Black PEO Coatings on Titanium and Titanium Alloys Produced at Low Current Densities
Source abstract
Abstract
Black coatings were successfully formed on Grade 2 (G2) and Grade 5 (G5) titanium alloy by means of a direct-current Plasma Electrolytic Oxidation (PEO) process at a very low current density of 0.05 A/cm2. The impact of two different treatment times (30 min and 60 min) was examined. The electrolyte for the PEO process was a phosphate base solution Na5P3O10 containing FeSO4 and (NH4)6Mo7O24 as coloring additives. PEO-coated samples were subjected to optical, morphological, structural, chemical, and electrochemical characterization. XRD, EDS, and XPS data analyses revealed that anion MoO42− and metal cation Fe3+ were successfully incorporated into the coatings. The results demonstrated that PEO-coated samples prepared after 60 min exhibit a stronger black color than those created after 30 min, with an absorptance maximum of 0.86. Furthermore, all prepared PEO coatings improve the corrosion resistance of bare titanium. Among them, the 60-minute PEO coatings on both alloys were the ones with the best corrosion properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial Engineering, University of Padova, Via F. Marzolo 9, 35131 Padova, Italy
Institute of Condensed Matter Chemistry and Technologies for Energy (ICMATE), National Research Council (CNR) and Department of Chemical Sciences, University of Padova, Via F. Marzolo, 1, 35131 Padova, Italy
References (64)
Show source-provided references
1. Studies on Black Electroless Nickel Coatings on Titanium Alloys for Spacecraft Thermal Control Applications10.1007/s10800-009-9980-5 ↗
2. Microstructure and Corrosion of Laser Cladding Coatings on Titanium Alloy with Nd2O310.1115/1.4048280 ↗
3. Study of the Properties of Qxide Coatings Formed on Titanium by Plasma Electrolytic Oxidation Method10.18321/ectj930 ↗
4. Effects of High Temperature Treatment on Microstructure and Mechanical Properties of Laser-Clad NiCrBSi/WC Coatings on Titanium Alloy Substrate10.1016/j.matchar.2014.10.003 ↗
5. Synthesis, Corrosion, and Wear Resistance of a Black Microarc Oxidation Coating on Pure Titanium10.1016/j.surfcoat.2020.125454 ↗
6. Novel Hydroxyapatite/Graphene Oxide/Collagen Bioactive Composite Coating on Ti16Nb Alloys by Electrodeposition10.1016/j.msec.2019.03.078 ↗
7. Decorative Black Coatings on Titanium Surfaces Based on Hard Bi-Layered Carbon Coatings Synthesized by Carbon Implantation10.1016/j.surfcoat.2018.11.060 ↗
8. Three Types of Ceramic Coating Applicability in Automotive Industry for Wear Resistance Purpose10.1108/00368790510601680 ↗
9. Black PEO Coating with Enhanced Thermal Stability on Titanium Alloy and Its Thermal Control Properties10.1016/j.surfcoat.2021.127934 ↗
10. Effect of Frequency on Black Coating Formation on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation in Aluminate-Tungstate Electrolyte10.1016/j.surfcoat.2019.05.012 ↗
11. Plasma Electrolytic Oxidation of AZ31 Magnesium Alloy in Aluminate-Tungstate Electrolytes and the Coating Formation Mechanism10.1016/j.jallcom.2017.07.117 ↗
12. Black Anodic Coatings for Space Applications: Study of the Process Parameters, Characteristics and Mechanical Properties10.1016/j.jmatprotec.2009.02.013 ↗
13. Fabrication of Multifunctional Black PEO Coatings on AA7075 for Spacecraft Applications10.1016/j.surfcoat.2016.09.043 ↗
14. The Black and White Coatings on Ti-6Al-4V Alloy or Pure Titanium by Plasma Electrolytic Oxidation in Concentrated Silicate Electrolyte10.1016/j.apsusc.2017.09.109 ↗
15. Role of Cobalt Additive on Formation and Anticorrosion Properties of PEO Coatings on AA2024 Alloy in Alkali-Silicate Electrolyte10.1016/j.surfcoat.2021.128075 ↗
16. An Investigation of Different Ceramic Coating Thermal Properties10.1016/j.matdes.2004.12.010 ↗
17. Black Coatings: A Review10.1051/epjap/2010155 ↗
18. Preparation and Characterisation of Black Ceramic Coating on AZ91D Magnesium Alloy by Plasma Electrolytic Oxidation with Reduced Energy Consumption10.1179/1432891715Z.0000000001309 ↗
19. Development of Vanadium Impregnated Flat Absorber Composite PEO Coating on AA6061 Alloy10.1016/j.surfcoat.2021.126891 ↗
20. Effects of Na2WO4 and Na2SiO3 Additives in Electrolytes on Microstructure and Properties of PEO Coatings on Q235 Carbon Steel10.1016/j.jallcom.2009.03.098 ↗
21. Influence of Zr4+ Ions on Solar Absorbance and Emissivity of Coatings Formed on AZ31 Mg Alloy by Plasma Electrolytic Oxidation10.1016/j.surfcoat.2015.01.070 ↗
22. Yi, A., Liao, Z., Zhu, W., Zhu, Z., Li, W., Li, K., Chen, K., and Huang, S. (2020). Influence of Electrolyte Temperature on the Color Values of Black Plasma Electrolytic Oxidation Coatings on AZ31B Mg Alloy. Coatings, 10.10.3390/coatings10090890 ↗
23. Shrestha, S., and Shashkov, P. (2006, January 19–23). Dunn, Microstructural and thermo-optical properties of black keronite peo coating on aluminium alloy aa7075 for spacecraft materials applications. Proceedings of the 10th ISMSE & the 8th ICPMSE, Collioure, France.
24. Sikdar, S., Menezes, P.V., Maccione, R., Jacob, T., and Menezes, P.L. (2021). Plasma Electrolytic Oxidation (Peo) Process—Processing, Properties, and Applications. Nanomaterials, 11.10.3390/nano11061375 ↗
25. Thermal Control Coatings on Magnesium Alloys Prepared by Plasma Electrolytic Oxidation10.1016/j.apsusc.2013.04.115 ↗
26. Doping and Defects: The Coloring Mechanism of Black Plasma Electrolytic Oxidation (PEO) Films on Aluminum Alloys10.1016/j.surfcoat.2021.128035 ↗
27. Electrochemically-Induced TiO2 Incorporation for Enhancing Corrosion and Tribocorrosion Resistance of PEO Coating on 7075 Al Alloy10.1016/j.corsci.2018.08.037 ↗
28. Development of Black Corrosion-Resistant Ceramic Oxide Coatings on AA7075 by Plasma Electrolytic Oxidation10.1007/s12666-018-1459-9 ↗
29. Black Decorative Anticorrosion Coatings Obtained on Aa2024 Alloy by Plasma–Electrolytic Treatment and Inhibition
30. Optimization of Thermal Control and Corrosion Resistance of PEO Coatings on 7075 Aluminum Alloy by Frequency Alteration10.1016/j.surfcoat.2022.128797 ↗
31. Characterization and Properties of PEO Coatings on 7075 Al Alloy Grown in Alkaline Silicate Electrolyte Containing KMnO4 Additive10.1016/j.surfcoat.2017.09.056 ↗
32. Formation of Black Ceramic Layer on Aluminum Alloy by Plasma Electrolytic Oxidation in Electrolyte Containing Na2WO410.2320/matertrans.M2011263 ↗
33. High Emissivity Coatings on Titanium Alloy Prepared by Micro-Arc Oxidation for High Temperature Application10.1007/s10853-011-6017-3 ↗
34. Black Ceramic Coatings on Ti Alloy with Enhanced High Absorptivity and High Emissivity by Plasma Electrolytic Oxidation10.1111/ijac.13198 ↗
35. Influence of FeSO4 Concentration on Thermal Emissivity of Coatings Formed on Titanium Alloy by Micro-Arc Oxidation10.1016/j.apsusc.2011.07.118 ↗
36. Influence of Co(CH3COO)2 Concentration on Thermal Emissivity of Coatings Formed on Titanium Alloy by Micro-Arc Oxidation10.1016/j.cap.2011.06.023 ↗
37. Development and Characterization of High Emittance and Low-Thickness Plasma Electrolytic Oxidation Coating on Ti6Al4V for Spacecraft Application10.1007/s11665-021-05862-6 ↗
38. Flat Absorber Black PEO Coatings on Ti6Al4V for Spacecraft Thermal Control Application10.1016/j.ceramint.2022.09.335 ↗
39. Preparation of Black High Absorbance and High Emissivity Thermal Control Coating on Ti Alloy by Plasma Electrolytic Oxidation10.1016/j.surfcoat.2014.05.032 ↗
40. Preparation of High Emissivity and Low Absorbance Thermal Control Coatings on Ti Alloys by Plasma Electrolytic Oxidation10.1016/j.surfcoat.2014.01.034 ↗
41. A Facile Preparation of Ceramic Coatings on Ti Alloys for Thermal Protection Systems10.1016/j.solmat.2015.07.009 ↗
42. Preparation of Thermal Control Coatings on Ti Alloy by Plasma Electrolytic Oxidation in K2ZrF6 Solution10.1016/j.surfcoat.2015.01.032 ↗
43. An Approach for Room-Temperature Multi-Directional Forging of Pure Titanium for Strengthening10.1016/j.msea.2018.06.060 ↗
44. Optical, Thermal and Structural Characteristics of Carbon Nanoparticles Embedded in ZnO and NiO as Selective Solar Absorbers10.1016/j.solmat.2008.04.023 ↗
45. NIH Image to ImageJ: 25 Years of Image Analysis10.1038/nmeth.2089 ↗
46. Graphene Oxide (GO) Decorated on Multi-Structured Porous Titania Fabricated by Plasma Electrolytic Oxidation (PEO) for Enhanced Antibacterial Performance10.1016/j.matdes.2020.109443 ↗
47. Influence of Post-Treatment on the Corrosion Resistance of PEO Coated AM50B and AM60B Mg Alloys10.1016/j.surfcoat.2010.08.022 ↗
48. Assessment of Jojoba as a Pure and Nano-Fluid Base Oil in Minimum Quantity Lubrication (MQL) Hard-Turning of Ti–6Al–4V: A Step towards Sustainable Machining10.1016/j.jclepro.2020.122553 ↗
49. Review of Plasma Electrolytic Oxidation of Titanium Substrates: Mechanism, Properties, Applications and Limitations10.1016/j.apsadv.2021.100121 ↗
50. Highly Sensitive and Selective Detection of Dimethylamine through Nb-Doping of TiO2 Nanotubes for Potential Use in Seafood Quality Control10.1016/j.snb.2019.127217 ↗
51. (2023, June 12). IST X-Ray PhotoElectron Spectroscopy Database, NIST Standard Reference Database 20, Version 4.1, Web Version. Available online: https://searchworks.stanford.edu/view/9742414.
52. Effect of Microstructure and Porosity of AlSi10Mg Alloy Produced by Selective Laser Melting on the Corrosion Properties of Plasma Electrolytic Oxidation Coatings10.1016/j.surfcoat.2020.126477 ↗
53. Deconvolving Double-Layer, Pseudocapacitance, and Battery-like Charge-Storage Mechanisms in Nanoscale LiMn2O4 at 3D Carbon Architectures10.1016/j.electacta.2018.04.149 ↗
54. Influence of Silicon Morphology on Direct Current Plasma Electrolytic Oxidation Process in AlSi10Mg Alloy Produced with Laser Powder Bed Fusion10.1038/s41598-022-18176-x ↗
55. Pezzato, L., Vranescu, D., Sinico, M., Gennari, C., Settimi, A.G., Pranovi, P., Brunelli, K., and Dabalà, M. (2018). Tribocorrosion Properties of PEO Coatings Produced on AZ91 Magnesium Alloy with Silicate- or Phosphate-Based Electrolytes. Coatings, 8.10.3390/coatings8060202 ↗
56. PEO Coatings with Active Protection Based on In-Situ Formed LDH-Nanocontainers10.1149/2.0301702jes ↗
57. Investigation of Hydroxyapatite (HAP) Containing Coating on Grade 2 Titanium Alloy Prepared by Plasma Electrolytic Oxidation (PEO) at Low Voltage10.1016/j.surfin.2022.101888 ↗
58. The Influence of Temperature on the Color of TiO2:Cr Pigments10.1016/j.materresbull.2008.10.007 ↗
59. Formulation of Water-Based White Colour Paint from Waste Titanium Dioxide10.1016/j.matpr.2021.09.360 ↗
60. Review on: Titanium Dioxide Applications10.1016/j.egypro.2018.11.159 ↗
61. Microstructure, Corrosion and Wear Performance of Plasma Electrolytic Oxidation Coatings Formed on Ti-6Al-4V Alloy in Silicate-Hexametaphosphate Electrolyte10.1016/j.surfcoat.2012.12.003 ↗
62. Influence of Different Sodium-Based Additives on Corrosion Resistance of PEO Coatings on Pure Ti10.1080/21870764.2019.1604609 ↗
63. Plasma Electrolytic Oxidation (PEO) Process on Commercially Pure Ti Surface: Effects of Electrolyte on the Microstructure and Corrosion Behavior of Coatings10.1007/s11661-018-4824-8 ↗
64. Effect of Solution and Aging Treatments on Corrosion Performance of Laser Solid Formed Ti-6Al-4V Alloy in a 3.5 Wt. % NaCl Solution10.1016/j.jmrt.2019.11.082 ↗