Dynamic Analysis Method for Fault Propagation Behaviour of Machining Centres
Source abstract
Abstract
Fault propagation behaviour analysis is the basis of fault diagnosis and health maintenance. Traditional fault propagation studies are mostly based on a priori knowledge of a causality model combined with rule-based reasoning, disregarding the limitations of experience and the dynamic characteristics of the system that cause deviations in the identification of critical fault sources. Thus, this paper proposes a dynamic analysis method for fault propagation behaviour of machining centres that combines fault propagation mechanisms with model structure characteristics. This paper uses the design structure matrix (DSM) to establish the fault propagation hierarchy structure model. Considering the correlation of fault time, the fault probability function of a component is obtained and the fault influence degree of nodes are calculated. By introducing the Copula and Coupling degree functions, the fault influence degree of the edges between the same level and different levels are calculated, respectively. This paper constructs a fault propagation intensity model by integrating the edge betweenness and uses it as an index to analyze real-time fault propagation behaviour. Finally, a certain type of machining centre is taken as an example for specific application. This study can provide as a reference for the fault maintenance and reliability growth of a machining centre.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Manufacturing Process and Optimization · Engineering Diagnostics and Reliability · Product Development and Customization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Reliability of CNC Equipment, Ministry of Education, Changchun 130022, China
School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130022, China
Funding
Department of Science and Technology of Jilin Province · Jilin University
References (49)
Show source-provided references
1. Li, X.F. (2018, January 3–4). Research on the status QUO and development trend of numerical control technology. Proceedings of the 2018 International Conference on Computational Science and Engineering (ICCSE 2018), Qingdao, China.
2. Prospects for CNC machine tools10.3103/S1068798X19120153 ↗
3. Reliability modelling of correlated competitions and dependent components with random failure propagation time10.1002/qre.2609 ↗
4. Dynamic interaction between precision machine tools and their foundations10.20965/ijat.2020.p0386 ↗
5. Recovery of coupled networks after cascading failures10.21629/JSEE.2018.03.22 ↗
6. Fault diagnosis strategy of CNC machine tools based on cascading failure10.1007/s10845-017-1382-7 ↗
7. Fault diagnosis for CNC machine tool based on mapping model10.4028/www.scientific.net/AMM.607.739 ↗
8. A survey of fault diagnosis and fault-tolerant techniques-part I: Fault diagnosis with model-based and signal-based approaches10.1109/TIE.2015.2417501 ↗
9. A survey of fault diagnosis and fault-tolerant techniques—part II: Fault diagnosis with knowledge-based and hybrid/active approaches10.1109/TIE.2015.2417501 ↗
10. Domain knowledge-based deep-broad learning framework for fault diagnosis10.1109/TIE.2020.2982085 ↗
11. Fault diagnosis and identification in the distribution network using the fuzzy expert system10.17531/ein.2018.4.13 ↗
12. Research on a configurable method for fault diagnosis knowledge of machine tools and its application10.1007/s00170-017-1268-z ↗
13. Structural abstraction for model-based diagnosis with a strong fault model10.1016/j.knosys.2018.07.039 ↗
14. Hidden markov model based principal component analysis for intelligent fault diagnosis of wind energy converter systems10.1016/j.renene.2020.01.010 ↗
15. A simulation model based fault diagnosis method for bearings10.3233/JIFS-169557 ↗
16. Worm gear condition monitoring and fault detection from thermal images via deep learning method10.17531/ein.2020.3.18 ↗
17. Liang, L., Wen, H.B., Liu, F., Li, G., and Li, M.L. (2019). Feature extraction of impulse faults for vibration signals based on sparse non-negative tensor factorization. Appl. Sci., 9.10.3390/app9183642 ↗
18. Analysis of statistical time-domain features effectiveness in identification of bearing faults from vibration signal10.1109/JSEN.2017.2727638 ↗
19. Combining model-based diagnosis and data-driven anomaly classifiers for fault isolation10.1016/j.conengprac.2018.08.013 ↗
20. Fusion of model-based and data-based fault diagnosis approaches10.1016/j.ifacol.2018.09.698 ↗
21. Engine valve clearance diagnostics based on vibration signals and machine learning methods10.17531/ein.2020.2.16 ↗
22. Gearbox faults feature selection and severity classification using machine learning10.17531/ein.2020.4.19 ↗
23. Wu, Z., Zhang, Q., Cheng, L.F., and Tan, S.Y. (2019). A new method of two-stage planetary gearbox fault detection based on multi-sensor information fusion. Appl. Sci., 9.10.3390/app9245443 ↗
24. Signal based condition monitoring techniques for fault detection and diagnosis of induction motors: A state-of-the-art review10.1016/j.ymssp.2020.106908 ↗
25. Failure diagnosis method of photovoltaic generator using support vector machine10.1007/s42835-020-00430-9 ↗
26. Support vector machines based non-contact fault diagnosis system for bearings10.1007/s10845-019-01511-x ↗
27. Piltan, F., Prosvirin, A.E., Sohaib, M., Saldivar, B., and Kim, J.M. (2020). An SVM-based neural adaptive variable structure observer for fault diagnosis and fault-tolerant control of a robot manipulator. Appl. Sci., 10.10.3390/app10041344 ↗
28. Fault diagnosis of rolling element bearing based on artificial neural network10.1007/s12206-019-0103-x ↗
29. Statistical neural networks for induction machine fault diagnosis and features processing based on principal component analysis10.1002/tee.23298 ↗
30. Wang, B., Ke, H.W., Ma, X.D., and Yu, B. (2019). Fault diagnosis method for engine control system based on probabilistic neural network and support vector machine. Appl. Sci., 9.10.3390/app9194122 ↗
31. Fault tree analysis: A survey of the state-of-the-art in modelling, analysis and tools10.1016/j.cosrev.2015.03.001 ↗
32. Research on fault early warning and the diagnosis of machine tools based on energy fault tree analysis10.1177/0954405418816848 ↗
33. A study of the effect of basic network characteristics on system-of-system failure propagation10.1016/j.procs.2014.09.004 ↗
34. Cascading failure in multilayer networks with dynamic dependency groups10.1088/1674-1056/27/9/098901 ↗
35. Diagnosis modelling for dependability assessment of fault-tolerant systems based on stochastic activity networks10.1002/qre.1652 ↗
36. Simultaneous localization of software faults based on complex network theory10.1109/ACCESS.2018.2829541 ↗
37. Design structure matrix extensions and innovations: A survey and new opportunities10.1109/TEM.2015.2491283 ↗
38. Using a design structure matrix to support technology roadmapping for product-service systems10.1080/09537325.2017.1310377 ↗
39. Dynamic importance analysis of components with known failure contribution of complex systems
40. Birnbaum importance measure for reliability systems with dependent components10.1109/TR.2019.2895400 ↗
41. Component reliability criticality or importance measures for systems with degrading components10.1109/TR.2011.2182256 ↗
42. Joint chance constrained shortest path problem with Copula theory10.1007/s10878-020-00562-8 ↗
43. Sklar’s theorem in an imprecise setting10.1016/j.fss.2014.10.007 ↗
44. A failure rate interaction model for two-component systems based on copula function
45. Artificial fish swarm algorithm: A survey of the state-of-the-art, hybridization, combinatorial and indicative applications10.1007/s10462-012-9342-2 ↗
46. International progress and evaluation on interactive coupling effects between urbanization and the eco-environment10.1007/s11442-016-1317-9 ↗
47. Weighted label propagation based on local edge betweenness10.1007/s11227-019-02978-4 ↗
48. Guo, L. (2015). Research on Failure Propagation Mechanism for Machine Integration System. [Master’s Thesis, Beijing Jiaotong University].
49. Evaluation for machine tool components importance based on improved leaderRank