A Comparative Analysis of the Dynamic Strength Properties of the Long Guides of Intelligent Machines for a New Method of the Thermal Spraying of Polymer Concrete
Source abstract
Abstract
The possibility of using polymer concrete for metal cutting machine beds is analyzed. A comparison of the structures of the machine beds made of polymer concrete and cast iron is made. The frequency of the body of the machine beds made of polymer concrete and cast iron is determined. An analysis of the stress–strain state under static loads is carried out. To increase resistance to wear, it is proposed to spray polymer concrete frames are proposed by the gas–thermal method. The installation of thermal spraying for guide machine beds is given. The optimal parameters for spraying the guides of the machine beds made of polymer concrete are established calculated using the finite element method for the guide beds of metal cutting machine tools using polymer concrete with gaseous coating. The manufacture of the foundation bed from polymer concrete increases the vibration resistance of the machine by 1.4 times. At the same time, the metal consumption of metal cutting machines will decrease by 60%. To increase the wear resistance of the frame guides, it is proposed to use thermal spraying with certain modes typical for polymer concrete. The installation of thermal spraying for bed guides is given. Calculating using the finite element method for the guide beds of metal cutting machines showed that the use of polymer concrete with a wear-resistant coating is justified.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Tunneling and Rock Mechanics · Industrial Engineering and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Technological Equipment, Mechanical Engineering and Standardization, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
Institute of Machine Design, Faculty of Mechanical Engineering, Poznan University of Technology, 60-965 Poznan, Poland
Funding
Science Committee of the Ministry of Education · Science of the Republic of Kazakhstan IRN project
References (24)
Show source-provided references
1. Wu, S., Dong, Z., Qi, F., and Fan, Z. (2022). Prediction of the Comprehensive Error Field in the Machining Space of the Five-Axis Machine Tool Based on the “S”-Shaped Specimen Family. Machines, 10.10.3390/machines10050408 ↗
2. Romanowicz, P.J., Smolarski, D., and Kozień, M.S. (2022). Using the Effect of Compression Stress in Fatigue Analysis of the Roller Bearing for Bimodal Stress Histories. Materials, 15.10.3390/ma15010196 ↗
3. Machine Tools: A Case Study In Advanced Manufacturing Industrial Economics
4. Materials in machine tool structures10.1016/j.cirp.2015.05.005 ↗
5. Mechanical Properties of Polymer Concrete10.1155/2013/948745 ↗
6. Kakusha, V., Kornev, O., Kovalev, M., and Litvinov, E. (2018, January 6–7). GFRP reinforced foundation slab design for 15 storey residential building. Proceedings of the 2nd International Workshop on Durability and Sustainability of Concrete Structures, Moscow, Russia.
7. On the damping capacity of cast irons10.1134/S0031918X12070058 ↗
8. The study features of the behavior of the polymer concrete
9. Light heat-resistant polymer concretes based on oligooxyhydridesilmethylensiloxysilane and hollow spherical fillers
10. Performance of polymer modified bitumen for flexible pavements
11. Machine Tools Foundation Static and Free vibration analyses
12. Reviewing some properties of polymer concrete
13. Defect Formation of Gray Iron Casting
14. Effect of Section Thickness On The Microstructure And Hardness Of Gray Cast Iron (A Simulation Study)
15. Castillo Comparison between the dynamical properties of polymer concrete and grey cast iron10.1016/j.matdes.2006.03.012 ↗
16. Finite element-based machine learning approach for optimization of process parameters to produce silicon carbide ceramic complex parts10.1016/j.ceramint.2022.03.004 ↗
17. Finite Element Analysis as a response to frequently asked questions of machine tool mechanical design-engineers10.1051/matecconf/201710401001 ↗
18. Eighty Years of the Finite Element Method: Birth, Evolution, and Future10.1007/s11831-022-09740-9 ↗
19. Hybrid 3D-plane finite element modeling for elastodynamics10.1016/j.finel.2022.103812 ↗
20. (2022, October 10). Properties of Commonly Used Polymers. Available online: https://www.notesandsketches.co.uk/Polymer_properties.html.
21. Modelling optimization involving different types of elements in finite element analysis10.1088/1757-899X/50/1/012036 ↗
22. Efficient implementation of finite element methods on non-matching andoverlapping meshes in 3D10.1137/11085949X ↗
23. Building mathematical model for gas-thermal process of coating evaporation
24. Škamat, J., Černašėjus, O., Zhetessova, G., Nikonova, T., Zharkevich, O., and Višniakov, N. (2021). Effect of laser processing parameters on microstructure, hardness and tribology of NiCrCoFeCBSi/WC coatings. Materials, 14.10.3390/ma14206034 ↗