Flow Boiling of R450A, R515B, and R1234ze(E) Inside a 7.0 mm OD Microfin Tube: Experimental Comparison and Analysis of Boiling Mechanisms

A comparative analysis of the flow boiling characteristics of R450A, R515B, and R1234ze(E) inside a 7.0 mm OD microfin tube was performed. The mass velocity was explored from low values, starting from 50 kg m−2 s−1, up to 400 kg m−2 s−1, and the heat flux was tested in the range of 10–50 kW m−2, keeping a constant saturation temperature of 30 °C at the inlet of the test section. R515B and R1234ze(E) showed similar values of the heat transfer coefficient and frictional pressure gradient under all the investigated working conditions. R450A showed lower values of the heat transfer coefficient, especially at low heat flux and high mass velocity, compared to R515B and R1234ze(E), but the gap of the heat transfer performance between the three fluids reduced at high heat flux. The frictional pressure drops of R450A were generally lower than those of R515B and R1234ze(E). In the end, some correlations for the evaluation of both the heat transfer coefficient and the pressure drop were selected, and the estimated values were compared against the experimental counterpart. Furthermore, the effects of nucleate boiling and of convective boiling, as well as of the temperature glide for R450A, were analyzed and estimated.