Numerical Investigation of Asphalt Concrete Fracture Based on Heterogeneous Structure and Cohesive Zone Model

The fracture behavior of asphalt concrete is closely related to its internal structure. A deep understanding of the relationship between the internal structure and fracture behavior of asphalt concrete is very important for sustainable and durable pavement design. In this paper, a CZM-based FE model was developed to investigate the fracture behavior of asphalt concrete. An image-aided approach was used to generate the 3-D internal heterogeneous structure of asphalt concrete. A series of 2-D cross sections were extracted from the 3-D structure for finite element modeling. Then numerical simulations of SCB tests were conducted and validated with experimental results. With the validated CZM-based FE model, the effects of some critical factors, including temperature, loading rate, aggregate geometry, fracture strength, and fracture energy, on the fracture behavior of asphalt concrete were investigated. The analysis results showed that the average damage of the adhesive elements was higher than that of the cohesive elements at the peak load. At lower temperatures, asphalt concrete tends to crack earlier, and the cracking path tends to be marginally closer to the aggregates. A higher loading rate may induce more, but minor, element damage since the CZM elements in asphalt mortar cannot bear much more stress through deformation. Angular aggregates may induce a higher percentage of damaged elements, especially adhesive-damaged elements. On average, each 10% increase in fracture energy allows the specimen to bear 2.31% more load and 2.82% more displacement. Sufficient fracture energy could improve the ability of asphalt concrete to resist fracture.