Multi-physics Approach to Predict Fatigue Behavior of High Strength Aluminum Alloy Repaired via Additive Friction Stir Deposition
Source abstract
Abstract
Abstract A smooth particle hydrodynamic (SPH) simulation of an additive friction stir deposition (AFSD) repair was used to inform a multi-physics approach to predict the fatigue life of a high strength aluminum alloy. The AFSD process is a solid-state layer-by-layer additive manufacturing approach in which a hollow tool containing feedstock is used to deposit material. While an understanding of the evolving microstructures is necessary to predict material performance, the elevated temperatures and strain rates associated with severe plastic deformation processes (SPDP) make accurate collection of experimental data within AFSD difficult. Without the ability to experimentally determine material history within the AFSD process, an SPH model was employed to predict the thermomechanical history. The SPH simulation of an AFSD repair was used to inform several microstructural models to predict material history during and after processing with AFSD and a post-processing heat treatment. These microstructure models are then used to inform a mechanistic microstructure and performance model to predict the fatigue life of an AFSD repair in AA7075.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Avery DZ et al (2018) Fatigue behavior of solid-state additive manufactured inconel 625. JOM 70(11):2475–2484. https://doi.org/10.1007/s11837-018-3114-710.1007/s11837-018-3114-7 ↗
2. Beck SC et al (2023) Examination of microstructure and mechanical properties of direct additive recycling for Al–Mg–Mn alloy machine chip waste. Mater Des 228:111733. https://doi.org/10.1016/j.matdes.2023.11173310.1016/j.matdes.2023.111733 ↗
3. Phillips BJ et al (2019) Microstructure-deformation relationship of additive friction stir-deposition Al–Mg–Si. Materialia 7:100387. https://doi.org/10.1016/j.mtla.2019.10038710.1016/j.mtla.2019.100387 ↗
4. Opprecht M, Garandet J-P, Roux G, Flament C, Soulier M (2020) A solution to the hot cracking problem for aluminium alloys manufactured by laser beam melting. Acta Mater 197:40–53. https://doi.org/10.1016/j.actamat.2020.07.01510.1016/j.actamat.2020.07.015 ↗
5. Yu H, Mishra R (2021) Additive friction stir deposition: a deformation processing route to metal additive manufacturing. Mater Res Lett 9:71–83. https://doi.org/10.1080/21663831.2020.184721110.1080/21663831.2020.1847211 ↗
6. Yu H, Xin Y, Wang M, Liu Q (2018) Hall-Petch relationship in Mg alloys: a review. J Mater Sci Technol 34(2):248–256. https://doi.org/10.1016/j.jmst.2017.07.02210.1016/j.jmst.2017.07.022 ↗
7. Lin Y-J, Lin C-S (2021) Galvanic corrosion behavior of friction stir welded AZ31B magnesium alloy and 6N01 aluminum alloy dissimilar joints. Corros Sci 180:109203. https://doi.org/10.1016/j.corsci.2020.10920310.1016/j.corsci.2020.109203 ↗
8. Lee J-H, Lee C-M, Kim D-H (2022) Repair of damaged parts using wire arc additive manufacturing in machine tools. J Mater Res Technol 16:13–24. https://doi.org/10.1016/j.jmrt.2021.11.15610.1016/j.jmrt.2021.11.156 ↗
9. Pyles R (2003) Aging aircraft: USAF workload and material consumption life cycle patterns. Santa Monica, Rand, CA
10. Kincaid KC, MacPhee DW, Stubblefield GG, Jordon JB, Rushing TW, Allison PG (2023) A finite volume framework for the simulation of additive friction stir deposition. J Eng Mater Technol 145:031002. https://doi.org/10.1115/1.405664210.1115/1.4056642 ↗
11. Stubblefield GG, Fraser K, Phillips BJ, Jordon JB, Allison PG (2021) A meshfree computational framework for the numerical simulation of the solid-state additive manufacturing process, additive friction stir-deposition (AFS-D). Mater Des 202:109514. https://doi.org/10.1016/j.matdes.2021.10951410.1016/j.matdes.2021.109514 ↗
12. Fraser K, St-Georges L, Kiss LI (2023) A mesh-free solid-mechanics approach for simulating the friction stir-welding process | IntechOpen. https://doi.org/10.5772/64159 Accessed 25 Jul 202310.5772/64159 ↗
13. Li L, Gupta V, Li X, Reynolds AP, Grant G, Soulami A (2022) Meshfree simulation and experimental validation of extreme thermomechanical conditions in friction stir extrusion. Comput Part Mech 9(4):789–809. https://doi.org/10.1007/s40571-021-00445-710.1007/s40571-021-00445-7 ↗
14. Profizi P, Combescure A, Ogawa K (2016) SPH modeling of adhesion in fast dynamics: application to the cold spray process. Comptes Rendus Mécanique 344(4):211–224. https://doi.org/10.1016/j.crme.2016.02.00110.1016/j.crme.2016.02.001 ↗
15. Holm EA, Battaile CC (2001) The computer simulation of microstructural evolution. JOM 53(9):20–23. https://doi.org/10.1007/s11837-001-0063-210.1007/s11837-001-0063-2 ↗
16. Wolfram S (1983) Statistical mechanics of cellular automata. Rev Mod Phys 55(3):601–644. https://doi.org/10.1103/RevModPhys.55.60110.1103/RevModPhys.55.601 ↗
17. Chen L-Q (2002) Phase-field models for microstructure evolution. Ann Rev Mater Res 32(1):113–140. https://doi.org/10.1146/annurev.matsci.32.112001.13204110.1146/annurev.matsci.32.112001.132041 ↗
18. Fan D, Chen L-Q (1997) Computer simulation of grain growth using a continuum field model. Acta Mater 45(2):611–622. https://doi.org/10.1016/S1359-6454(96)00200-510.1016/S1359-6454(96)00200-5 ↗
19. Chen L et al (2015) An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals. Comput Methods Appl Mech Eng 285:829–848. https://doi.org/10.1016/j.cma.2014.12.00710.1016/j.cma.2014.12.007 ↗
20. Documentation—Thermo-Calc manuals and help, Thermo-Calc Software. https://thermocalc.com/support/documentation/ Accessed 25 Jul 2023
21. Gorsse S, Chen Y-T, Hsu W-C, Murakami H, Yeh A-C (2021) Modeling the precipitation processes and the formation of hierarchical microstructures in a single crystal high entropy superalloy. Scr Mater 193:147–152. https://doi.org/10.1016/j.scriptamat.2020.11.00210.1016/j.scriptamat.2020.11.002 ↗
22. McDowell DL (1997) Multiaxial small fatigue crack growth in metals. Int J Fatigue 19(93):127–135. https://doi.org/10.1016/S0142-1123(97)00014-510.1016/S0142-1123(97)00014-5 ↗
23. Jordon JB, Gibson JB, Horstemeyer MF, Kadiri HE, Baird JC, Luo AA (2011) Effect of twinning, slip, and inclusions on the fatigue anisotropy of extrusion-textured AZ61 magnesium alloy. Mater Sci Eng A 528(22):6860–6871. https://doi.org/10.1016/j.msea.2011.05.04710.1016/j.msea.2011.05.047 ↗
24. Avery DZ et al (2020) Influence of grain refinement and microstructure on fatigue behavior for solid-state additively manufactured Al–Zn–Mg–Cu Alloy. Metall Mater Trans A 51(6):2778–2795. https://doi.org/10.1007/s11661-020-05746-910.1007/s11661-020-05746-9 ↗
25. Yang X, Liu M, Peng S (2014) Smoothed particle hydrodynamics modeling of viscous liquid drop without tensile instability. Comput Fluids 92:199–208. https://doi.org/10.1016/j.compfluid.2014.01.00210.1016/j.compfluid.2014.01.002 ↗
26. Fraser K (2017) Robust and efficient meshfree solid thermo-mechanics simulation of friction stir welding. https://doi.org/10.13140/RG.2.2.13318.6816910.13140/RG.2.2.13318.68169 ↗
27. Stubblefield GG et al (2022) Elucidating the influence of temperature and strain rate on the mechanics of AFS-D through a combined experimental and computational approach. J Mater Process Technol 305:117593. https://doi.org/10.1016/j.jmatprotec.2022.11759310.1016/j.jmatprotec.2022.117593 ↗
28. Takaki T, Hisakuni Y, Hirouchi T, Yamanaka A, Tomita Y (2009) Multi-phase-field simulations for dynamic recrystallization. Comput Mater Sci 45:881–88810.1016/j.commatsci.2008.12.009 ↗
29. Humphreys FJ, Hatherly M (2004) Chapter 13—hot deformation and dynamic restoration. In: Humphreys FJ, Hatherly M (eds) Recrystallization and related annealing phenomena, 2nd edn. Elsevier, Oxford, pp 415–V. https://doi.org/10.1016/B978-008044164-1/50017-710.1016/B978-008044164-1/50017-7 ↗
30. Kocks UF (1976) Laws for work-hardening and low-temperature creep. J Eng Mater Technol 98(1):76–85. https://doi.org/10.1115/1.344334010.1115/1.3443340 ↗
31. Bailey JE, Hirsch PB (1960) The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver. Philos Mag J Theor Exp Appl Phys 5(53):485–497. https://doi.org/10.1080/1478643600823830010.1080/14786436008238300 ↗
32. Miura H, Ozama M, Mogawa R, Sakai T (2003) Strain-rate effect on dynamic recrystallization at grain boundary in Cu alloy bicrystal. Scr Mater 48(10):1501–1505. https://doi.org/10.1016/S1359-6462(03)00053-810.1016/S1359-6462(03)00053-8 ↗
33. Roberts W, Ahlblom B (1978) A nucleation criterion for dynamic recrystallization during hot working. Acta Metall 26(5):801–813. https://doi.org/10.1016/0001-6160(78)90030-510.1016/0001-6160(78)90030-5 ↗
34. Zhang Y, Sills RB (2023) Strengthening via orowan looping of misfitting plate-like precipitates. J Mech Phys Solids 173:105234. https://doi.org/10.1016/j.jmps.2023.10523410.1016/j.jmps.2023.105234 ↗
35. Rokni MR, Widener CA, Champagne VK, Crawford GA (2015) Microstructure and mechanical properties of cold sprayed 7075 deposition during non-isothermal annealing. Surf Coat Technol 276:305–315. https://doi.org/10.1016/j.surfcoat.2015.07.01610.1016/j.surfcoat.2015.07.016 ↗
36. MacKenzie DS (2016) Metallurgy of heat treatable aluminum alloys. In: Heat treat nonferr alloys; ASM International, Materials Park, USA. https://doi.org/10.31399/asm.hb.v04e.a000628710.31399/asm.hb.v04e.a0006287 ↗
37. Kelly PM (1972) The effect of particle shape on dispersion hardening. Scr Metall 6(8):647–656. https://doi.org/10.1016/0036-9748(72)90120-210.1016/0036-9748(72)90120-2 ↗
38. Dixit M, Mishra RS, Sankaran KK (2008) Structure–property correlations in Al 7050 and Al 7055 high-strength aluminum alloys. Mater Sci Eng A 478(1):163–172. https://doi.org/10.1016/j.msea.2007.05.11610.1016/j.msea.2007.05.116 ↗
39. Embury JD, Lloyd DJ, Ramachandran TR (1989) 22—strengthening mechanisms in aluminum alloys. In: Vasudevan AK, Doherty RD (eds) Treatise on materials science and technology in aluminum alloys—contemporary research and applications, vol 31. Elsevier, London, pp 579–601
40. Shercliff HR, Ashby MF (1990) A process model for age hardening of aluminium alloys—I: the model. Acta Metall Mater 38(10):1789–1802. https://doi.org/10.1016/0956-7151(90)90291-N10.1016/0956-7151(90)90291-N ↗
41. Crystals | Free full-text | Stable stacking faults bounded by Frank Partial dislocations in Al7075 formed through precipitate and dislocation interactions. https://www.mdpi.com/2073-4352/7/12/375 Accessed 25 Jul 202310.3390/cryst7120375 ↗
42. Ardell AJ (1985) Precipitation hardening. Metall Trans A 16(12):2131–2165. https://doi.org/10.1007/BF0267041610.1007/BF02670416 ↗
43. Smallman RE (2016) Modern physical metallurgy. Elsevier
44. Ungär T, Lendvai J, Koväcs I, Groma G, Koväcs-Csetényi E (1976) Quantitative investigation of the reversion process of GP zones in an Al–Zn–Mg Alloy. Int J Mater Res 67(10):683–687. https://doi.org/10.1515/ijmr-1976-67100610.1515/ijmr-1976-671006 ↗
45. Dieter PGE (1988) Mechanical metallurgy. 3rd ed., Mc Graw-Hill Book Co., New York 1986. XXIII + 751 p., DM 138.50, ISBN 0–07–016893–8. Cryst Res Technol 23(2):194–194. https://doi.org/10.1002/crat.217023021110.1002/crat.2170230211 ↗
46. Avery DZ et al (2022) Evaluation of microstructure and mechanical properties of Al–Zn–Mg–Cu alloy repaired via additive friction stir deposition. J Eng Mater Technol 144:031003. https://doi.org/10.1115/1.405281610.1115/1.4052816 ↗
47. Wang L, Yang X, Robson JD, Sanders RE, Liu Q (2020) Microstructural evolution of cold-rolled AA7075 sheet during solution treatment. Materials 13(12):2734. https://doi.org/10.3390/ma1312273410.3390/ma13122734 ↗
48. Fan Y, Tang X, Wang S, Chen B (2021) Comparisons of age hardening and precipitation behavior in 7075 alloy under single and double-stage aging treatments. Met Mater Int 27(10):4204–4215. https://doi.org/10.1007/s12540-020-00875-710.1007/s12540-020-00875-7 ↗
49. Mehri A, Abdollah-zadeh A, Entesari S, Saeid T, Wang JT (2023) The effects of friction stir welding on microstructure and formability of 7075–T6 sheet. Results Eng 18:101041. https://doi.org/10.1016/j.rineng.2023.10104110.1016/j.rineng.2023.101041 ↗