Modeling of Induction Motor Direct Starting with and without Considering Current Displacement in Slot
Source abstract
Abstract
This article presents a mathematical model of three-phase induction motor (IM) with a squirrel cage rotor and investigates its starting modes. Specifically, two scenarios are considered: direct starting of an IM and direct starting considering the current displacement effect in the rotor slots. Analyzing the starting modes of an IM without the use of automatic control systems is crucial for ensuring reliable, efficient, and safe operation of equipment across various industrial and commercial sectors. Understanding and accounting for the processes occurring during the starting mode of an IM allows for minimizing risks, enhancing energy efficiency, and reducing operational costs. This article details the mathematical modeling methods used for analyzing these starting modes and the results obtained from the modeling. These results were compared with data obtained experimentally, allowing for the assessment of the accuracy and reliability of the proposed model. The conducted research highlights the importance of considering current displacement in the rotor slots for accurate modeling and analysis of induction motor starting modes, particularly in capturing the differences in the amplitudes of the starting current and the faster transition to steady-state operation. Conclusions drawn from the comparison of modeling and experimental data provide valuable insights for the further development of control and operation methods for induction motors.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electric Motor Design and Analysis · Sensorless Control of Electric Motors · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Solid State Physics, University of Latvia, 8 Kengaraga, LV-1063 Riga, Latvia
Funding
European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2
References (60)
Show source-provided references
1. Manias, S. (2016). Power Electronics and Motor Drive Systems, Academic Press.10.1016/B978-0-12-811798-9.00012-3 ↗
2. Emadi, A. (2018). Energy-Efficient Electric Motors, Revised and Expanded, CRC Press.
3. Parekh, R. (2003). AC Induction Motor Fundamentals, Microchip Technology Inc.. (DS00887A).
4. Gregor, R. (2015). Induction Motors: Applications, Control and Fault Diagnostics, InTech. BoD–Books on Demand.
5. Larabee, J., Pellegrino, B., and Flick, B. (2005, January 12–14). Induction motor starting methods and issues. Proceedings of the Record of Conference Papers Industry Applications Society 52nd Annual Petroleum and Chemical Industry Conference, Denver, CO, USA.
6. Kitaneh, A., Jarrad, A., Alsadi, S., Zeidan, A., Foqha, T., AlWahhabi, A., and Attar, H. (2024). Educational Starting Board for Three-Phase Squirrel Cage Induction Motor. Intelligent Systems, Business, and Innovation Research, Springer Nature.10.1007/978-3-031-36895-0_56 ↗
7. Singh, I. (2024). Principles of Motor Starting, Pencil.
8. Small and Medium Enterprises (SMEs) facing an evolving technological era: A systematic literature review on the adoption of technologies in SMEs10.1108/EJIM-07-2021-0360 ↗
9. Umar, M.F., Akbar, M.N., and Kazmi, S.M.R. (2018, January 9–10). Design and simulation of a 3 phase induction motor drive based on indirect rotor field orientation using MATLAB Simulink tool. Proceedings of the 2018 1st International Conference on Power, Energy and Smart Grid (ICPESG), Mirpur Azad Kashmir, Pakistan.10.1109/ICPESG.2018.8384497 ↗
10. A novel efficiency improvement measure in three-phase in-duction motors, its conservation potential and economic analysis10.1016/S0973-0826(08)60431-7 ↗
11. Development of energy efficient drive for ventilation system using recurrent neural network10.1007/s00521-020-05615-x ↗
12. Le Roux, P.F., and Ngwenyama, M.K. (2022). Static and Dynamic simulation of an induction motor using Matlab/Simulink. Energies, 15.10.3390/en15103564 ↗
13. Benninger, M., and Liebschner, M. (2024). Optimization of Practicality for Modeling-and Machine Learning-Based Framework for Early Fault Detection of Induction Motors. Energies, 17.10.3390/en17153723 ↗
14. Benninger, M., Liebschner, M., and Kreischer, C. (2023). Fault detection of induction motors with combined modeling-and machine-learning-based framework. Energies, 16.10.3390/en16083429 ↗
15. Rodriguez-Blanco, M.A., Golikov, V., Vazquez-Avila, J.L., Samovarov, O., Sanchez-Lara, R., Osorio-Sánchez, R., and Pérez-Ramírez, A. (2022). Comprehensive and simplified fault diagnosis for three-phase induction motor using parity equation approach in stator current reference frame. Machines, 10.10.3390/machines10050379 ↗
16. Sardar, M.U., Vaimann, T., Kütt, L., Kallaste, A., Asad, B., Akbar, S., and Kudelina, K. (2023). Inverter-Fed Motor Drive System: A Systematic Analysis of Condition Monitoring and Practical Diagnostic Techniques. Energies, 16.10.3390/en16155628 ↗
17. Condition monitoring and fault diagnosis of induction motor10.1007/s42417-020-00253-y ↗
18. Motor Fault Diagnostics Based on Current Signatures: A Review
19. Pusca, R., Sbaa, S., Bessous, N., Romary, R., and Bousseksou, R. (2022). Mechanical failure detection in induction motors using stator current and stray flux analysis techniques. Eng. Proc., 14.10.3390/engproc2022014019 ↗
20. Filippetti, F., Bellini, A., and Capolino, G.A. (2013, January 11–12). Condition monitoring and diagnosis of rotor faults in induction machines: State of art and future perspectives. Proceedings of the 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), Paris, France.10.1109/WEMDCD.2013.6525180 ↗
21. Tang, J., Chen, J., Dong, K., Yang, Y., Lv, H., and Liu, Z. (2019). Modeling and evaluation of stator and rotor faults for induction motors. Energies, 13.10.3390/en13010133 ↗
22. Dehina, W., Boumehraz, M., and Kratz, F. (2021, January 22–25). Diagnosis and Detection of Rotor Bars Faults in Induction Motor Using HT and DWT Techniques. Proceedings of the 2021 18th International Multi-Conference on Systems, Signals & Devices (SSD), Monastir, Tunisia.10.1109/SSD52085.2021.9429381 ↗
23. Pietrzak, P., and Wolkiewicz, M. (2023). Fault diagnosis of PMSM stator winding based on continuous wavelet transform analysis of stator phase current signal and selected artificial intelligence techniques. Electronics, 12.10.3390/electronics12071543 ↗
24. Deep transfer learning-based broken rotor fault diagnosis for Induction Motors10.55525/tjst.1261887 ↗
25. Souza, M.V., Lima JC, O., Roque AM, P., and Riffel, D.B. (2021). A novel algorithm to detect broken bars in induction motors. Machines, 9.10.3390/machines9110250 ↗
26. Khan, M.A., Asad, B., Vaimann, T., and Kallaste, A. (2024). An Advanced Diagnostic Approach for Broken Rotor Bar Detection and Classification in DTC Controlled Induction Motors by Leveraging Dynamic SHAP Interaction Feature Selection (DSHAP-IFS) GBDT Methodology. Machines, 12.10.3390/machines12070495 ↗
27. Induction motor broken rotor bar fault diagnosis based on third-order energy operator demodulated current signal10.1109/TEC.2021.3121788 ↗
28. Hernandez-Ramirez, V., Almanza-Ojeda, D.L., Cardenas-Cornejo, J.J., Contreras-Hernandez, J.L., and Ibarra-Manzano, M.A. (2023). Detection of broken bars in induction motors using histogram analysis of current signals. Appl. Sci., 13.10.3390/app13148344 ↗
29. Chen, L., Shen, J., Xu, G., Chi, C., Feng, Q., Zhou, Y., Deng, Y., and Wen, H. (2023). Induction Motor Stator Winding Inter-Tern Short Circuit Fault Detection Based on Start-Up Current Envelope Energy. Sensors, 23.10.3390/s23208581 ↗
30. Improving the efficiency of induction motor drive by flux and torque control: A hybrid LSE-RERNN approach10.1016/j.isatra.2024.01.034 ↗
31. Aziz AG, M.A., Abdelaziz, A.Y., Ali, Z.M., and Diab, A.A.Z. (2023). A comprehensive examination of vector-controlled induction motor drive techniques. Energies, 16.10.3390/en16062854 ↗
32. Udomsuk, S., Areerak, K., Areerak, T., and Areerak, K. (2024). Online Estimation of Three-Phase Induction Motor Parameters Using an Extended Kalman Filter for Energy Saving. Energies, 17.10.3390/en17092115 ↗
33. Konda, Y.R., Ponnaganti, V.K., Reddy PV, S., Singh, R.R., Mercorelli, P., Gundabattini, E., and Solomon, D.G. (2024). Thermal Analysis and Cooling Strategies of High-Efficiency Three-Phase Squirrel-Cage Induction Motors—A Review. Computation, 12.10.3390/computation12010006 ↗
34. Yazdi, M. (2024). Maintenance strategies and optimization techniques. Advances in Computational Mathematics for Industrial System Reliability and Maintainability, Springer Nature.10.1007/978-3-031-53514-7_3 ↗
35. Low-inertia induction motors. Transactions of the American Institute of Electrical Engineers
36. Sen, P.C. (2021). Principles of Electric Machines and Power Electronics, International Adaptation, John Wiley & Sons.
37. Mathematical modelling of starting modes of induction motors with squirrel-cage rotor10.20998/2074-272X.2021.2.02 ↗
38. Belbali, A., Makhloufi, S., Kadri, A., Abdallah, L., and Seddik, Z. (2023). Mathematical Modeling of a Three-Phase Induction Motor. Induction Motors-Recent Advances, New Perspectives and Applications, Intech Open.10.5772/intechopen.1001587 ↗
39. DQ mathematical modelling and simulation of three-phase induction motor for electrical fault analysis10.17148/IARJSET.2020.7909 ↗
40. Parameter identification of induction machine with a starting no-load low-voltage test10.1109/TIE.2011.2148674 ↗
41. Melkebeek, A.J. (2018). Electrical Machines and Drives: Fundamentals and Advanced Modelling, Springer International Publishing.
42. D, Q reference frames for the simulation of induction motors10.1016/0378-7796(84)90030-0 ↗
43. Okpo, E.E., Le Roux, P.F., and Nnachi, A.F. (2023, January 15–17). Induction Motor Fault Identification using Support Vector Machine. Proceedings of the 2023 6th International Conference on Renewable Energy and Power Engineering (REPE), Beijing, China.10.1109/REPE59476.2023.10512245 ↗
44. Dq Modelling and Dynamic Characteristics of a Three-Phase Induction Machine
45. Vector-Based Magnetic Circuit Modelling of Induction Motors10.3390/magnetism2020010 ↗
46. Muchande, S., Kadam, A., Unni, K., and Thale, S. (2013, January 18–19). Design and implementation of a direct torque control space vector modulated three phase induction motor drive. Proceedings of the International Conference on Advances in Computing, Communication and Control, Mumbai India.10.1007/978-3-642-36321-4_61 ↗
47. Fachini, F., de Castro, M., Bogodorova, T., and Vanfretti, L. (2024). Modeling of Induction Motors and Variable Speed Drives for Multi-Domain System Simulations Using Modelica and the OpenIPSL Library. Electronics, 13.10.3390/electronics13091614 ↗
48. Oberkampf, W.L. (2019). Simulation accuracy, uncertainty, and predictive capability: A physical sciences perspective. Computer Simulation Validation: Fundamental Concepts, Methodological Frameworks, and Philosophical Perspectives, Springer.10.1007/978-3-319-70766-2_3 ↗
49. Kopylov, I.P. (2001). Mathematical Models of Electric Machines, Mir Publishers.
50. Boldea, I., and Nasar, S.A. (2002). The Induction Machine Handbook, CRC Press.
51. Vas, P. (1992). Electrical Machines and Drives: A Space-Vector Theory Approach, Oxford University Press.10.1093/oso/9780198593782.001.0001 ↗
52. Starting high-inertia loads10.1109/28.903136 ↗
53. Power electronics and motor drives recent progress and perspective10.1109/TIE.2008.2002726 ↗
54. Analysis of Electric Machinery and Drive Systems
55. Habyarimana, M., and Dorrell, D.G. (2017, January 21–22). Methods to reduce the starting current of an induction motor. Proceedings of the 2017 IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI), Chennai, India.10.1109/ICPCSI.2017.8392319 ↗
56. Novel Analytical Approaches for Induction Machine Direct Start-up Speed–Time Curve Modeling under Fan Load10.1007/s00202-023-02039-3 ↗
57. Kasatkin, A.S., and Nemtsov, M.V. (2008). Elektrotekhnika [Electrical Engineering], Academia Publishing.
58. Sobolevskaya, A.E., Shlaf, M.M., Afonin, V.I., and Sobolevskaya, E.A. (1982). Asynchronous Motors of the 4A Series: Handbook, Energoizdat.
59. Postnikov, I.M. (1966). Obshchaya Teoriya i Perekhodnye Protsessy Elektricheskikh Mashin [General Theory and Transients of Electrical Machines], Tekhnika.
60. Menghal, P.M., and Laxmi, A.J. (2014, January 27–29). Dynamic modeling, simulation & analysis of induction motor drives. Proceedings of the 2014 International Conference on Science Engineering and Management Research (ICSEMR), Chennai, India.10.1109/ICSEMR.2014.7043553 ↗