Nanostructured Black Nickel Coating as Replacement for Black Cr(VI) Finish
Source abstract
Abstract
This work compares different electrodeposition procedures to produce nickel black coatings as greener and less toxic alternatives to Cr(VI)-based coatings used in different applications. Nickel and nickel-plated brass served as substrates in studies with a Hull cell and polarization curves. After a set of comparative experiments, the best electrodeposition procedure was further studied and optimized. Optimal conditions were found with a bath consisting of 75 g/L NiCl2·6H2O + 30 g/L NaCl and a current density of 0.143 A dm−2 applied for 5 min at room temperature. Furthermore, a pre-treatment with 18.5 vol.% of hydrochloric acid in water was found to be necessary to warrant good coating adhesion to the substrate. The black color is attributed to the development of a nanostructured surface that absorbs the incident light. Corrosion testing was performed in 0.5 M NaCl aqueous solution using electrochemical impedance spectroscopy (EIS) and polarization tests.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanoporous metals and alloys · Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
DEMaC—Department of Materials and Ceramic Engineering, CICECO—Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
Leica—Aparelhos Ópticos de Precisão, S.A., Rua da Leica 55, 4760-810 Lousado VNF, Portugal
Funding
FCT · FEDER
References (39)
Show source-provided references
1. Electrochemical deposition of black nickel solar absorber coatings on stainless steel AISI316L for thermal solar cells10.1016/j.solmat.2004.07.045 ↗
2. Characterization of black nickel solar absorber coatings electroplated in a nickel chlorine aqueous solution10.1016/S0927-0248(98)00113-5 ↗
3. Wernick, S., and Pinner, R. (1972). The Surface Treatment and Finishing of Aluminium and Its Alloys, Robert Draper Ltd.
4. Dennis, J.K., and Such, T.E. (1986). Nickel and Chromium Plating, Butterworth&Co.. [2nd ed.].10.1016/B978-0-408-01124-2.50012-7 ↗
5. Black nickel electrodeposition from a modified Watts bath10.1007/s10800-005-9077-8 ↗
6. Characterization of electrodeposited Nickel-Cobalt selective black coatings
7. Characterization of electrochemically deposited Cu-Ni black coatings10.1016/S0025-5408(01)00821-2 ↗
8. XPS and XAES investigations of electrochemically deposited cu-Ni solar selected black coatings on molybdenum substrate10.1023/A:1014704607322 ↗
9. Takadoum, J. (2010). Black coatings: A review. Eur. Phys. J. Appl. Phys., 52.10.1051/epjap/2010155 ↗
10. Lelevic, A., and Walsh, F.C. (2019). Electrodeposition of Ni-P composite coatings: A review. Surf. Coat. Technol., 378.10.1016/j.surfcoat.2019.07.027 ↗
11. Structure-dependent thermal and optical properties of black nickel coatings10.1016/0040-6090(79)90167-6 ↗
12. The optical characteristics of black chrome solar selective films coated by the pulse current electrolysis method10.1016/0927-0248(93)90073-C ↗
13. Popov, B.N., White, R.E., Slavkov, D., and Koneska, Z. (1992). Reduction of chromium (VI) when solar selective black chromium is deposited in the presence of organic additive. J. Electrochem. Soc., 139.10.1149/1.2069206 ↗
14. Formation of black chromate conversion coatings on pure and zinc alloy electrolytic deposits: Role of the main constituents10.1016/S0257-8972(96)03013-7 ↗
15. Dubpernell, G. (1977). Electrodeposition of Chromium from Chromic Acid Solutions, Pergamon Press Inc.
16. A Critical assessment of chromium in the environment10.1080/10643389991259164 ↗
17. Pellerin, C., and Booker, S.M. (2000). Reflections on hexavalent chromium: Health hazards of an industrial heavyweight. Environ. Health Perspect., 108.10.1289/ehp.108-a402 ↗
18. Rahman, Z., and Singh, V.P. (2019). The relative impact of toxic heavy metals (THMs) (arsenic (As), cadmium (Cd), chromium (Cr)(VI), mercury (Hg), and lead (Pb)) on the total environment: An overview. Environ. Monit. Assess., 191.10.1007/s10661-019-7528-7 ↗
19. Vaiopoulou, E., and Gikas, P. (2020). Regulations for chromium emissions to the aquatic environment in Europe and elsewhere. Chemosphere, 254.10.1016/j.chemosphere.2020.126876 ↗
20. The journey traversed in the remediation of hexavalent chromium and the road ahead toward greener alternatives—A perspective10.1016/j.ccr.2016.03.004 ↗
21. Gharbi, O., Thomas, S., Smith, C., and Birbilis, N. (2018). Chromate replacement: What does the future hold?. Mater. Degrad., 2.10.1038/s41529-018-0034-5 ↗
22. Wilbur, S., Abadin, H., Fay, M., Yu, D., Tencza, B., Ingerman, L., Klotzbach, J., and James, S. (2012). Toxicological Profile for Chromium, Agency for Toxic Substances and Disease Registry (US).
23. World Health Organization (1988). Chromium—Environmental Health Criteria nº 61, WHO.
24. World Health Organization (2001). Chapter 6.4—Chromium. Air Quality Guidelines for Europe, WHO Regional Publications. [2nd ed.].
25. Chromium and hexavalent chromium10.1002/jat.2550130315 ↗
26. Nunes, R.A.X., Costa, V.C., Sade, W., Araújo, F.R., and Silva, G.M. (2018). Selective surfaces of black chromium for use in solar absorbers. Mater. Res., 21.10.1590/1980-5373-mr-2017-0556 ↗
27. Optimization and microstructural analysis of black-zinc-coated aluminum solar collector coatings10.1016/0040-6090(84)90387-0 ↗
28. A zinc and manganese phosphate coating on automobile iron castings10.2355/isijinternational.45.1326 ↗
29. Band gap and refractive index determination of Mo-black coatings using several techniques10.1016/0927-0248(95)00021-6 ↗
30. Electrodeposition and characterization of nanostructured black nickel selective absorber coatings for solar–thermal energy conversion10.1007/s10854-014-2195-5 ↗
31. Electrodeposition and characterization of nano-structured black nickel thin films10.1016/S1003-6326(13)62732-6 ↗
32. Delaunois, F., Vitry, V., and Bonin, L. (2019). Electroless Nickel Plating: Fundamentals to Applications, CRC Press. [1st ed.].10.1201/9780429466274 ↗
33. Development of dark Ti(C,O,N) coatings prepared by reactive sputtering10.1016/j.surfcoat.2008.05.039 ↗
34. Multilayered decorative a-C:H/CrC coating on stainless steel10.1016/j.surfcoat.2008.08.046 ↗
35. Deutschen Normen (1978). Galvanisierungsprüfung mit der Hull-Zelle, DIN50957, Deutsches Institut für Normung.
36. Hull, R.O. (1938). Current density range characteristics-Their determination and application. Proc. Am. Electroplat. Soc., 27.
37. I.O. for Standardization (2013). Cross-cut test ISO 2409:2007. Br. Stand. Inst., 3, 9–11.
38. Influence of a metallic nickel interlayer on the performance of solar absorber coatings based on black nickel electrodeposited onto copper10.1016/j.electacta.2016.07.125 ↗
39. Orazem, M.E., and Tribollet, B. (2017). Electrochemical Impedance Specstroscopy, John Wiley & Sons. [2nd ed.].10.1002/9781119363682 ↗