journal article·2020-06-01Open access

Water Vapour Promotes CO2 Transport in Poly(ionic liquid)/Ionic Liquid-Based Thin-Film Composite Membranes Containing Zinc Salt for Flue Gas Treatment

Daria Nikolaeva, Sandrine Loïs, Paul Inge Dahl, Marius Sandru, Jolanta Jaschik, Marek Tanczyk, Alessio Fuoco, Johannes Carolus Jansen, Ivo F.J. Vankelecom

Applied Sciences· Volume 10· Issue 11

Abstract

A poly(ionic-liquid) (PIL) matrix can be altered by incorporating additives that will disrupt the polymer chain packing, such as an ionic liquid (IL) and inorganic salts to boost their exploitation as materials for membrane production to be used in CO2 capture. Herein, potential of PIL/IL/salt blends is investigated on the example of poly(diallyldimethyl ammonium) bis(trifluoromethylsulfonyl)imide (P[DADMA][Tf2N]) with N-butyl-N-methyl pyrrolidinium bis(trifluoromethylsulfonyl)imide ([Pyrr14][Tf2N]) and zinc di-bis(trifluoromethylsulfonyl)imide (Zn[Tf2N]2). Composite material with IL and a higher amount of Zn2+ showed an increase in the equilibrium CO2 sorption capacity to 2.77 cm3 (STP)cm −3 bar−1. Prepared blends were successfully processed into thick, dense membranes and thin-film composite membranes. Their CO2 separation efficiency was determined using ideal and mixed-gas feed (vol% CO2 = 50 , dry and with 90% relative humidity). The dominant role of solubility in the transport mechanism is confirmed by combining direct gravimetric sorption measurements and indirect estimations from time-lag experiments. The maximum incorporated amount of Zn2+ salts increased equilibrium solubility selectivity by at least 50% in comparison to the parent PIL. All materials showed increased CO2 permeance values by at least 30% in dry conditions, and 60% in humidified conditions when compared to the parent PIL; the performance of pure PIL remained unchanged upon addition of water vapor to the feed stream. Mixed-gas selectivities for all materials rose by 10% in humidified conditions when compared to dry feed experiments. Our results confirm that the addition of IL improves the performance of PIL-based composites due to lower stiffness of the membrane matrix. The addition of Zn2+-based salt had a marginal effect on CO2 separation efficiency, suggesting that the cation participates in the facilitated transport of CO2.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Membrane Separation and Gas Transport · Ionic liquids properties and applications · Carbon dioxide utilization in catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Membrane Technology Group (MTG), cMACS, Faculty Bio-science Engineering, Celestijnenlaan 200F, 3001 Leuven, Belgium

Materials & Process Engineering, UCLouvain, Place Sainte Barbe 2, 1348 Louvain-la-Neuve, Belgium

SOLVIONIC, Site Bioparc 195, route D’Espagne, BP1169, 31036 Toulouse CEDEX 1, France

SINTEF Industry, Richard Birkelands vei 2B, 7034 Trondheim, Norway

Institute of Chemical Engineering, Polish Academy of Sciences, ul. Bałtycka 5, 44-100 Gliwice, Poland

Institute on Membrane Technology, CNR-ITM, Via P. Bucci 17/C, 87036 Rende (CS), Italy

Funding

Seventh Framework Programme · KU Leuven · the Belgian Federal Government through 430 I.A.P.- P.A.I. grant · Polish Ministry of Science and Higher Education through International 431 Co-financed Project grant · Erasmus Mundus fellowship funded by EACEA

References (78)

Show source-provided references
1. Highly conductive polymer electrolytes prepared by in situ polymerization of vinyl monomers in room temperature molten salts10.1016/S0013-4686(99)00330-8 ↗
2. Poly(ionic liquid)/Ionic Liquid Ion-Gels with High “free” Ionic Liquid Content: Platform Membrane Materials for CO2/Light Gas Separations10.1021/acs.accounts.5b00547 ↗
3. Vollas, A., Chouliaras, T., Deimede, V., Ioannides, T., and Kallitsis, J. (2018). New pyridinium type poly(ionic liquids) as membranes for CO2 separation. Polymers, 10.10.3390/polym10080912 ↗
4. Synthesis and gas separation properties of poly(ionic liquid)-ionic liquid composite membranes containing a copper salt10.1016/j.memsci.2016.05.045 ↗
5. Poly(ionic liquid) composites10.1039/C8CS00938D ↗
6. Combination of ionic liquids with membrane technology: A new approach for CO2 separation10.1016/j.memsci.2015.08.060 ↗
7. Ionic liquid-based materials: A platform to design engineered CO2 separation membranes10.1039/C5CS00510H ↗
8. Zulfiqar, S., Sarwar, M.I., and Mecerreyes, D. (2015). Polymeric ionic liquids for CO2 capture and separation: Potential, progress and challenges. Polym. Chem., 6435–6451.10.1039/C5PY00842E ↗
9. Poly(vinyl ester 1,2,3-triazolium)s: A new member of the poly(ionic liquid)s family10.1039/C4CC08847F ↗
10. Polymeric ionic liquid-based membranes: Influence of polycation variation on gas transport and CO2 selectivity properties10.1016/j.memsci.2015.03.026 ↗
11. Ideal CO2/light gas separation performance of poly(vinylimidazolium) membranes and poly(vinylimidazolium)-ionic liquid composite films10.1021/ie202305m ↗
12. Cholinium-based poly(ionic liquid)s: Synthesis, characterization, and application as biocompatible ion gels and cellulose coatings10.1021/mz400451g ↗
13. Polymeric ionic liquids (PILs): Effect of anion variation on their CO2 sorption10.1016/j.memsci.2011.10.042 ↗
14. Cellulose based poly(ionic liquids): Tuning cation-anion interaction to improve carbon dioxide sorption10.1016/j.fuel.2017.09.057 ↗
15. Grafting cellulose acetate with ionic liquids for biofuel purification membranes: Influence of the anion10.1016/j.carbpol.2018.05.008 ↗
16. The performance of affordable and stable cellulose-based poly-ionic membranes in CO2/N2 and CO2/CH4 gas separation10.1016/j.memsci.2018.07.057 ↗
17. Poly(vinylbenzyl chloride)-based poly(ionic liquids) as membranes for CO2 capture from flue gas10.1039/C7TA05171A ↗
18. Isothermal Carbon Dioxide Sorption in Poly(ionic liquid)s10.1021/ie900292p ↗
19. Film forming polymeric ionic liquids (PILs) based on polybenzimidazoles for CO2 separation10.1039/C3RA44632H ↗
20. Investigation of gas permeation properties of film forming polymeric ionic liquids (PILs) based on polybenzimidazoles10.1016/j.memsci.2014.07.076 ↗
21. Polybenzimidazole based polymeric ionic liquids possessing partial ionic character: Effects of anion exchange on their gas permeation properties10.1016/j.memsci.2015.09.019 ↗
22. Ionic Polyurethanes as a New Family of Poly(ionic liquid)s for Efficient CO2 Capture10.1021/acs.macromol.6b02812 ↗
23. Magnetic suspension balance study of carbon dioxide solubility in ammonium-based polymerized ionic liquids: Poly(p-vinylbenzyltrimethyl ammonium tetrafluoroborate) and poly([2-(methacryloyloxy)ethyl] trimethyl ammonium tetrafluoroborate)10.1016/j.fluid.2007.03.007 ↗
24. Pyrrolidinium-based polymeric ionic liquids as mechanically and electrochemically stable polymer electrolytes10.1016/j.jpowsour.2008.11.115 ↗
25. Pyrrolidinium-based polymeric ionic liquid materials: New perspectives for CO2 separation membranes10.1016/j.memsci.2012.10.044 ↗
26. Novel pyrrolidinium-based polymeric ionic liquids with cyano counter-anions: HIGH performance membrane materials for post-combustion CO2 separation10.1016/j.memsci.2015.02.020 ↗
27. Teodoro, R.M. (2020, May 29). CO2 Separation Using Polymeric Ionic Liquids Membranes: The Effect of Mixing Different Cyano Anions. Available online: https://www.baidu.com/link?url=EyfRrctllSjK7v3C7b_uvtL1ti1PI8WdNDfYTCXmqaJfEj1MtXnK4oFuwuC8hccjr-s-sKKPfP9BiAmdx43NZ3GJoBBC3k95_Scx7TlHMi_CUpVcD_CAorw1mswVL5h6&wd=&eqid=aacd2f350005ec85000000065ed0ad47.
28. Effect of polymer molecular weight on the physical properties and CO2/N2 separation of pyrrolidinium-based poly(ionic liquid) membranes10.1016/j.memsci.2017.12.019 ↗
29. Mixing poly(ionic liquid)s and ionic liquids with different cyano anions: Membrane forming ability and CO2/N2 separation properties10.1016/j.memsci.2018.02.019 ↗
30. New approach for the fabrication of double-network ion-gel membranes with high CO2/N2 separation performance based on facilitated transport10.1016/j.memsci.2017.02.032 ↗
31. Frontiers in poly(ionic liquid)s: Syntheses and applications10.1039/C6CS00620E ↗
32. Modular polymerized ionic liquid block copolymer membranes for CO2/N2 separation10.1039/C4TA00661E ↗
33. Power plant post-combustion carbon dioxide capture: An opportunity for membranes10.1016/j.memsci.2009.10.041 ↗
34. Fixed-site-carrier facilitated transport of carbon dioxide through ionic-liquid-based epoxy-amine ion gel membranes10.1016/j.memsci.2015.05.034 ↗
35. CO2/CH4 separation performance of ionic-liquid-based epoxy-amine ion gel membranes under mixed feed conditions relevant to biogas processing10.1016/j.memsci.2017.01.016 ↗
36. Crichton, R.R. (2008). Zinc: Lewis Acid and Gene Regulator. Biological Inorganic Chemistry, Elsevier.10.1016/B978-044452740-0.50012-0 ↗
37. Rogers, D.M., Jiao, D., Pratt, L.R., and Rempe, S.B. (2012). Structural Models and Molecular Thermodynamics of Hydration of Ions and Small Molecules, Elsevier.10.1016/B978-0-444-59440-2.00004-1 ↗
38. Penders-van Elk, N.J.M.C., and Versteeg, G.F. (2016). Enzyme-enhanced CO2 absorption, Elsevier Ltd.10.1016/B978-0-08-100514-9.00010-X ↗
39. Zinc, cadmium and mercury10.1039/c3ic90016a ↗
40. Efficient, selective and sustainable catalysis of carbon dioxide10.1039/C7GC00199A ↗
41. CO2 Activation over Catalytic Surfaces10.1002/cphc.201700782 ↗
42. Kimura, S.G., Ward, W.J., and Matson, S.L. (1982). Facilitated Separation of a Select Gas Through an Ion Exchange Membrane. (No. 4318714), U.S. Patent.
43. Dziedzic, D., Gross, K.B., Gorski, R.A., and Johnson, J.T. (2006). Sequestration of Carbon Dioxide. (No. 7132090 B2), U.S. Patent.
44. Huang, J., Rüther, T., Feron, P., and Zhang, Z. (2012). Ionic Liquids. (No. 2012/0186993 A1), U.S. Patent.
45. The role of zinc(II) in the absorption-desorption of CO2 by aqueous NH3, a potentially cost-effective method for CO2 capture and recycling10.1002/cssc.200700124 ↗
46. Zinc(II)-catalyzed reactions of carbon dioxide and propargylic alcohols to carbonates at room temperature10.1039/C5GC01870F ↗
47. Coordination chemistry of the bis(trifluoromethylsulfonyl)imide anion: Molecular interactions in room temperature ionic liquids
48. Structural features of ionic liquids: Consequences for material preparation and organic reactivity10.1039/c3gc41313f ↗
49. Carbon dioxide adsorption by zinc-functionalized ionic liquid impregnated into bio-templated mesoporous silica beads10.1016/j.cej.2015.08.006 ↗
50. Influence of Fluorination on the Solubilities of Carbon Dioxide, Ethane, and Nitrogen in 1- n -Fluoro-alkyl-3-methylimidazolium Bis( n -fluoroalkylsulfonyl)amide Ionic Liquids10.1021/acs.jpcb.6b10301 ↗
51. Hydrolysis of Tetrafluoroborate and Hexafluorophosphate Counter Ions in Imidazolium-Based Ionic Liquids10.1021/jp903292n ↗
52. Solubilities of carbon dioxide and oxygen in the ionic liquids methyl trioctyl ammonium bis(trifluoromethylsulfonyl)imide, 1-butyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide, and 1-butyl-3-methyl imidazolium methyl sulfate10.1021/jp5061057 ↗
53. Review Article: Gas and vapor sorption measurements using electronic beam balances10.1116/1.5044552 ↗
54. (2007). IGA Systems User Manual, HA-085-060 Issue: E, Hiden Isochema Limited.
55. Gas transport properties of Pebax®/room temperature ionic liquid gel membranes10.1016/j.seppur.2012.02.041 ↗
56. High throughput study of phase inversion parameters for polyimide-based SRNF membranes10.1016/j.memsci.2008.12.068 ↗
57. Cross-linked polyimide membranes for solvent resistant nanofiltration in aprotic solvents10.1016/j.memsci.2008.04.026 ↗
58. Enzyme Carbonic Anhydrase Accelerated CO2 Absorption in Membrane Contactor10.1016/j.egypro.2017.03.1141 ↗
59. The process of diffusion through a rubber membrane10.1098/rspa.1920.0034 ↗
60. A novel time lag method for the analysis of mixed gas diffusion in polymeric membranes by on-line mass spectrometry: Method development and validation10.1016/j.memsci.2018.04.029 ↗
61. Composite hollow fiber membranes for CO2 capture10.1016/j.memsci.2009.09.039 ↗
62. Electrochemical Behavior of Li2FeSiO4 with Ionic Liquids at Elevated Temperature10.1149/1.3133183 ↗
63. Coordination cages as permanently porous ionic liquids10.1038/s41557-020-0419-2 ↗
64. Structural properties of cation exchange membranes: Characterization, electrolyte effect and solute transfer10.1016/j.memsci.2016.07.031 ↗
65. Hybrids of poly(ethylene oxide-b-amide-6) and ZrO2 Sol-gel: Preparation, characterization, and application in processes of membranes separation10.1002/adv.10011 ↗
66. Phase Behavior and Ionic Conductivity in Lithium Bis(trifluoromethanesulfonyl)imide-Doped Ionic Liquids of the Pyrrolidinium Cation and Bis(trifluoromethanesulfonyl)imide Anion10.1021/jp905783t ↗
67. Phase Behavior of Ionic Liquid–LiX Mixtures: Pyrrolidinium Cations and TFSI–Anions–Linking Structure to Transport Properties10.1021/cm201427k ↗
68. Low-Temperature Phase Transitions of 1-Butyl-1-methylpyrrolidinium Bis(trifluoromethanesulfonyl)imide Swelling a Polyvinylidenefluoride Electrospun Membrane10.1021/jp500668b ↗
69. Restricted access: On the nature of adsorption/desorption hysteresis in amorphous, microporous polymeric materials10.1021/la402630s ↗
70. Effect of “free” cation substituent on gas separation performance of polymer–room-temperature ionic liquid composite membranes10.1021/ie801897r ↗
71. Anion Effects on Gas Solubility in Ionic Liquids10.1021/jp046404l ↗
72. Matteucci, S., Yampolskii, Y., Freeman, B.D., and Pinnau, I. (2006). Transport of Gases and Vapors in Glassy and Rubbery Polymers. Materials Science of Membranes for Gas and Vapor Separation, Wiley.10.1002/047002903X ↗
73. Energy-efficient polymeric gas separation membranes for a sustainable future: A review10.1016/j.polymer.2013.05.075 ↗
74. Correlation aspects of the selective gas permeabilities of polymeric materials and membranes10.1016/0950-4214(90)80030-O ↗
75. Temperature and pressure dependence of gas permeation in amine-modified PIM-110.1016/j.memsci.2018.03.039 ↗
76. Dramatic tuning of carbon dioxide uptake via metal substitution in a coordination polymer with cylindrical pores10.1021/ja8036096 ↗
77. Temperature Dependence of Gas Transport in Polymer Melts: Molecular Dynamics Simulations of CO2 in Polyethylene10.1021/ma991737f ↗
78. Thornton, A., Robeson, L.M., and Freeman, B.D. (2012). CO2/N2 Gas Separation Polymers. Membr. Soc. Australas., Available online: https://membrane-australasia.org/msa-activities/polymer-gas-separation-membrane-database/.