journal article·2021-03-19Open access

Analysis and Design of a Leading Edge with Morphing Capabilities for the Wing of a Regional Aircraft—Gapless Chord- and Camber-Increase for High-Lift Performance

Conchin Contell Asins, Volker Landersheim, Dominik Laveuve, Seiji Adachi, Michael May, Jens-David Wacker, Julia Decker

Applied Sciences· Volume 11· Issue 6

Abstract

In order to contribute to achieving noise and emission reduction goals, Fraunhofer and Airbus deal with the development of a morphing leading edge (MLE) as a high lift device for aircraft. Within the European research program “Clean Sky 2”, a morphing leading edge with gapless chord- and camber-increase for high-lift performance was developed. The MLE is able to morph into two different aerofoils—one for cruise and one for take-off/landing, the latter increasing lift and stall angle over the former. The shape flexibility is realised by a carbon fibre reinforced plastic (CFRP) skin optimised for bending and a sliding contact at the bottom. The material is selected in terms of type, thickness, and lay-up including ply-wise fibre orientation based on numerical simulation and material tests. The MLE is driven by an internal electromechanical actuation system. Load introduction into the skin is realised by span-wise stringers, which require specific stiffness and thermal expansion properties for this task. To avoid the penetration of a bird into the front spar of the wing in case of bird strike, a bird strike protection structure is proposed and analysed. In this paper, the designed MLE including aerodynamic properties, composite skin structure, actuation system, and bird strike behaviour is described and analysed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aeroelasticity and Vibration Control · Aerodynamics and Fluid Dynamics Research · Vibration Control and Rheological Fluids

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fraunhofer LBF, 64289 Darmstadt, Germany

Fraunhofer IBP, Nobelstraße 12, 70569 Stuttgart, Germany

Fraunhofer EMI, Ernst-Zermelo-Straße 4, 79104 Freiburg, Germany

Funding

European Commission

References (44)

Show source-provided references
1. Karakalas, A.A., and Lagoudas, D.C. (2021). Preliminary Design and Preliminary Design and Numerical Investigation of SMA Torsion Tubes for the Actuation of Articulated Adaptive Panels. ARC.10.2514/6.2021-1318 ↗
2. Machairas, T., Solomou, A., and Saravanos, D. (2014, January 12–14). A morphing chevron actuated by shape memory alloy wires for noise reduction. Proceedings of the Greener Aviation: Clean Sky Breakthroughs and Worldwide Status, Brussels, Belgium.
3. ACARE Advisory Council for Aviation Research and Innovation in Europa (2021, January 20). FlightPath2050 Goals. Available online: https://www.acare4europe.org/sria/flightpath-2050-goals/protecting-environment-and-energy-supply-0.
4. Sinapius, M., Monner, H.P., Kintscher, M., and Riemenschneider, J. (2014). DLR’s Morphing Wing Activities within the European Network. Mechanics for the World, Procedia IUTAM 10 (2014), Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics, Beijing, China, 9–24 August 2012, Elsevier. ICTAM2012, S. 416–426.10.1016/j.piutam.2014.01.036 ↗
5. Morishima, R. (2011). Analysis of Composite Wing Structures with A Morphing Leading Edge. [Ph.D. Thesis, Cranfield University]. Available online: http://dspace.lib.cranfield.ac.uk/handle/1826/6797.
6. Monner, H.P., Kintscher, M., Lorkowski, T., and Storm, S. (2009, January 4–7). Design of a Smart Droop Nose as Leading Edge High-Lift System for Transportation Aircrafts. Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, USA. Article ID AIAA 2009-2128.10.2514/6.2009-2128 ↗
7. Colletti, C.R., and Ansell, P.J. (19–21, January 1–15). Design of an Airfoil Morphing Leading Edge for High-Lift Applications using a Genetic Algorithm. Proceedings of the AIAA SciTech 2021 Forum, Nashville, TN, USA.10.2514/6.2021-0947 ↗
8. Ameduri, S. (2018). Morphing of the Leading Edge. Morphing Wing Technologies, Butterworth-Heimann.10.1016/B978-0-08-100964-2.00016-2 ↗
9. Communier, D., Le Besnerais, F., Botez, R.M., and Wong, T. (2019). Design, Manufacturing and testing of a New Concept for a Morphing Leading Edge using a Subsonic Blow Down Wind Tunnel. Biomimetics, 4.10.3390/biomimetics4040076 ↗
10. Kintscher, M., Monner, H.P., and Heintze, O. (2010, January 19–24). Experimental Testing of a Smart Leading Edge High Lift Device For Commerical Transportation Aircrafts. Proceedings of the 27th International Congress on the Aeronautical Sciences, Nice, France.
11. Peel, L.D., Meija, J., Narvaez, B., Thompson, K., and Lingala, M. (2008, January 28–30). Development of a Simple Morphing Wing using Elastomeric Composite Skins and Actuators. Proceedings of the SMASIS08—ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Ellicott City, MD, USA.10.1115/SMASIS2008-544 ↗
12. Geier, S., Kintscher, M., Mahrholz, T., Wierach, P., Monner, H.-P., and Wiedemann, M. (2013). Characterization of multi-functoinal skin-material for morphing leading-edge applications. Active and Passive Smart Structures and Integrated Systems 2013, International Society for Optics and Photonics. Active and Passive Smart Structures and Integrated Systems.10.1117/12.2009865 ↗
13. Wölcken, P., and Papadopoulos, M. (2015). Manufacturing and testing of Smart Morphing SARISTU Trailing Edge. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Moscow, Russia, 19–21 May 2015, Springer International Publishing.10.1007/978-3-319-22413-8 ↗
14. Wölcken, P., and Papadopoulos, M. (2015). Design, Optimization, testing, verification, and Validation of the Wingtip Active Trailing Edge. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Moscow, Russia, 19–21 May 2015, Springer International Publishing.
15. Wölcken, P., and Papadopoulos, M. (2015). Winglet Design, Manufacturing, and Testing. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Moscow, Russia, 19–21 May 2015, Springer International Publishing.10.1007/978-3-319-22413-8 ↗
16. Wölcken, P., and Papadopoulos, M. (2015). Enhanced Adaptive Droops Nose—from Computer Model to Multi-functional Integrated Part. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Moscow, Russia, 19–21 May 2015, Springer International Publishing.
17. Wölcken, P., and Papadopoulos, M. (2015). Assessment of the SARISTU Enhanced Adaptive Droop Nose. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Moscow, Russia, 19–21 May 2015, Springer International Publishing.10.1007/978-3-319-22413-8 ↗
18. Wölcken, P., and Papadopoulos, M. (2015). A Shape Sensing for Morphing Structures Using Fiber Bragg Grating Technology. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Springer International Publishing.10.1007/978-3-319-22413-8 ↗
19. Ma, Z., and Chen, X. (2018). Fiber Bragg Grating Sensors for Aircraft Wing Measurement: Recent Applications and Technical Analysis. Sensors, 19.10.3390/s19010055 ↗
20. Święch, Ł. (2020). Calibration of a Load Measurement System for an Unmanned Aircraft Composite Wing Based on Fibre Bragg Gratings and Electrical Strain Gauges. Aerospace, 7.10.3390/aerospace7030027 ↗
21. Wölcken, P., and Papadopoulos, M. (2015). Load Monitoring by Means of Optical Fibres and Strain Gages. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Moscow, Russia, 19–21 May 2015, Springer International Publishing.
22. Experimental evaluation of a morphing leading edge concept10.1177/1045389X19862369 ↗
23. Vasista, S., Riemenschneider, J., Keimer, R., Monner, H.P., Nolte, F., and Horst, P. (2019). Morphing Wing Droop Nose with Large Deformation: Ground Tests and Lessons Learned. Aerospace, 6.10.3390/aerospace6100111 ↗
24. A SMA based Morphing Leading edge Architecture10.4028/www.scientific.net/AMR.1016.383 ↗
25. Contell Asins, C., Landersheim, V., and Schwarzhaupt, O. (2016, January 11–13). Development, manufacturing and testing of a 1:1 smart morphing leading edge demonstrator. Proceedings of the Greener Aviation 2016, Brussels, Belgium. paper ID 137.
26. Optimization of a variable-stiffness skin for morphing high-lift devices10.1088/0964-1726/19/12/124010 ↗
27. De Gaspari, A., Cavalieri, A., and Ricci, S. (2020). Advanced Design of a Full-Scale Active Morphing Droop Nose. Int. J. Aerosp. Eng.10.1155/2020/1086518 ↗
28. Design of a Morphing Leading Edge for Use as a High Lift Device for A Regional Aircraft10.1088/1757-899X/1024/1/012033 ↗
29. Two-equation eddy-viscosity turbulence models for engineering applications10.2514/3.12149 ↗
30. Puck, A. (1996). Festigkeitsanalyse von Faser-Matrix-Laminaten—Modelle für die Praxis, Carl Hanser Verlag.
31. A review on shape memory alloys with applications to morphing aircraft10.1088/0964-1726/23/6/063001 ↗
32. Henry, A.C., Molinari, G., Rivas-Padilla, J.R., and Arrieta, A.F. (2019). Smart Morphing Wing: Optimization of Distributed Piezoelectric Actuation. AIAA J., 56.10.2514/1.J057254 ↗
33. Mazzoleni, M., Maccarana, Y., Previdi, F., Pispola, G., Nardi, M., Perni, F., and Toro, S. (2017, January 3–7). Development of a reliable electro-mechanical actuator for primary control surfaces in small aircrafts. Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Munich, Germany.10.1109/AIM.2017.8014172 ↗
34. The More Electric Aircraft: Technology and challenges10.1109/MELE.2014.2360720 ↗
35. Marlett, K. (2021, March 16). Hexcel 8552 IM7 Unidirectional Prepreg 190 gsm & 35%RC Qualification Material Data Report. NCAMP Test Report Number: CAM RP-2009-015 Rev A, 22 April 2011. Available online: https://www.niar.wichita.edu/coe/ncamp_documents/Hexcel%208552/CAM-RP-2009-015%20Rev%20A%20April%2022%202011%20Hexcel%208552%20IM7%20Uni%20Data%20Report.pdf.
36. European Union Aviation Safety Agency (EASA) (2020). Certification Specification and Acceptable Means of Compliance for Large Aeroplanes CS-25, Amendment 25, European Union Aviation Safety Agency (EASA).
37. Failure behavior of composite T-joints with novel metallic arrow-pin reinforcements10.1016/j.compstruct.2013.11.022 ↗
38. Analysis of composite T-joint designs for enhanced resistance to hydrodynamic ram10.1016/j.compstruct.2015.02.012 ↗
39. May, M., Arnold-Keifer, S., Landersheim, V., Laveuve, D., Contell Asins, C., and Imbert, M. (2021). Bird Strike Resistance of a CFRP Morphing Leading Edge. Compos Part C.10.1016/j.jcomc.2021.100115 ↗
40. May, M., Haase, T., Leost, Y., Wegmann, M., and Blacha, M. (2019, January 7–11). Bird strike analyses of RACER fast rotorcraft. Proceedings of the AIAA 2019 SciTech Forum, San Diego, CA, USA.10.2514/6.2019-1270 ↗
41. May, M., Arnold-Keifer, S., and Haase, T. (2020). Damage resistance of composite structures with unsymmetrical stacking sequence subjected to high velocity bird impact. Compos. Part. C, 1.10.1016/j.jcomc.2020.100002 ↗
42. Wölcken, P., and Papadopoulos, M. (2015). Development and Validation of a Bird Strike Protection System for an Enhanced Adaptive Droop Nose. Smart Intelligent Aircraft Structures (SARISTU), Proceedings of the Final Project Conference, Springer International Publishing.
43. Magrini, A., Benini, E., Ponza, R., Wang, C., Khodaparast, H.H., Friswell, M.I., Landersheim, V., Laveuve, D., and Contell Asins, C. (2019). Comparison of Constrained Parameterisation Strategies for Aerodynamic Optimisation of Morphing Leading Edge Airfoil. Aerospace, 6.10.3390/aerospace6030031 ↗
44. Conceptual-level Evaluation of a Variable Stiffness Skin for a Morphing Wing Leading Edge