journal article·2021-10-08Open access

Design and Implementation of Inverse Kinematics and Motion Monitoring System for 6DoF Platform

Ming-Yen Wei

Applied Sciences· Volume 11· Issue 19

Abstract

Six-axis motion platforms have a low contraction height and a high degree of freedom. First of all, the designed six-axis crank arm platform, including the motor, reducer, crank arm, link, platform support arm, and upper and lower platforms, can be designed for different bearing requirements. Secondly, it uses a coordinate transform and kinematics theory to derive each motor rotor angle. A set of platform data acquisition (DAQ) monitoring modules was established, and the LabVIEW programming language was used to write measurement software. The monitoring items include displacement, speed, and acceleration, which can be displayed on the screen and recorded by an industrial computer in real time and dynamically. Then, an RS-485 or RS-232 communication transmission interface was used to provide the control system with the related movement information. Finally, an industrial computer combined with a motion control card was used as a control kernel to realize the control algorithms, internet module function, I/O write and read signals, firmware integration, and human–machine interface message. The experimental results validate the appropriateness of the proposed method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Robotic Mechanisms and Dynamics · Teleoperation and Haptic Systems · Mechatronics Education and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Aeronautical System Research Division Simulation System Section, National Chung-Shan Institute of Science and Technology, Taichung 407, Taiwan

References (21)

Show source-provided references
1. Designing an adaptive interface: Using eye tracking to classify how information usage changes over time in partially automated vehicles10.1109/ACCESS.2020.2966928 ↗
2. An error identification and compensation method of a 6-DoF parallel kinematic machine10.1109/ACCESS.2020.3005141 ↗
3. Nabi, H.N., Ullah, S., and Munir, A. (2014, January 14–18). Kinematics analysis of three-degree-of freedom parallel manipulator with crank arm actuator. Proceedings of the 2014 11th International Bhurban Conference on Applied Sciences & Technology (IBCAST), Islamabad, Pakistan.10.1109/IBCAST.2014.6778143 ↗
4. Pan, C.T., Sun, P.Y., Li, H.J., Hsieh, C.H., Hoe, Z.Y., and Shiue, Y.L. (2021). Development of multi-axis crank linkage motion system for synchronized flight simulation with VR immersion. Appl. Sci., 11.10.3390/app11083596 ↗
5. A platform with six degrees of freedom10.1243/PIME_PROC_1965_180_029_02 ↗
6. A Stewart platform-based manipulator: General theory and practical construction10.1177/027836498600500216 ↗
7. A direct determination of the instantaneous kinematics of fully parallel manipulators10.1115/1.3258713 ↗
8. Kinematic analysis of a Stewart platform manipulator10.1109/41.222651 ↗
9. Investigation of kinematic analysis and applications for a 3-RRPS parallel manipulator
10. Dynamic neural networks for kinematic redundancy resolution of parallel Stewart platforms10.1109/TCYB.2015.2451213 ↗
11. Lara-Molina, F.A., Rosario, J.M., and Dumur, D. (2010, January 7–9). Architecture of predictive control for a Stewart platform manipulator. Proceedings of the 2010 8th World Congress on Intelligent Control and Automation, Jinan, China.10.1109/WCICA.2010.5554439 ↗
12. A Nonlinear, MPC-based motion cueing algorithm for a high-performance, nine-DoF dynamic simulator platform10.1109/TCST.2016.2560120 ↗
13. Asadi, H., Mohammadi, A., Mohamed, S., Qazani, M.R.C., Lim, C.P., Khosravi, A., and Nahavandi, S. (2019, January 6–9). A model predictive control-based motion cueing algorithm using an optimized nonlinear scaling for driving simulators. Proceedings of the 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC), Bari, Italy.10.1109/SMC.2019.8914597 ↗
14. Tang, Z., Hu, M., Pei, Z., Liu, L., and Zhang, J. (2016, January 27–29). A new numerical method for Stewart platform forward kinematics. Proceedings of the 2016 35th Chinese Control Conference (CCC), Chengdu, China.
15. Lou, J.H., and Tseng, S.P. (2014, January 6–8). Developing a real-time serial servo motion control system for electric Stewart platform. Proceedings of the 2014 International Conference on Advanced Robotics and Intelligent Systems (ARIS), Taipei, Taiwan.10.1109/ARIS.2014.6871494 ↗
16. A linear time-varying model predictive control-based motion cueing algorithm for hexapod simulation-based motion platform10.1109/TSMC.2019.2958062 ↗
17. Increasing motion fidelity in driving simulators using a fuzzy-based washout filter10.1109/TIV.2019.2904388 ↗
18. (2021, August 26). Available online: https://docplayer.net/34514506-How-to-build-an-arduino-powered-6dof-motion-platform.html.
19. A efficient numerical method for forward kinematics of parallel robots10.1109/ACCESS.2019.2940064 ↗
20. Research on position inverse solution of electric-driven Stewart platform based on Simulink
21. Sciavicco, L., and Siciliano, B. (2000). Modelling and Control of Robot Manipulators, Springer.10.1007/978-1-4471-0449-0 ↗