Crystallographic texture evolution in 1008 steel sheet during multi-axial tensile strain paths
Source abstract
Abstract
Abstract This paper considers the crystallographic texture evolution in a 1008 low carbon steel. The texture evolution along uniaxial, plane strain and balanced biaxial strain states were measured. For uniaxial testing, grains tend to rotate such that the {111}〈1\overset{̄}{1}0〉 slip directions are aligned with the loading axis. For plane strain and balanced biaxial strain states, the majority of grains are distributed with the {111} plane parallel to the sample normal direction. Accompanying visco-plastic self consistent (VPSC) predictions of the texture evolution were made along same strain paths and strain increments. Comparing between the measured texture evolution and computational texture evolution indicate that the VPSC model qualitatively predicts the measured texture evolution, but the rate at which the texture evolution occurs is over predicted.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Bleck W, Grossterlinden R, Lotter U, Reip CP: Textures in steel sheets. Steel Res 1991, 62(12):580–586. ISSN 0177–4832 ISSN 0177-483210.1002/srin.199100453 ↗
2. Bodin A, Sietsma J, van der Zwaag S: Texture and microstructure development during intercritical rolling of low-carbon steels. Metallurg Mater Trans A 2002, 33(6):1589–1603. ISSN 1073–5623 ISSN 1073-5623 10.1007/s11661-002-0169-310.1007/s11661-002-0169-3 ↗
3. Hutchinson B: Deformation microstructures and textures in steels. Philos Trans R Soc Lond A 1999, 357(1756):1471–1485. ISSN 1364–503X ISSN 1364-503X 10.1098/rsta.1999.038510.1098/rsta.1999.0385 ↗
4. Kestens L, Jonas JJ: Deep drawing textures in low carbon steels. Metals And Mater-Korea 1999, 5(5):419–427. ISSN 1225–9438 ISSN 1225-9438 10.1007/BF0302615410.1007/BF03026154 ↗
5. Wronski S, Wrobel M, Baczmanski A, Wierzbanowski K: Effects of cross-rolling on residual stress, texture and plastic anisotropy in f.c.c. and b.c.c. metals. Mater Characterization 2013, 77: 116–126. ISSN 1044–5803 ISSN 1044-580310.1016/j.matchar.2013.01.005 ↗
6. Yerra SK, Vankudre HV, Date PP, Samajdar I: Effect of strain path and the magnitude of prestrain on the formability of a low carbon steel: On the textural and microtextural developments. J Eng Mater Technol-Trans ASME 2004, 126(1):53–61. ISSN 0094–4289 ISSN 0094-4289 10.1115/1.163143510.1115/1.1631435 ↗
7. Creuziger A, Hu L, Gnäupel-Herold T, Rollett AD: Data citation: crystallographic texture evolution in 1008 steel sheet during multi-axial tensile strain paths. 2013.http://hdl.handle.net/11115/231
8. Oberg E, Jones FD, Horton HL, Ryffel HH: Machinery’s handbook, 25th edition. Industrial Press Inc., 32 Haviland Street, Unit 2C South Norwalk, CT 06854. 1996.
9. MatWeb. AISI 1008 steel, CQ, DQ, and DQSK sheet 2013.http://www.matweb.com/search/datasheet.aspx?MatGUID=145867c159894de286d4803a0fc0fe0f
10. Ray RK, Jonas JJ: Transformation textures in steels. Int Mater Rev 1990, 35(1):1–36. ISSN 0950–6608 ISSN 0950-6608 10.1179/09506609079032404610.1179/095066090790324046 ↗
11. Kestens L, Jonas JJ: ASM handbook, volume 14A:685–700. ASM, ASM International Materials Park, OH 2006, 44073–0002.
12. Inagaki H: Fundamental aspect of texture formation in low-carbon steel. ISIJ Int 1994, 34: 313–321. 10.2355/isijinternational.34.31310.2355/isijinternational.34.313 ↗
13. Hutchinson B: Practical aspects of texture control in low carbon steels. Mater Sci Forum 1994, 157–162: 1917–1928.10.4028/www.scientific.net/MSF.157-162.1917 ↗
14. Inagaki H, Kurihara K, Kozasu I: Influence of crystallographic texture on strength and toughness of control-rolled high-tensile strength steel. Trans Iron And Steel Institute of Japan 1977, 17(2):75–81. ISSN 0021–1583 ISSN 0021-158310.2355/isijinternational1966.17.75 ↗
15. Luzin V, Banovic S, Gnaupel-Herold T, Prask HJ, Ricker RE: Measurement and calculation of elastic properties in low carbon steel sheet. In ICOTOM 14: Textures Of Materials, volume 495–497 of Materials Science Forum Edited by: Houtte PV, Kestens L. 2005, 1591–1596.
16. Mirshams RA, Crosby KE, Mohamadian HP, Burris CL: The influence of biaxial stretching on the texture of ultra-low carbon (ulc) steel sheets. Scripta Metallurgica Et Materialia 1993, 29(4):433–438. ISSN 0956–716X ISSN 0956-716X 10.1016/0956-716X(93)90143-G10.1016/0956-716X(93)90143-G ↗
17. Baczynski J, Jonas JJ: Texture development during the torsion testing of alpha-iron and two IF steels. Acta Mater 1996, 44(11):4273–4288. ISSN 1359–6454 ISSN 1359-6454 10.1016/1359-6454(96)00114-010.1016/1359-6454(96)00114-0 ↗
18. Kang JY, Bacroix B, Regle H, Oh KH, Lee HC: Effect of deformation mode and grain orientation on misorientation development in a body-centered cubic steel. Acta Mater 55 2007, 15: 4935–4946. ISSN 1359–6454 ISSN 1359-645410.1016/j.actamat.2007.05.014 ↗
19. Savoie J, Jonas JJ: Simulation of the deformation textures induced by deep-drawing in extra low-carbon steel sheets. Acta Metallurgica Et Materialia 1994, 42(12):4101–4116. ISSN 0956–7151 ISSN 0956-7151 10.1016/0956-7151(94)90188-010.1016/0956-7151(94)90188-0 ↗
20. Toth LS, Jonas JJ, Daniel D, Ray RK: Development of ferrite rolling textures in low-carbon and extra low-carbon steels. Metallurgical Trans A 1990, 21(11):2985–3000. ISSN 0360–2133 ISSN 0360-2133 10.1007/BF0264721910.1007/BF02647219 ↗
21. Raabe D: Simulation of rolling textures of b.c.c. matals considering grain interactions and crystalline slip on {100}, {112} and {123} planes. Mater Sci Eng A 1995, 197: 31–37. 10.1016/0921-5093(94)09770-410.1016/0921-5093(94)09770-4 ↗
22. ASTM International: Standard test method for atomic emission vacuum spectrometric analysis of carbon and low-alloy steel. ASTM Standards E 415 2008a.
23. ASTM International: Standard test methods for determination of carbon, sulfur, nitrogen, and oxygen in steel, iron, nickel, and cobalt alloys by various combustion and fusion techniques. ASTM Standards E 1019 2011.
24. ASTM International: Standard test methods for determining average grain size E 112. ASTM Standards E 112 2004.
25. ASTM International: Standard test methods for tension testing of metallic materials E8/E8M. ASTM Standards E 8 2008b.
26. Foecke T, Iadicola MA, Lin A, Banovic SW: A method for direct measurement of multiaxial stress-strain curves in sheet metal. Metallurgical and Materials Transactions A 2007, 38A: 306–313.10.1007/s11661-006-9044-y ↗
27. Raghavan KS: A simple technique to generate in-plane forming limit curves and selected applications. Metallurgical and Mater Trans A 1995, 26A: 2075–2084.10.1007/BF02670679 ↗
28. Brand PC, Prask HJ, Gneaupel-Herold T: Residual stress measurements at the NIST reactor. Physica B 1997, 241–243: 1244–1245.10.1016/S0921-4526(97)00837-5 ↗
29. Matthies S, Wenk HR: Optimization of texture measurements by pole figure coverage with hexagonal grids. Physica Status Solidi (a) 1992, 133: 253–257. 10.1002/pssa.221133020610.1002/pssa.2211330206 ↗
30. Gnaeupel-Herold T: Bt8 data analysis. 2012.http://www.ncnr.nist.gov/instruments/bt8/BT8DataAnalysis.htm
31. Kallend UF, John S, Rollett AD, Wenk HR, Kocks: popLA - an integrated software system for texture analysis. Textures and Microstructures 1991, 14: 1203–1208.10.1155/TSM.14-18.1203 ↗
32. Matthies S, Vinel GW: On the reproduction of the orientation distribution function of texturized samples from reduced pole figures using the conception of a conditional ghost correction. Physica Status Solidi B 1982, 112(2):K111-K114. ISSN 0370–1972 ISSN 0370–1972 10.1002/pssb.222112025410.1002/pssb.2221120254 ↗
33. Hielscher R, Schaeben H: A novel pole figure inversion method: specification of the MTEX algorithm. J Appl Crystallography 2008, 41: 1024–103. 10.1107/S002188980803011210.1107/S0021889808030112 ↗
34. Creuziger A, Syed K, Gnaeupel-Herold T: Measurement of uncertainty in orientation distribution function (odf) calculations. Scripta Mat 2014, 72–73: 55–58.10.1016/j.scriptamat.2013.10.017 ↗
35. Bunge HJ, Haessner F: 3-dimensional orientation distribution function of crystals in cold-rolled copper. J Appl Phys 1968, 39(12):5503–5515. 10.1063/1.165600310.1063/1.1656003 ↗
36. Lebensohn RA, Tomé CN: A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys. Acta Metallurgica et Materialia 1993, 41: 2611–2624. 10.1016/0956-7151(93)90130-K10.1016/0956-7151(93)90130-K ↗
37. Hu L, Rollett AD, Iadicola M, Foecke T, Banovic S: Constitutive relations for AA 5754 based on crystal plasticity. Metallurgical and Mater Trans 2012, A 43A: 854–869.10.1007/s11661-011-0927-1 ↗
38. Dawson PR, MacEwen SR, Wu PD: Advances in sheet metal forming analyses: dealing with mechanical anisotropy from crystallographic texture. Int Mater Rev 2003, 48: 86–122. 10.1179/09506600322500241510.1179/095066003225002415 ↗
39. Pokharel R, Lind J, Kanjarala AK, Lebensohn RA, Li SF, Kenesei P, Suter RM, Rollett AD: Polycrystal plasticity: comparison between grain scale observations of deformation and simulations. submitted to Annual Reviews Condensed Matter Physics 2013.
40. Li SF, Lind J, Hefferan CM, Pokharel R, Lienert U, Rollett AD, Suter RM: Three-dimensional plastic response in polycrystalline copper via near-field high-energy X-ray diffraction microscopy. J Appl Crystallography 2012, 45: 1098–1108. 10.1107/S002188981203951910.1107/S0021889812039519 ↗