Research on Microhole Processing Technology Based on the Femtosecond-Laser Spiral Trepanning Method
Source abstract
Abstract
Microholes have crucial applications in aerospace, the automotive industry, and other industries. In this study, the microhole processing technology based on the femtosecond-laser spiral trepanning method was investigated. By adjusting the spiral scanning path, laser power distribution, and defocusing amount to control laser energy distribution, an inverted cone hole, straight hole, and normal cone hole were obtained finally. The morphology and element of the microhole were investigated by scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX). The experimental results of the femtosecond-laser spiral trepanning method could achieve fewer impurities. Finally, the formation mechanisms of different microholes are explained in detail. The method is simpler and more efficient than the traditional microhole processing technology. The femtosecond-laser spiral trepanning method with controllable hole roundness, accuracy, and taper has important practical significance in microhole processing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Advanced Surface Polishing Techniques · Ocular and Laser Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Aerospace Engineering, Xiamen University, Xiamen 361005, China
Zhejiang Provincial Engineering Lab of Laser and Optoelectronic Intelligent Manufacturing, Wenzhou University, Wenzhou 325035, China
Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 710119, China
Funding
Laser Manufacturing and Additive Manufacturing Project of National Key Research and Development Program of China · Wenzhou Municipal Key Science and Research Program
References (27)
Show source-provided references
1. The Hotter the Engine, the Better10.1126/science.1179327 ↗
2. Laser drilling of cooling holes in aeroengines: State of the art and future challenges10.1179/026708304225017391 ↗
3. Numerical Study on the Influence of Hole Shape on Film Cooling Effectiveness10.4028/www.scientific.net/AMR.716.699 ↗
4. Huang, W.D., Wu, Z.J., Gong, H.F., Gao, Y., and Li, L.G. (2013). Effect of Nozzle Geometry on Macroscopic Behavior of Diesel Spray in the Near-Nozzle Field, SAE. SAE Technical Paper.10.4271/2013-01-1587 ↗
5. Positioning and navigation system based on machine vision intended for laser-electrochemical micro-hole processing10.1007/s00170-017-0851-7 ↗
6. Effects of micro-hole nozzle and ultra-high injection pressure on air entrainment, liquid penetration, flame lift-off and soot formation of diesel spray flame10.1177/1468087416688805 ↗
7. Femtosecond pulsed laser micromachining of glass substrates with application to microfluidic devices10.1364/AO.43.004584 ↗
8. Graphene “Microdrums” on Freestanding Perforated Thin Membrane for High Sensitivity MEMS Pressure Sensor10.1039/C5NR09274D ↗
9. Cylindrical shockwave-induced compression mechanism in femtosecond laser Bessel pulse micro-drilling of PMMA10.1063/1.4981248 ↗
10. Fractionation by micro-hole pressure screening and hydrocyclone applied to deinking line rationalization and future manufacturing concept10.32964/TJ14.4.268 ↗
11. Two-dimensional two-phase numerical model for tool design in electrochemical machining10.1023/A:1004115303419 ↗
12. Electrochemical machining of the steel 100Cr6 in aqueous NaCl and NaNO3 solutions: Microstructure of surface films formed by carbides10.1016/S0013-4686(01)00561-8 ↗
13. Effect of process parameters on the performance of EDM process with ultrasonic assisted cryogenically cooled electrode10.1016/j.jmapro.2012.05.001 ↗
14. A study on the machining-parameters optimization of wire electrical discharge machining10.1016/S0924-0136(97)00117-9 ↗
15. Holes drilling in gold and silver decahedral nanoparticles by the convergent beam electron diffraction electron beam10.1080/10420150.2014.958747 ↗
16. Advances in rotary ultrasonic machining system for hard and brittle materials10.1177/1687814019895929 ↗
17. Controlling parameters of focused ion beam (FIB) on high aspect ratio micro holes milling10.1007/s00542-013-1912-y ↗
18. Femtosecond Laser Pulses for Drilling the Shaped Micro-Hole of Turbine Blades10.1088/0256-307X/30/4/044202 ↗
19. A New Method of Processing High-Precision Micro-Hole with the Femtosecond Laser
20. Femtosecond and picosecond laser drilling of metals at high repetition rates and average powers10.1364/OL.34.003304 ↗
21. Micro-hole drilling and cutting using femtosecond fiber laser10.1117/1.OE.53.5.051513 ↗
22. Experimental investigation on the spiral trepanning of K24 superalloy with femtosecond laser10.1016/j.optlastec.2017.10.029 ↗
23. Surface effects of hybrid vibration-assisted femtosecond laser system for micro-hole drilling of copper substrate10.1016/S1003-6326(12)61807-X ↗
24. Effects of ultrasonic assistance on microhole drilling based on Nd:YAG laser trepanning10.1016/j.optlastec.2018.05.003 ↗
25. Trepanning drilling of microholes on cemented tungsten carbide using femtosecond laser pulses
26. Effect of high repetition rate on dimension and morphology of micro-hole drilled in metals by picosecond ultra-short pulse laser10.1016/j.optlaseng.2019.105811 ↗
27. High aspect ratio, high-quality microholes in pmma: A comparison between femtosecond laser drilling in air and in vacuum10.1007/s00339-014-8955-5 ↗