journal article·2022-09-15Open access

Investigation into Dynamic Behaviors of High-Temperature Sandstone under Cyclic Impact Loading Using DIC Technology

Hua Lu, Qiaoli Chen, Xiaotong Ma

Applied Sciences· Volume 12· Issue 18

Abstract

Coal resources are rich in Ningxia. Long-term mining creates mine goaf, which causes coal to burn spontaneously for a very long time. Unavoidably, the rocks around the coal fire area are affected by high temperatures, which can alter the characteristics of rocks and lead to safety accidents. To explore the temperature influence of sandstone in coal fire areas under cyclic impact loading, the sandstone treated under different temperatures is tested by a split Hopkinson pressure bar (SHPB). The mechanical properties of rocks treated at different temperatures are obtained. The composition of rock is determined, and the energy dissipation is calculated. Meantime, the digital image correlation (DIC) method is applied to study the mechanical behaviors of sandstone. The results show that at the first impact, the peak stress of sandstone decreases as the temperature increases. However, there is no obvious trend in the peak strain. Under the SHPB cyclic impact, the sandstone specimen is completely destroyed after two to three times of impact at different temperatures. At 25~1000 °C, the dynamic peak stress of sandstone decreases with the increase in impact times, and brittle failure occurs. When the impact pressure is 0.6 MPa, the incident energy increases with the impact velocity; the dynamic peak stress increases with the transmitted energy. Using the DIC method, it is found that when the temperature is below 800 °C, the dynamic characteristics of rock specimen have a close correlation with the crack initiation point and extreme point. When the temperature exceeds 800 °C, the rock specimen is seriously damaged, the overall strain is small, and the stress transfer efficiency is low. These findings show that temperature significantly affects the mechanical properties and initial damage of the sandstone, and the performance and damage are abrupt at 800 °C. Meanwhile, the DIC technology can effectively characterize the strain evolution of rock materials and explain the formation and propagation process of cracks, which provides a valid means for studying the damage and crack evolution of materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Rock Mechanics and Modeling · Landslides and related hazards

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, North Minzu University, Yinchuan 750021, China

College of Civil and Hydraulic Engineering, Ningxia University, Yinchuan 750021, China

Ningxia Center for Research on Earthquake Protection and Disaster Mitigation in Civil Engineering, Yinchuan 750021, China

Funding

Ningxia Natural Science Foundation of China · Ningxia Key Research and Development Program of China · Outstanding Young Teachers Training Foundation of Ningxia of China · West Light Foundation of The Chinese Academy of Sciences · Ningxia Outstanding Talent Support Program Project of China

References (38)

Show source-provided references
1. Nonlinear behavior and damage model for fractured rock under cyclic loading based on energy dissipation principle10.1016/j.engfracmech.2018.12.010 ↗
2. Experimental study on evolution characteristics of coal pores under impact loadings
3. Study of rock joints under cyclic loading conditions10.1007/BF01040116 ↗
4. Damage evolution study of sandstone by cyclic uniaxial test and digital image correlation10.1016/j.tecto.2013.06.007 ↗
5. Analysis of the Behavior of Sedimentary Rocks under Impact Loading10.1007/s00603-016-1010-4 ↗
6. FEA of Urban Rock Tunnels under Impact Loading at Targeted Velocity10.1007/s10706-021-01987-6 ↗
7. Responses of jointed rock masses subjected to impact loading10.1016/j.jrmge.2017.12.006 ↗
8. Study on the Dynamic Mechanical Properties of Metamorphic Limestone under Impact Loading10.2113/2021/8403502 ↗
9. Li, X., Wu, Y., He, L., Zhang, X., and Wang, J. (2022). Research on Dynamic Properties of Deep Marble Influenced by High Temperature. Mathematics, 10.10.3390/math10152603 ↗
10. Study on the Fractal Characteristics of the Pomegranate Biotite Schist under Impact Loading10.1155/2021/1570160 ↗
11. Dynamic mechanical behavior of some carbonate rocks10.1016/j.ijrmms.2009.12.003 ↗
12. Dynamic Characteristics of Granite Subjected to Intermediate Loading Rate10.1007/s00603-004-0030-7 ↗
13. Jin, J. (2012). Study on Rock Dynamic Mechanical Properties of under Coupled Static-Cyclic Impact Loading. [Ph.D. Thesis, Central South University]. (In Chinese).
14. Stress-strain curve and stress wave characteristics of rock subjected to cyclic impact loadings
15. Evolution model for damage accumulation of rock under cyclic impact loadings and effect of static loads on damage evolution
16. Experimental study on energy dissipation of mudstone in coal mine under impact loading
17. High Strain-Rate Characterization of Deccan Trap Rocks Using SHPB Device10.1061/(ASCE)MT.1943-5533.0002229 ↗
18. Strain rate effect and energy dissipation characteristics of sandstone in coal measures under impact loading
19. Fatigue and dynamic energy behaviour of rock subjected to cyclical loading10.1016/j.ijrmms.2008.05.002 ↗
20. Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading10.1016/j.ijrmms.2004.08.008 ↗
21. Dynamic Properties of Thermally Treated Granite Subjected to Cyclic Impact Loading10.1007/s00603-018-1606-y ↗
22. Effect of thermal treatment on energy dissipation of granite under cyclic impact loading10.1016/S1003-6326(19)64948-4 ↗
23. The Effects of Temperature and Pressure on the Porosity Evolution of Flechtinger Sandstone10.1007/s00603-013-0401-z ↗
24. Pathiranagei, S.V., and Gratchev, I. (2022). Coupled thermo-mechanical constitutive damage model for sandstone. J. Rock Mech. Geotech. Eng.10.1016/j.jrmge.2022.02.010 ↗
25. Microfabric characteristics of tight sandstone of Xujiahe formation in western Sichuan after high temperature and the effect on mechanical properties
26. Experiments on Mechanical Properties of Siliceous Sandstone after High Temperature
27. Fracturing mechanism of rock-like specimens with different joint densities based on DIC technology
28. Pre-Peak and Post-Peak Rock Strain Characteristics during Uniaxial Compression by 3D Digital Image Correlation10.1007/s00603-016-0935-y ↗
29. Study on the single crack propagation and damage evolution characteristics of rock materials based on DIC
30. Experimental study on crack propagation and damage monitoring of sandstone using three-dimensional digital image correlation technology
31. Application of 3D-DIC system in rock mechanic test
32. Application of DIC Technique for Studies of Kuru Granite Rock under Static and Dynamic Loading10.1016/j.mspro.2014.06.114 ↗
33. Application of Digital Image Correlation (DIC) in Dynamic Notched Semi-Circular Bend (NSCB) Tests10.1007/s11340-014-9863-5 ↗
34. Investigation of the rate dependence of fracture propagation in rocks using digital image correlation (DIC) method10.1016/j.engfracmech.2015.02.021 ↗
35. Experimental study on impact dynamic characteristics of layered composite rocks
36. Subsidiary for Mining Design and Research, General Institute of Coal Science and Research (2009). Methods for Determining Physical and Mechanical Properties of Coal and Rock Part 4: Methods for Calculating Porosity of Coal and Rock. Standard, General Administration of State Quality Supervision, Inspection and Quarantine of the People’s Republic of China, China National Standardization Management Committee.
37. Experimental study on dynamic characteristics of sandstone after different high temperature cyclings
38. Dynamic material property characterization by using split Hopkinson pressure bar (SHPB) technique10.1016/S0029-5493(03)00189-4 ↗