The Prediction of Abrasion Resistance of Mortars Modified with Granite Powder and Fly Ash Using Artificial Neural Networks
Source abstract
Abstract
This paper predicts the abrasion resistance of a cementitious composite containing granite powder and fly ash replacing up to 30% of the cement weight. For this purpose, intelligent artificial neural network (ANN) models were used and compared. A database was built based on mix composition, curing time, and curing method. The model developed to predict the abrasion resistance of the cementitious composites containing granite powder and fly ash was shown to be accurate. It was proved by the very high values of the accuracy parameters that were above 0.93 in the case of the coefficient of the determination R2 and very low values of the errors, which were about 10% in the case of mean average percentage error. This method can be used especially for designing cement mortars with granite powder and fly ash additives replacing cement in a range from 0 to 30% of its weight. These mortars can be used for floors in industrial buildings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering and Construction Processes, Wroclaw University of Science and Technology, 50-370 Wrocław, Poland
Funding
National Centre for Research and Development
References (37)
Show source-provided references
1. Towards sustainable concrete10.1038/nmat4930 ↗
2. Can Portland cement be replaced by low-carbon alternative materials? A study on the thermal properties and carbon emissions of innovative cements10.1016/j.jclepro.2018.02.138 ↗
3. Cement and carbon emissions10.1617/s11527-013-0114-5 ↗
4. Halstead, W.J. (1986). NCHRP Synthesis of Highway Practice, Transportation Research Board.
5. Green concrete composite incorporating fly ash with high strength and fracture toughness10.1016/j.jclepro.2017.10.065 ↗
6. Fly ash and slag10.1016/j.cemconres.2019.105826 ↗
7. A review on Properties of Sustainable Concrete using granite dust as replacement for river sand10.1016/j.jclepro.2016.03.114 ↗
8. Gerasimova, E., Kapustin, F., Rogante, M., and Kochnev, D. (2017, January 5–8). Granite Dust is the Possible Component of the Dry Construction Mixtures. Proceedings of the International Conference with Elements of School for Young Scientists on Recycling and Utilization of Technogenic Formations, Ekaterinburg, Russia.
9. Recycled aggregate concrete produced with red granite dust as a partial cement replacement10.1016/j.conbuildmat.2011.04.047 ↗
10. Abrasion resistance of industrial concrete floors
11. Abrasion resistance of concrete–Design, construction and case study
12. Effect of source of fly ash on abrasion resistance of concrete10.1061/(ASCE)0899-1561(2002)14:5(417) ↗
13. Abrasion Resistance Estimation of High Strength Concrete
14. Effects of mixture proportioning, curing, and finishing on concrete surface hardness
15. (2015). Methods of Test for Screed Materials—Part 3: Determination of Wear Resistance—Böhme (Standard No. EN 13892-3:2015-02).
16. Filler technology of adding granite dust to reduce cement content and increase strength of mortar10.1016/j.powtec.2018.09.084 ↗
17. High volume fly ash abrasion resistant concrete10.1061/(ASCE)0899-1561(2002)14:3(274) ↗
18. Abrasion resistance of concrete as influenced by inclusion of fly ash10.1016/0008-8846(94)90056-6 ↗
19. Abrasion resistance and sorptivity characteristics of SCC containing granite waste10.1016/j.matpr.2019.11.318 ↗
20. Durability of concrete made with granite and marble as recycle aggregates10.1016/j.jmatprotec.2007.12.120 ↗
21. Granite powder concrete10.17485/ijst/2010/v3i3.6 ↗
22. An intelligent model for the prediction of the compressive strength of cementitious composites with ground granulated blast furnace slag based on ultrasonic pulse velocity measurements10.1016/j.measurement.2020.108951 ↗
23. Application of soft computing methods for predicting the elastic modulus of recycled aggregate concrete10.1016/j.jclepro.2017.11.186 ↗
24. An intelligent model for the prediction of the depth of the wear of cementitious composite modified with high-calcium fly ash10.1016/j.compstruct.2020.113234 ↗
25. Investigation of mechanical properties of mortar with mixed recycled aggregates10.1007/s42107-018-0044-1 ↗
26. Abrasion resistance behaviour of fly ash based geopolymer using nanoindentation and artificial neural network10.1016/j.conbuildmat.2019.04.021 ↗
27. (2019). Testing Fresh Concrete—Part 6: Density (Standard No. PN-EN 12350-6:2019-08).
28. Işık, E., Ademović, N., Harirchian, E., Avcil, F., Büyüksaraç, A., Hadzima-Nyarko, M., Akif Bülbül, M., Işık, M.F., and Antep, B. (2023). Determination of Natural Fundamental Period of Minarets by Using Artificial Neural Network and Assess the Impact of Different Materials on Their Seismic Vulnerability. Appl. Sci., 13.10.3390/app13020809 ↗
29. Yari, M., Armaghani, D.J., Maraveas, C., Ejlali, A.N., Mohamad, E.T., and Asteris, P.G. (2023). Several Tree-Based Solutions for Predicting Flyrock Distance Due to Mine Blasting. Appl. Sci., 13.10.3390/app13031345 ↗
30. Modelling the abrasion resistance of self-consolidating concrete10.1680/macr.14.00157 ↗
31. Waqas, R.M., Butt, F., Zhu, X., Jiang, T., and Tufail, R.F. (2021). A Comprehensive Study on the Factors Affecting the Workability and Mechanical Properties of Ambient Cured Fly Ash and Slag Based Geopolymer Concrete. Appl. Sci., 11.10.3390/app11188722 ↗
32. Gayarre, F.L., Suárez González, J., Lopez Boadella, I., López-Colina Pérez, C., and Serrano López, M. (2021). Use of Waste from Granite Gang Saws to Manufacture Ultra-High Performance Concrete Reinforced with Steel Fibers. Appl. Sci., 11.10.3390/app11041764 ↗
33. Recycling of granite powder and waste marble produced from stone processing for the preparation of architectural glass–ceramic10.1016/j.conbuildmat.2022.128408 ↗
34. Effects of silica fume on the abrasion resistance of low-heat Portland cement concrete10.1016/j.conbuildmat.2022.127165 ↗
35. Milling tool wear prediction using multi-sensor feature fusion based on stacked sparse autoencoders10.1016/j.measurement.2022.110719 ↗
36. Hu, S., Liu, H., Feng, Y., Cui, C., Ma, Y., Zhang, G., and Huang, X. (2023). Tool Wear Prediction in Glass Fiber Reinforced Polymer Small-Hole Drilling Based on an Improved Circle Chaotic Mapping Grey Wolf Algorithm for BP Neural Network. Appl. Sci., 13.10.3390/app13052811 ↗
37. Evaluation of interlayer bonding in layered composites based on non-destructive measurements and machine learning: Comparative analysis of selected learning algorithms10.1016/j.autcon.2021.103977 ↗