Experimental Study on Small-Strain Shear Modulus of Unsaturated Silty-Fine Sand
Source abstract
Abstract
The small-strain stiffness of soil is significant in the accurate prediction of the deformation caused by interactions between foundation soil and structures. Considering the whole range of small strain (10−6~10−3), a bending element-resonant column (BE-RC) combined test system was developed to conduct continuous tests on the shear modulus of unsaturated soil. Under the dehydration path, it was used to investigate the small-strain shear modulus of unsaturated silty-fine sand in Hangzhou Bay, China. The results show that the shear modulus under different net stresses and matrix suctions appeared to non-linearly decay with the increase in strain until stable values were reached at a large strain. At the beginning from the saturated state, the Gmax value increased slowly with decreasing saturation and reached its maximum value at the optimum saturation (Sr)opt; then, it rapidly decayed to the level in the saturated, once the saturation degree decreased to a level lower than (Sr)opt. Additionally, an improved prediction model was proposed for the Gmax of unsaturated sand, considering different saturations. Based on the mesoscopic evolution of internal pore water morphology and the variation in intergranular stress caused by capillary action, the variation in the Gmax could be divided into three segments of saturation: the boundary effect stage, the transition stage and the unsaturated residual stage.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Landslides and related hazards · Soil and Unsaturated Flow
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China
Academy of Railway Sciences Engineering Consult Co., Ltd., Beijing 100081, China
Second Institute of Oceanography, MNR, Hangzhou 310012, China
Funding
NATURAL SCIENCE FOUNDATION OF CHINA
References (44)
Show source-provided references
1. Impact of effective stress on the dynamic shear modulus of unsaturated sand10.1061/41095(365)38 ↗
2. Atkinson, J.H., and Sallfors, G. (1991, January 26–30). Experimental determination of stress–strain–time characteristics in laboratory and in situ tests. Proceedings of the 10th European Conference on Soil Mechanics and Foundation Engineering, Florence, Italic.
3. Non-linear soil stiffness in routine design10.1680/geot.2000.50.5.487 ↗
4. Scaling shear modulus from small to finite strain for unsaturated soils10.1061/(ASCE)GT.1943-5606.0001819 ↗
5. Impacts of drying-wetting and loading-unloading cycles on small-strain shear modulus of unsaturated soils10.1061/(ASCE)GM.1943-5622.0001463 ↗
6. Shear modulus and damping in soils: Measurement and parameter effects10.1061/JSFEAQ.0001756 ↗
7. Drnevich, V.P. (1978). Resonant column testing: Problems and solutions. Dynamic Geotechnical Testing, ASTM International.10.1520/STP35687S ↗
8. Dynamic moduli and damping ratios for cemented sands at low strains10.1139/t88-036 ↗
9. Estimate of elastic shear modulus in Holocene soil deposits10.3208/sandf.36.4_45 ↗
10. (2015). Standard Test Method for Modulus and Damping of Soils by Fixed–Base Resonant–Column Method (Standard No. ASTM Standard D4015).
11. Shear-wave measurements in laboratory sediments10.1121/1.381760 ↗
12. Dyvik, R., and Madshus, C. (1985, January 24). Laboratory measurements of Gmax using bender elements. Proceedings of the ASCE Annual Convention: Advances in the Art of Testing Soils under Cyclic Conditions, Detroit, MI, USA.
13. Modulus-suction-moisture relationship for compacted soils10.1139/T08-033 ↗
14. Small–strain stiffness of salt–cemented granular media under low confinement10.1680/geot.10.T.004 ↗
15. A study of wave velocities and Poisson ratio of recycled concrete aggregate10.1016/j.sandf.2016.07.002 ↗
16. Effects of confining pressure and degree of saturation on wave velocities of soils10.1061/(ASCE)GM.1943-5622.0000727 ↗
17. Amoroso, S., Monaco, P., and Marchetti, D. (2013). Use of the Seismic Dilatometer (SDMT) to estimate in situ G–γ decay curves in various soil types. Geotechnical and Geophysical Site Characterization: Proceedings of the 4th International Conference on Site Characterization ISC–4, Taylor & Francis Books Ltd.
18. Unsaturated particulate materials–particle–level studies10.1061/(ASCE)1090-0241(2001)127:1(84) ↗
19. Correlation between small–strain shear modulus and suction stress in capillary regime under zero total stress conditions10.1061/(ASCE)GT.1943-5606.0001531 ↗
20. Effect of saturation on dynamic properties of compacted clay in a resonant column test10.1080/17486025.2016.1208849 ↗
21. Elastic wave velocities in granular soils
22. Capillary effects on dynamic modulus of sands and silts10.1061/(ASCE)0733-9410(1984)110:9(1188) ↗
23. Small–strain behavior of a silty sand in controlled–suction resonant column torsional shear tests10.1139/t01-076 ↗
24. Dynamic properties of sand from dry to fully saturated states10.1680/geot.10.P.042 ↗
25. Strength and small–strain stiffness characteristics of unsaturated sand10.1520/GTJ103589 ↗
26. Impact of hydraulic hysteresis on the small–strain shear modulus of unsaturated sand10.1016/j.sandf.2018.02.018 ↗
27. Pham, H.Q. (2005). A Volume–Mass Constitutive Model for Unsaturated Soils. [Ph.D. Thesis, University of Saskatchewan].
28. Development and preliminary application of resonant column–bending element combined testing apparatus. CAES201810.1088/1755-1315/189/2/022084 ↗
29. (2021). Standard Test Method for Particle–Size Distribution (Gradation) of Fine–Grained Soils Using the Sedimentation (Hydrometer) Analysis (Standard No. ASTM Standard D7928-21e1).
30. (2016). Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Standard No. ASTM Standard D854-14).
31. (2019). Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table (Standard No. ASTM Standard D4253-16e1).
32. (2016). Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density (Standard No. ASTM Standard D4254-16).
33. A Close–form equation for predicting the hydraulic conductivity of unsaturated soils10.2136/sssaj1980.03615995004400050002x ↗
34. Some observations on the kinematic nature of soil stiffness10.3208/sandf1972.32.2_111 ↗
35. Application of soil stiffness gauge in assessing small–strain stiffness of sand with different fabrics and densities10.1520/GTJ13154 ↗
36. Influence of fines content and initial shear stress on dynamic properties of hydraulic reclaimed soil10.1139/t01-082 ↗
37. Dynamic moduli and damping ratios for Monterey No.0 sand by resonant column tests10.3208/sandf1972.29.2_37 ↗
38. Effects of grain size and grading on dynamic shear moduli of sands10.3208/sandf1972.17.3_19 ↗
39. Stress–history effects on shear modulus of soils10.3208/sandf1972.13.77 ↗
40. Semi-empirical model for estimating the small–strain shear modulus of unsaturated non–plastic sandy soils10.1007/s10706-013-9708-5 ↗
41. Hysteresis of capillary stress in unsaturated granular soil10.1061/(ASCE)0733-9399(2004)130:6(646) ↗
42. Interactions between two rough spheres, water bridge and water vapour10.1680/geot.2003.53.2.255 ↗
43. Theory of the stability of strongly charged lyophobic sols and of the adhesion of strongly charged particles in solutions of electrolytes10.1016/0079-6816(93)90013-L ↗
44. Single correction function for computing retarded van der Waals attraction10.1006/jcis.1995.9964 ↗