journal article·2022-06-09Open access

Reliability Assessment of PAUT Technique in Lieu of RT for Tube Welds in Thermal Power Plant Facilities

Yu Min Choi, Dongchan Kang, Young Lae Kim, Sungjong Cho, Taesung Park, Ik Keun Park

Applied Sciences· Volume 12· Issue 12

Abstract

In this study, a reliability evaluation of the phased array ultrasonic testing (PAUT) method was performed to examine the applicability of the method for tube weld specimens with flaws having the same specifications as the tubes in the boilers of thermal power plant facilities. To this end, test specimens were fabricated by inserting flaws into tube welds with identical materials and specifications to those used in the thermal power plant. PAUT data acquisition was obtained using a round robin test (RRT) on the fabricated specimen, and the data were compared with the results of radiographic testing (RT) for a comparative evaluation of the flaw detection performance. In addition, for quantitative reliability analysis, the flaw detection performance (probability of detection; POD) and the error in the sizing accuracy (root-mean-square error; RMSE) were calculated with different materials of the specimens (carbon steel, stainless steel, dissimilar metal) and flaw types (volumetric, planar). In the analysis results, for high-risk planar defects, the PAUT technique exhibited superior flaw detection performance to the RT technique. A POD analysis of the PAUT technique indicated that flaws of 6.9 mm length were detected at 80% probability for total tube specimens. Furthermore, a reliability analysis was performed for test specimens of different materials and flaw types, and the results were derived. Through the findings of this study, the applicable range of the PAUT technique was examined, and a technical basis for PAUT in lieu of RT was established.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Graduate School, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

Graduate School of Nano IT Design Fusion, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

NDT Research Center, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

KEPCO KPS, 211 Munhwa-ro, Naju-si 58326, Korea

Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

Funding

Korea Institute of Energy Technology Evaluation and Planning (KETEP) · Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea

References (18)

Show source-provided references
1. A new eddy current method for nondestructive testing of creep damage in austenitic boiler tubing10.1080/10589750802195527 ↗
2. Xueqin, L., Gang, L., and Shangqing, L. (2008, January 6–9). The development of the boiler water wall tube inspection. Proceedings of the 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies, Nanjing, China.10.1109/DRPT.2008.4523817 ↗
3. Boiler tubes failures: A compendium of case studies10.1007/s11668-015-9923-x ↗
4. Advances and researches on non destructive testing: A review10.1016/j.matpr.2017.11.620 ↗
5. State of the art review of inspection technologies for condition assessment of water pipes10.1016/j.measurement.2012.05.032 ↗
6. Feng, Q., Li, R., Nie, B., Liu, S., Zhao, L., and Zhang, H. (2017). Literature review: Theory and application of in-line inspection technologies for oil and gas pipeline girth weld defection. Sensors, 17.10.3390/s17010050 ↗
7. Korean Round-Robin Tests Result for New International Program to Assess the Reliability of Emerging Nondestructive Techniques10.1016/j.net.2016.09.006 ↗
8. Moran, T.L., Ramuhalli, P., Pardini, A.F., Anderson, M.T., and Doctor, S.R. (2010). Replacement of Radiography with Ultrasonics for the Nondestructive Inspection of Welds—Evaluation of Technical Gaps—An Interim Report.
9. Moran, T.L., Prowant, M., Nove, C.A., Pardini, A.F., Crawford, S.L., Cinson, A.D., and Anderson, M.T. (2015). Applying Ultrasonic Testing in Lieu of Radiography for Volumetric Examination of Carbon Steel Piping, Report No. NUREG/CR-7204, PNNL-24232.
10. Beam focusing behavior of linear phased arrays10.1016/S0963-8695(99)00043-2 ↗
11. Development of an ultrasonic phased array system for nondestructive tests of nuclear power plant components10.1016/S0029-5493(02)00024-9 ↗
12. Internal damage evaluation of composite structures using phased array ultrasonic technique: Impact damage assessment in CFRP and 3D printed reinforced composites10.1016/j.compositesb.2018.11.091 ↗
13. Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics10.1016/j.compstruct.2015.08.119 ↗
14. Kim, Y., Cho, S., and Park, I.K. (2021). Analysis of Flaw Detection Sensitivity of Phased Array Ultrasonics in Austenitic Steel Welds According to Inspection Conditions. Sensors, 21.10.3390/s21010242 ↗
15. Braatz, B.G., Heasler, P.G., and Meyer, R.M. (2014). PARENT Quick Blind Round-Robin Test Report, Report No. PNNL-22677.10.2172/1177713 ↗
16. Annis, C. (2020, August 03). Statistical Best-Practices for Building Probability of Detection (POD) Models. R Package mh1823 2010, Version 2.5.4.4. Available online: http://StatisticalEngineering.com/mh1823/.
17. Austenitic steel piping testing exercises in PISC10.1016/0029-5493(95)00991-K ↗
18. Reliability considerations of NDT by probability of detection (POD) determination using ultrasound phased array10.1016/j.engfailanal.2013.06.008 ↗