journal article·2022-07-02Open access

Preprocessing Acoustic Emission Signal of Broken Wires in Bridge Cables

Guangming Li, Zhen Zhao, Yaohan Li, Chun-Yin Li, Chi-Chung Lee

Applied Sciences· Volume 12· Issue 13

Abstract

Bridges, especially cable-stayed bridges, play an important role in modern transportation systems. The safety status of bridge cables, as an important component of cable-stayed bridges, determines the health status of the entire bridge. As a non-destructive real-time detection technology, acoustic emission has the advantages of high detection efficiency and low cost. This paper focuses on the issue that a large amount of data are generated during the process of health monitoring of bridge cables. A novel acoustic emission signal segmentation algorithm is proposed with the aim to facilitate the extraction of acoustic emission signal characteristics. The proposed algorithm can save data storage space efficiently. Moreover, it can be adapted to different working conditions according to the adjustment of parameters in order to accurately screen out the target acoustic emission signal. Through the acoustic emission signal acquisition experiments of three bridges, the characteristics of the noise signal in the acquisition process are extracted. A comprehensive analysis of the signal in the time domain, frequency domain and time-frequency domain is carried out. The noise signal filtering parameter thresholds are proposed according to the analysis results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Infrastructure Maintenance and Monitoring · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical, Electrical and Information Engineering, Shandong University, Weihai 264209, China

School of Science and Technology, Hong Kong Metropolitan University, Hong Kong, China

Funding

Key Coordinative Innovation Plan of Guangdong Province · Weihai Science and Technology Development Plan by the National Natural Science Foundation of China · Technology Developing Project of Shenzhen · China Postdoctoral Science Foundation · Shandong postdoctoral innovation project · Young Scholars Program of Shandong University, Weihai · Hong Kong SAR, RGC Faculty Development Scheme · RGC Research Matching Grant Scheme · HKMU Research and Development Fund

References (29)

Show source-provided references
1. Application of bridge health monitoring system in a bridge
2. Yuan, G., Zhang, C.X., and Hu, S.L. (2019, January 22–24). Big Data Based Bridge Anomaly Detection and Situational Awareness. Proceedings of the 2019 Chinese Automation Congress (CAC), Hangzhou, China.10.1109/CAC48633.2019.8996216 ↗
3. An Automated Inspection Method for the Steel Box Girder Bottom of Long-Span Bridges Based on Deep Learning
4. Study on the application of nondestructive testing technology in bridge road engineering
5. Sherine, M.E., and Kumari, S.L. (2017, January 20–21). Study of acoustic emission signals in continuous monitoring: A review. Proceedings of the International Conference on Circuit Power and Computing Technologies, Kollam, India.10.1109/ICCPCT.2017.8074174 ↗
6. Wavelet analysis of fatigue damage acoustic emission signal of carbon fiber bridge cables
7. Hu, Q. (2011). Fatigue Acoustic Emission Signal Processing and Damage Analysis of Bridge Cables, Dalian University of Technology.
8. Structural health monitoring of bridges with piezoelectric AE sensors10.1016/j.engfailanal.2015.03.009 ↗
9. Xin, G.L. (2020). Research on the Identification Method of Bridge Cable Breakage Signal Based on Acoustic Emission Technology, Shandong University.
10. Ren, B., and Chen, J. (2021, January 29–30). Fracture acoustic emission signals identification of broken wire using deep transfer learning and wavelet analysis. Proceedings of the International Conference on Artificial Intelligence and Information Systems, Tangerang Selatan, Indonesia.10.1145/3469213.3470230 ↗
11. Weld acoustic emission inspection of structural elements embedded in concrete
12. Failure Behavior of Room and Pillar with Different Room Configuration Under Uniaxial Loading Using Experimental Test and Numerical Simulation10.1007/s10706-022-02073-1 ↗
13. Discrete element modeling of strip footing on geogrid-reinforced soil
14. Three-dimensional Discrete Element Simulation of Interaction between Aqueduct and Tunnel
15. Monitoring and failure analysis of corroded bridge cables under fatigue loading using acoustic emission sensors10.3390/s120403901 ↗
16. Gaillet, L., Zejli, H., Laksimi, A., Tessier, C., Drissi-Habti, M., and Benmedakhene, S. (July, January 30). Detection by acoustic emission of damage in cable anchorage. Proceedings of the Non-Destructive Testing in Civil Engineering, Nantes, France.
17. Acoustic emission signal through turning tools: A computational study10.1016/j.procir.2013.06.128 ↗
18. Tool wear predictability estimation in milling based on multi-sensorial data10.1007/s00170-015-7317-6 ↗
19. Acoustic emission source location considering refraction in layered media with cylindrical surface10.1016/S1003-6326(20)65254-2 ↗
20. Jennings, S.J., Wu, T., and Regez, B. (November, January 31). A Review on Effective Acoustic Emission. Proceedings of the International Conference on Micro/Nano Sensors for Artificial Intelligence, Healthcare, and Robotics (NSENS), Shenzhen, China.
21. Universal Educational and Research Facility for the Study of the Processes of Generation and Propagation of Acoustic Emission Waves10.1134/S0020168517150158 ↗
22. Meng, X., Liu, W., and Ding, E. (2011, January 14–16). The Research of Acoustic Emission Signal Classification. Proceedings of the International Conference on Intelligent Information Hiding and Multimedia Signal Processing, Dalian, China.10.1109/IIHMSP.2011.101 ↗
23. Research progress of acoustic emission signal analysis and processing methods
24. Liu, K.L. (2017). Acoustic Emission Feature Extraction of Axle Cracks Based on Parametric Analysis, Dalian Jiaotong University.
25. Study on Spectrum Characteristics and Clustering of Acoustic Emission Signals from Rock Fracture10.1007/s00034-019-01168-0 ↗
26. Application of wavelet transform in evaluating the Kaiser effect of rocks in acoustic emission test10.1016/j.measurement.2022.110887 ↗
27. Yao, J. (2020). Research on the Detection of Broken Gear Teeth Based on Acoustic Emission Technology, Southwest University of Science and Technology.
28. Crackling noise in disordered materials10.1146/annurev-conmatphys-031113-133838 ↗
29. Multiple Avalanche Processes in Acoustic Emission Spectroscopy: Multibranching of the Energy—Amplitude Scaling10.1002/pssb.202100465 ↗