↗
37. Efficiency study of a commercial thermoelectric power generator (TEG) under thermal cycling10.1007/s11664-009-0988-8 ↗
38. The performance and analysis of the thermoelectric generator system used in diesel engines10.1016/j.rser.2016.04.068 ↗
39. Feasibility and performance investigation of a new smart system integrating planar/tubular thermoelectric generators with solar flat plate collector10.1016/j.enconman.2019.111980 ↗
40. Albatati, F., and Attar, A. (2021). Analytical and experimental study of thermoelectric generator (TEG) system for automotive exhaust waste heat recovery. Energies, 14.10.3390/en14010204 ↗
41. Energy and exergy analysis of solar heat pipe based annular thermoelectric generator system10.1016/j.solener.2016.06.031 ↗
42. Multi-parameter optimization and uncertainty analysis of multi-stage thermoelectric generator with temperature-dependent materials10.1016/j.egyr.2021.10.079 ↗
43. Performance enhancement of heat pipes assisted thermoelectric generator for automobile exhaust heat recovery10.1016/j.applthermaleng.2017.09.134 ↗
44. Electrical performance optimization of a transverse-Seebeck-effect-based tubular thermoelectric generator for waste heat recovery10.1016/j.egyr.2022.05.286 ↗
45. Optimum load resistance for a thermoelectric generator system10.1016/j.enconman.2020.113490 ↗
46. Thermoelectric generators for automotive waste heat recovery systems part I: Numerical modeling and baseline model analysis10.1007/s11664-013-2471-9 ↗
47. Duraisamy, S., Sundararaj, M., Raja, K., Poongavanam, G.K., and Selvarasan, I. (2019). Biomass for Bioenergy-Recent Trends and Future Challenges, IntechOpen.