journal article·2020-12-05Open access

An Integrated Approach to Real-Time Acoustic Emission Damage Source Localization in Piled Raft Foundations

Yong-Min Kim, Gyeol Han, Hyunwoo Kim, Tae-Min Oh, Jin-Seop Kim, Tae-Hyuk Kwon

Applied Sciences· Volume 10· Issue 23

Abstract

Acoustic emission (AE) has garnered significant interest as a promising way to detect the early-stage development of internal cracks and damage in underground and geotechnical structures, associated with natural disasters. Meanwhile, AE source localization techniques that can identify the damage location in a piled-raft foundation (PRF) are premature because of its complex geometry, although the PRF is a widely used deep foundation type for high-rise buildings. In this study, we propose an integrated approach to localize AE sources in the PRF by using the modified Akaike information criterion (AIC) method and examine its accuracy to mark with pile zones. We performed a series of experiments on a scaled PRF model at a ratio of 1:50, composed of one raft and 25 piles. The results demonstrate that the combined approach with the modified AIC method and the Simplex method can localize the AE source zones with good accuracy, greater than 95% on average. The suggested two-stage AIC picker shows accurate onset time determination, and hence, it significantly improves the accuracy, particularly effective for the signals with low signal-to-noise ratios. The approach exploiting the two-stage AIC picker can be readily used for automated real-time AE monitoring to detect crack generation and its location in buried foundations that cannot be inspected visually.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Seismic Waves and Analysis · Geophysical Methods and Applications · Seismology and Earthquake Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Korea

Deep Subsurface Research Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), Daejeon 34132, Korea

Department of Civil and Environmental Engineering, Pusan National University (PNU), Busan 46241, Korea

Radioactive Waste Disposal Research Division, Korea Atomic Energy Research Institute (KAERI), Daejeon 34057, Korea

Funding

the Nuclear Research and Development Program of the National Research Foundation of Korea funded by the Minister of Science and ICT · the National Research Council of Science & Technology (NST) grant by the Korea government (MSIP)

References (36)

Show source-provided references
1. The role of acoustic emission in the study of rock fracture10.1016/0148-9062(93)90041-B ↗
2. Acoustic emission monitoring of bridges: Review and case studies10.1016/j.engstruct.2010.02.020 ↗
3. ASTM E1316 (2006). Standard Terminology for Nondestructive Examinations, ASTM International.
4. Quantitative evaluation of fracture processes in concrete using signal-based acoustic emission techniques10.1016/j.cemconcomp.2006.02.006 ↗
5. Locating acoustic emission sources in complex structures using Gaussian processes10.1016/j.ymssp.2009.05.018 ↗
6. Damage location in steel bridges by acoustic emission10.1177/10453890122145311 ↗
7. Identification of acoustic emission wave modes for accurate source location in plate-like structures10.1002/stc.413 ↗
8. Oh, T.M., Kim, M.K., Lee, J.W., Kim, H., and Kim, M.J. (2020). Experimental Investigation on Effective Distances of Acoustic Emission in Concrete Structures. Appl. Sci., 10.10.3390/app10176051 ↗
9. Acoustic emission monitoring for assessment of prestressed concrete beams10.1016/j.conbuildmat.2014.01.100 ↗
10. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
11. Efficient mine microseismic monitoring10.1016/j.coal.2005.03.004 ↗
12. Localization of acoustic emission sources in structural health monitoring of masonry bridge10.1002/stc.1675 ↗
13. Safety management based on detection of possible rock bursts by AE monitoring during tunnel excavation10.1007/s00603-006-0122-7 ↗
14. Reliable onset time determination and source location of acoustic emissions in concrete structures10.1016/j.cemconcomp.2011.11.013 ↗
15. Improved acoustic emission source location during fatigue and impact events in metallic and composite structures10.1177/1475921716672206 ↗
16. Acoustic emission for monitoring a reinforced concrete beam subject to four-point-bending10.1016/j.conbuildmat.2006.04.003 ↗
17. An automatic phase picker for local and teleseismic events10.1785/BSSA0770041437 ↗
18. Inference about the change-point from cumulative sum tests10.1093/biomet/58.3.509 ↗
19. A method for reading and checking phase times in auto-processing system of seismic wave data10.4294/zisin1948.38.3_365 ↗
20. Toward improved damage location using acoustic emission10.1177/0954406212449582 ↗
21. Automatic P-wave arrival detection and picking with multiscale wavelet analysis for single-component recordings10.1785/0120020241 ↗
22. Effect on mechanical performance of UHMWPE/HDPE-blend reinforced with kenaf, basalt and hybrid kenaf/basalt fiber10.1080/03602559.2013.798814 ↗
23. Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials10.1016/j.renene.2014.01.036 ↗
24. Modeling the effects of backfilling and soil compaction beside shallow buried pipes10.1061/(ASCE)PS.1949-1204.0000136 ↗
25. ASTM E976 (2005). Guide for Determining the Reproducibility of Acoustic Emission Sensor Response, ASTM International.
26. Characterization and calibration of acoustic emission sensors
27. Investigation of pencil-lead breaks as acoustic emission sources
28. Damage-induced acoustic emission source identification in an advanced sandwich composite structure10.1016/j.compstruct.2018.04.051 ↗
29. Damage-induced acoustic emission source monitoring in a honeycomb sandwich composite structure10.1016/j.compositesb.2018.09.071 ↗
30. Strategies for reliable automatic onset time picking of acoustic emissions and of ultrasound signals in concrete10.1016/j.ultras.2004.12.005 ↗
31. Mhamdi, L. (2015). Seismology-Based Approaches for the Quantitative Acoustic Emission Monitoring of Concrete Structures. [Ph.D. Thesis, University of Delaware].
32. New automatic localization technique of acoustic emission signals in thin metal plates10.1016/j.ultras.2008.09.005 ↗
33. Acoustic emission localization in thin multi-layer plates using first-arrival determination10.1016/j.ymssp.2012.11.008 ↗
34. Microearthquake location: A nonlinear approach that makes use of a simplex stepping procedure10.1785/BSSA0780020799 ↗
35. Analysis of source location algorithms: Part II. Iterative methods
36. Ziehl, P., and ElBatanouny, M. (2016). Acoustic emission monitoring for corrosion damage detection and classification. Corrosion of Steel in Concrete Structures, Woodhead Publishing.10.1016/B978-1-78242-381-2.00010-9 ↗