Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference
Source abstract
Abstract
Abstract The Additive Manufacturing Benchmark Test Series (AM Bench) provides rigorous measurement data for validating additive manufacturing (AM) simulations for a broad range of AM technologies and material systems. AM Bench includes extensive in situ and ex situ measurements, simulation challenges for the AM modeling community, and a corresponding conference series. In 2022, the second round of AM Bench measurements, challenge problems, and conference were completed, focusing primarily upon laser powder bed fusion (LPBF) processing of metals, and both material extrusion processing and vat photopolymerization of polymers. In all, more than 100 people from 10 National Institute of Standards and Technology (NIST) divisions and 21 additional organizations were directly involved in the AM Bench 2022 measurements, data management, and conference organization. The international AM community submitted 138 sets of blind modeling simulations for comparison with the in situ and ex situ measurements, up from 46 submissions for the first round of AM Bench in 2018. Analysis of these submissions provides valuable insight into current AM modeling capabilities. The AM Bench data are permanently archived and freely accessible online. The AM Bench conference also hosted an embedded workshop on qualification and certification of AM materials and components.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, Wang CCL, Shin YC, Zhang S, Zavattieri PD (2015) The status, challenges, and future of additive manufacturing in engineering. Comput Aided Des 69:65–89. https://doi.org/10.1016/j.cad.2015.04.00110.1016/j.cad.2015.04.001 ↗
2. Stoudt MR, Lass EA, Ng DS, Williams ME, Zhang F, Campbell CE, Lindwall G, Levine LE (2018) The influence of annealing temperature and time on the formation of δ-phase in additively-manufactured inconel 625. Metall Mater Trans A 49:3028–3037. https://doi.org/10.1007/s11661-018-4643-y10.1007/s11661-018-4643-y ↗
3. Lass EA, Stoudt MR, Williams ME, Katz M, Levine LE, Phan TQ, Gnaeupel-Herold T, Ng DS (2017) Formation of the Ni3Nb δ-phase in stress-relieved inconel 625 produced via laser powder-bed fusion additive manufacturing. Metall Mater Trans A 48:5547–5558. https://doi.org/10.1007/s11661-017-4304-610.1007/s11661-017-4304-6 ↗
4. Levine LE (2016) Software architecture, database development, and model validation: toward a computational benchmark in additive manufacturing. In: Michelle Schwalbe
5. (ed) National Academies of Sciences, Engineering, and Medicine 2016. Predictive theoretical and computational approaches for additive manufacturing: proceedings of a workshop. Washington, National Academies Press pp. 86-88
6. Levine LE, Lane BM, Heigel JC, Migler KB, Stoudt MR, Phan TQ, Ricker RE, Strantza M, Hill MR, Zhang F, Seppala JE, Garboczi EJ, Bain ED, Cole DP, Allen AJ, Fox J, Campbell CE (2020) Outcomes and conclusions from the 2018 AM-Bench measurements, challenge problems, modeling submissions, and conference. Integr Mater Manuf Innov 9:1–15. https://doi.org/10.1007/s40192-019-00164-110.1007/s40192-019-00164-1 ↗
7. Heigel JC, Lane BM, Levine LE (2020) In situ measurements of melt pool length and cooling rate during 3D builds of the metal AM-Bench artifacts. Integr Mater Manuf Innov 9:31–53. https://doi.org/10.1007/s40192-020-00170-810.1007/s40192-020-00170-8 ↗
8. Heigel JC, Lane BM, Levine LE, Phan TQ, Whiting J (2020) In situ thermography of the metal bridge structures fabricated for the 2018 additive manufacturing benchmark test series (AM-Bench 2018). J Res Nat Inst Stand Technol 125:125005. https://doi.org/10.6028/jres.125.00510.6028/jres.125.005 ↗
9. Zhang F, Levine LE, Allen AJ, Young SA, Williams ME, Stoudt MR, Moon K-W, Heigel JC, Ilavsky J (2019) Phase fraction and evolution of additively manufactured (AM) 15–5 stainless steel and inconel 625 AM-bench artifacts. Integr Mater Manuf Innov 8:362–377. https://doi.org/10.1007/s40192-019-00148-110.1007/s40192-019-00148-1 ↗
10. Phan TQ, Strantza M, Hill M, Gnaeupel-Herold G-H, Heigel JC, E’Elia C, DeWald AT, Clausen B, Pagan DC, Ko P, Brown DW, Levine LE (2019) Elastic residual strain and stress measurements and corresponding part deflections of 3D additive manufacturing builds of in625 am-bench artifacts using neutron diffraction, synchrotron X-ray diffraction, and contour method. Integr Mater Manuf Innov 8:318–334. https://doi.org/10.1007/s40192-019-00149-010.1007/s40192-019-00149-0 ↗
11. Stoudt MR, Williams ME, Levine LE, Creuziger SA, Young SA, Heigel JC, Lane BM, Phan TQ (2020) Location-specific microstructure characterization within IN625 additive manufacturing benchmark test artifacts. Integr Mater Manuf Innov 9:54–69. https://doi.org/10.1007/s40192-020-00172-610.1007/s40192-020-00172-6 ↗
12. Lane BM, Heigel JC, Ricker R, Zhirnov I, Khromschenko V, Weaver J, Phan TQ, Stoudt MR, Mekhontsev S, Levine LE (2020) Measurements of melt pool geometry and cooling rates of individual laser traces on IN625 bare plates. Integr Mater Manuf Innov 9:16–30. https://doi.org/10.1007/s40192-020-00169-110.1007/s40192-020-00169-1 ↗
13. Ricker R, Heigel JC, Lane BM, Zhirnov I, Levine LE (2019) Topographic measurement of individual laser tracks in alloy 625 bare plates. Integr Mater Manuf Innov 8:521–536. https://doi.org/10.1007/s40192-019-00157-010.1007/s40192-019-00157-0 ↗
14. Cole DP, Gardea F, Henry TC, Seppala JE, Garboczi EJ, Migler KD, Shumeyko CM, Westrich JR, Orski SV, Gair JL (2020) AMB2018-03: benchmark physical property measurements for material extrusion additive manufacturing of polycarbonate. Integr Mater Manuf Innov 9:358–375. https://doi.org/10.1007/s40192-020-00188-y10.1007/s40192-020-00188-y ↗
15. Bain ED, Garboczi EJ, Seppala JE, Parker TC, Migler KB (2019) AMB2018-04: benchmark physical property measurements for powder bed fusion additive manufacturing of polyamide 12. Integr Mater Manuf Innov 8:335–361. https://doi.org/10.1007/s40192-019-00146-310.1007/s40192-019-00146-3 ↗
16. https://www.nist.gov/ambench
17. Lane BM, Mekhontsev S, Grantham S, Vlasea M, Whiting J, Yeung H, Fox J, Zarobila C, Neira J, McGlauflin M (2016) Design, Developments, and results from the nist additive manufacturing metrology testbed (AMMT). In proceedings of the 26th Annual International Solid Freeform Fabrication Symposium, Austin, pp. 1145–1160.
18. Lane BM, Deisenroth D, Yeung H, Levine LE, Mekhontsev S, Weaver JS (2024) In-Situ Thermography laser powder bed fusion IN718 3D builds for the 2022 additive manufacturing benchmark challenges. For submission to Integr Mater Manuf Innov
19. Phan T, Şeren MH, Das A, Ko P, Nygren K, Levine LE (2024) Elastic residual strain measurements of 3D additively manufactured builds of nickel alloy 718 AM bench 2022 artifacts using energy dispersive synchrotron X-ray diffraction. For submission to Integr Mater Manuf Innov
20. Christopher R. D’Elia, Nicholas A. Bachus, Thomas Gnaupel-Herold, Thien Phan, Amlan Das, Brandon Lane, Lyle Levine, Michael R. Hill, (2024) Mapping of bulk residual stress in the AM-Bench IN718 artifact using diverse measurement techniques. For submission to Integr Mater Manuf Innov
21. Praniewicz MR, Fox J, Tarr J (2023) Part deflection measurements of AM-Bench IN718 3D build artifacts. Integr Mater Manuf Innov 12:386–396. https://doi.org/10.1007/s40192-023-00310-w10.1007/s40192-023-00310-w ↗
22. Levine LE, Williams ME, Creuziger A, Stoudt MR, Young SA, Moon KW, Lane BM (2024) Location-specific microstructure characterization within AM Bench 2022 nickel alloy 718 3D Builds, submitted to Integr Mater Manuf Innov10.1007/s40192-024-00371-5 ↗
23. Zhang F, Johnston-Peck AC, Levine LE, Katz MB, Moon KW, Williams ME, Young SQ, Allen AJ, Borkiewicz O, Ilavsky J (2024) Phase composition and phase transformation of additively manufactured nickel alloy 718 AM bench artifacts. Integr Mater Manuf Innov 13:185–200. https://doi.org/10.1007/s40192-023-00338-y10.1007/s40192-023-00338-y ↗
24. Schwalbach EJ, Chapman MG, Shah MN, Uchic MD, Levine LE, Hrabe N, Kafka OL, Moser NH, Carson R, Belak J (2024) Laser powder bed fusion alloy 625 and alloy 718 3D microstructures for AMB2022–01 and AMB2022–05. For submission to submission to IMMI
25. Deisenroth D, Weaver JS, Yeung H, Mekhontsev S, Lane BM, Levine LE, Laser-scanned tracks and pads and In-situ thermography for the 2022 additive manufacturing benchmark challenges. For submission to Integr Mater Manuf Innov
26. Weaver JS, Deisenroth D, Mekhontsev S, Lane BM, Levine LE (2024) Cross-sectional melt pool geometry of laser scanned tracks and pads on nickel alloy 718 for the 2022 additive manufacturing benchmark challenges. Integr Mater Manuf Innov 13:363–379. https://doi.org/10.1007/s40192-024-00355-510.1007/s40192-024-00355-5 ↗
27. Levine LE, Williams ME, Stoudt MR, Weaver JS, Young SA, Deisenroth D, Lane BM (2024) Location-specific microstructure characterization within AM bench 2022 laser tracks on bare nickel alloy 718 plates. Integr Mater Manuf Innov 13:380–395. https://doi.org/10.1007/s40192-024-00361-710.1007/s40192-024-00361-7 ↗
28. Carson R, Maich A, Knox R, Raghavan N, Shanks K, Matthew Rolchigo M, John Coleman J, Darren Pagan D, Rowenhorst D, Creuziger A, Schwalbach E, Levine L, Turner J, Belak J, Bement M (2024) Microstructural characterization and macro/mesoscale mechanical compression measurements of the inconel 625 AMBench 2018–01 Bridge Part. For submission to Integr Mater Manuf Innov
29. Habib SA, Zuback JS, Weaver JS, Mates SP, Levine LE, Microstructural and mechanical characterization of as-built IN625 at different strain rates. For submission to Integr Mater Manuf Innov
30. Kafka OL, Benzing J, Moser N, Liew LA, Weaver J, Hrabe N (2023) Additive manufacturing benchmark 2022 subcontinuum mesoscale tensile challenge (CHAL-AMB2022-04-MeTT) and summary of predictions. Integr Mater Manuf Innov. https://doi.org/10.1007/s40192-023-00307-510.1007/s40192-023-00307-5 ↗
31. Moser N, Benzing J, Kafka O, Weaver J, Derimow N, Rentz R, Hrabe N (2024) AM bench 2022 macroscale tensile challenge at different orientations (CHAL-AMB2022-04-MaTTO) and summary of predictions. Integr Mater Manuf Innov 13(1):155–174. https://doi.org/10.1007/s40192-023-00333-310.1007/s40192-023-00333-3 ↗
32. Higgins C, Kehe GM, Caplins B, Miller C, Stansbury JW, Zong Y, Killgore JP (2024) AM Bench 2022 Vat Photopolymerization Challenge Data: Resin properties, light engine calibration, and calibration print dimensions (AMB2022–07). For submission to Integr Mater Manuf Innov
33. Simonds BJ, Tanner J, Artusio-Glimpse A, Williams PA, Parab ND, Zhao C, Sun T (2021) The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing. Appl Mater Today 23:101049. https://doi.org/10.1016/j.apmt.2021.10104910.1016/j.apmt.2021.101049 ↗
34. Parab ND, Zhao C, Cunningham R, Escano LI, Fezzaa K, Everhart W, Rollett AD, Chen L, Sun T (2018) Ultrafast X-ray imaging of laser-metal additive manufacturing processes. J Synchrotron Rad 25:1467–1477. https://doi.org/10.1107/S160057751800955410.1107/S1600577518009554 ↗
35. Simonds BJ, Tanner J, Artusio-Glimpse A, Parab ND, Zhao C, Sun T, Williams PA (2024) Ability to simulate laser absorption and melt pool dynamics in solid aluminum: results and insights from the 2022 asynchronous AM-Bench challenge. Integr Mater Manuf Innov. https://doi.org/10.1007/s40192-023-00336-010.1007/s40192-023-00336-0 ↗
36. Turner JA, Belak J, Barton N, Bement M, Carlson N, Carson R, DeWitt S, Fattebert JL, Hodge N, Jibben Z, King W, Levine LE, Newman C, Plotkowski A, Radhakrishnan B, Rolchigo M, Sabau A, Slattery S (2022) Metal additive manufacturing simulation at the fidelity of the microstructure. Int J High Perform Comput Appl 36:13–39. https://doi.org/10.1177/1094342021104255810.1177/10943420211042558 ↗
37. Wilkinson M, Dumontier M, Aalbersberg I et al (2016) The FAIR guiding principles for scientific data management and stewardship. Sci Data 3:160018. https://doi.org/10.1038/sdata.2016.1810.1038/sdata.2016.18 ↗
38. Dima A, Bhaskarla S, Becker C et al (2016) Informatics infrastructure for the materials genome initiative. JOM 68:2053–2064. https://doi.org/10.1007/s11837-016-2000-410.1007/s11837-016-2000-4 ↗
39. The American Society of Mechanical Engineers (2020) Standard for verification and validation in computational solid mechanics. ASME, New York
40. The Minerals, Metals & Materials Society (TMS) (2020) Accelerating the broad implementation of verification and validation in computational models of the mechanics of materials and structures. TMS, Pittsburgh, PA. www.tms.org/VVaccelerator