journal article·2021-09-16Open access

The Human Performance Impact on OEE in the Adoption of New Production Technologies

Sebastiano Di Luozzo, Georgiana Ramona Pop, Massimiliano Maria Schiraldi

Applied Sciences· Volume 11· Issue 18

Abstract

The initial adoption phase of new production technologies is the period between the first production run or technology reconfiguration and the achievement of a stable target output. This time frame is generally characterized by productivity unsteadiness, quality performance variability, and unexpected machine failures together with increasing production volumes due to the process setup and instability, which inevitably affects production output. In this context, human performance represents an additional source of variability and process instability that is dependent on the workers’ productivity, learning curve and related training activities. Hence, to effectively assess the ramp-up phase of new production technologies, an appropriate evaluation of human performance is required. This paper proposes a comprehensive framework and criteria to perform a consistent assessment of the initial adoption phase of new production technologies by introducing two OEE measurement methodologies that distinguish between human performance, process configuration and technical features of the production technology. The proposed framework is then applied to and validated by a case study concerning the introduction of a semi-automatic packaging machine in a primary multinational company in the logistics industry. This case study shows the difference between the two OEE measures, along with the values interpretation and useful insights for achieving a stable production output.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Digital Transformation in Industry · Flexible and Reconfigurable Manufacturing Systems · Quality and Supply Management

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Enterprise Engineering, “Tor Vergata” University of Rome, Via del Politecnico 1, 00133 Roma, Italy

References (48)

Show source-provided references
1. Learning and process improvement during production ramp-up10.1016/S0925-5273(00)00045-1 ↗
2. A Decision Support System for rapid ramp-up of industry 4.0 enabled production systems10.1016/j.compind.2020.103190 ↗
3. Kim, T., Glock, C.H., and Emde, S. (2020). Production planning for a ramp-up process in a multi-stage production system with worker learning and growth in demand. Int. J. Prod. Res.10.1080/00207543.2020.1798034 ↗
4. Solution principles for managing instabilities in ramp-up10.1016/j.procir.2014.03.154 ↗
5. Production planning for a ramp-up process with learning in production and growth in demand10.1080/00207543.2011.616549 ↗
6. Production quality improvement during manufacturing systems ramp-up10.1016/j.cirpj.2018.07.001 ↗
7. Modelling ramp-up curves to reflect learning: Improving capacity planning in secondary pharmaceutical production10.1080/00207543.2014.998788 ↗
8. The expected contribution of Industry 4.0 technologies for industrial performance10.1016/j.ijpe.2018.08.019 ↗
9. Jeske, T., Weber, M.A., Würfels, M., Lennings, F., and Stowasser, S. (2018, January 22–26). Opportunities of digitalization for productivity management. Proceedings of the International Conference on Applied Human Factors and Ergonomics, Orlando, FL, USA.10.1007/978-3-319-94334-3_32 ↗
10. Jeske, T., Würfels, M., Lennings, F., Weber, M.A., and Stowasser, S. (2020, January 16–20). Achievements and Opportunities of Digitalization in Productivity Management. Proceedings of the International Conference on Applied Human Factors and Ergonomics, San Diego, CA, USA.10.1007/978-3-030-51369-6_3 ↗
11. Cimini, C., Lagorio, A., Romero, D., Cavalieri, S., and Stahre, J. (2020, January 12–17). Smart Logistics and The Logistics Operator 4.0. Proceedings of the 21st IFAC World Congress, Berlin, Germany.10.1016/j.ifacol.2020.12.2818 ↗
12. The contribution of Industry 4.0 technologies to facility management10.1177/18479790211024131 ↗
13. D’Orazio, L., Messina, R., and Schiraldi, M.M. (2020). Industry 4.0 and World Class Manufacturing Integration: 100 Technologies for a WCM-I4.0 Matrix. Appl. Sci., 10.10.3390/app10144942 ↗
14. Industry 4.0 Operators: Core Knowledge and Skills10.25046/aj050421 ↗
15. Placing the operator at the centre of Industry 4.0 design: Modelling and assessing human activities within cyber-physical systems10.1016/j.cie.2018.01.025 ↗
16. Maintenance transformation through Industry 4.0 technologies: A systematic literature review10.1016/j.compind.2020.103335 ↗
17. Serious games and virtual simulator for automotive manufacturing education & training10.1016/j.procs.2015.12.247 ↗
18. On the future of ramp-up management10.1016/j.cirpj.2018.03.001 ↗
19. A new method of bottleneck analysis for manufacturing systems10.1016/j.mfglet.2019.01.003 ↗
20. Organizational learning: From experience to knowledge10.1287/orsc.1100.0621 ↗
21. Tacit knowledge transfer and spillover learning in ramp-ups10.1108/IJOPM-08-2018-0508 ↗
22. Technical product change teams: An organizational concept for increasing the efficiency and effectiveness of technical product changes during ramp-up phases
23. The evaluation of an elementary virtual training system for manual assembly10.1080/00207543.2017.1374572 ↗
24. Modelling production ramp-up of engineering products10.1177/09544054JEM2071 ↗
25. Factors affecting the cost of airplanes10.2514/8.155 ↗
26. Performance indicators for the assessment of industrial operators10.1016/B978-0-444-59520-1.50143-3 ↗
27. Human factors and ergonomics in manufacturing in the industry 4.0 context—A scoping review10.1016/j.techsoc.2021.101572 ↗
28. Current research and future perspectives on human factors and ergonomics in Industry 4.010.1016/j.cie.2019.106004 ↗
29. Industrie 4.0 in production ramp-up management10.1016/j.promfg.2018.10.085 ↗
30. Original equipment manufacturer (OEM)-supplier integration to prepare for production ramp-up10.1108/JMTM-05-2018-0156 ↗
31. Modeling of manufacturing technologies during ramp-up10.1016/j.procir.2016.05.098 ↗
32. Potentials of facotry standards in production ramp-ups10.1016/j.procir.2016.06.088 ↗
33. Complexity-oriented ramp-up of assembly systems10.1016/j.cirpj.2015.05.007 ↗
34. Stabilizing production ramp-up by modeling uncertainty for product design verification using Dempster–Shafer theory10.1016/j.cirpj.2017.09.008 ↗
35. An integrated OEE framework for structured productivity improvement in a semiconductor manufacturing facility10.1108/IJPPM-04-2019-0176 ↗
36. Nakajima, S. (1988). Introduction to TPM, Productivity Press.
37. Overall Equipment Effectiveness: Consistency of ISO standard with literature10.1016/j.cie.2020.106518 ↗
38. Pasic, F., Wohlers, B., Dziwok, S., Becker, M., and Heinrich, M. (2019, January 10–13). A KPI-based condition monitoring system for beer brewing process. Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Zaragoza, Spain.10.1109/ETFA.2019.8869184 ↗
39. Iannone, R., and Nenni, M. (2013). Managing OEE to Optimize Factory Performance. Operations Management, IntechOpen.10.5772/55322 ↗
40. Supply chain network design with efficiency, location, and inventory policy using a multiobjective evolutionary algorithm10.1111/itor.12287 ↗
41. Morales-García, A.S., Díaz-Reza, J.R., and García-Alcaraz, J.L. (2021). Effect of TPM and OEE on the Social Performance of Companies. New Perspectives on Enterprise Decision-Making Applying Artificial Intelligence Techniques, Springer.10.1007/978-3-030-71115-3_6 ↗
42. Cross-functional team working for overall equipment effectiveness10.1108/13552510310493684 ↗
43. Analysis of critical factors for automatic measurement of OEE10.1016/j.procir.2016.11.023 ↗
44. ISO (2014). ISO22400:1—Automation Systems and Integration—Key Performance Indicators (KPIs) for Manufacturing Operations Management—Part. 1: Overview, Concepts and Terminology, International Organization for Standardization (ISO).
45. ISO (2014). ISO22400:2—Automation Systems and Integration—Key Performance Indicators (KPIs) for Manufacturing Operations Management—Part. 2: Definitions and Descriptions, International Organization for Standardization (ISO).
46. KPIs at the interface between scheduling and control10.1016/j.ifacol.2016.07.258 ↗
47. The diffusion of international standards on managerial practices
48. Implementing and visualizing ISO22400 key performance indicators for monitoring discrete manufacturing systems