journal article·2023-12-13Open access

Effect of Finely Ground Coal Bottom Ash as Replacement for Portland Cement on the Properties of Ordinary Concrete

Chun-Wei Chuang, Tai-An Chen, Ran Huang

Applied Sciences· Volume 13· Issue 24

Abstract

This study investigates the use of finely ground coal bottom ash (FGCBA) as a substitute for Portland cement in concrete, comparing it with coal fly ash from the same power plant. The incorporation of this ash necessitates the addition of a superplasticizer to achieve the desired slump at the same replacement rate. The results demonstrate that at an optimal 20% replacement rate, as determined by 91-day compressive strength tests, the maximum strength achieved by FGCBA is 97.7% of the control group with pure cement, whereas coal fly ash reaches 114.0%. Drying shrinkage tests indicate for both materials have similar volume stability, while rapid chloride permeability tests show their effectiveness in reducing chloride ion permeability, with superior performance from FGCBA. Under optimal conditions, the result of the RCPT test was only 559 coulombs, which is significantly better compared to the 4108 coulombs when using fly ash from coal combustion. Our results demonstrate that utilizing low-cost bottom ash by finely grinding it to replace Portland cement in concrete is feasible, achieving both carbon reduction and economic viability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Coal and Its By-products

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Harbor and River Engineering, National Taiwan Ocean University, Keelung City 202, Taiwan

Astray Limited Company, Taipei City 105, Taiwan

Funding

Ministry of Science and Technology, Taiwan, ROC

References (36)

Show source-provided references
1. Carbon emission and mitigation cost comparisons between fossil fuel, nuclear and renewable energy resources for electricity generation10.1016/S0301-4215(02)00192-1 ↗
2. Reducing wind power curtailment in China: Comparing the roles of coal power flexibility and improved dispatch10.1080/14693062.2018.1546164 ↗
3. Lin, C.-Y., and Chen, T.-A. (2022). Effects of composition type and activator on fly ash-based alkali activated materials. Polymers, 14.10.3390/polym14010063 ↗
4. Carbon capture and storage (CCS): The way forward10.1039/C7EE02342A ↗
5. Aragonite formation induced by triethylene glycol and its enhancement to flexural strength in carbonated rankinite cement10.1016/j.conbuildmat.2023.133514 ↗
6. Technical and environmental performance of lower carbon footprint cement mortars containing biomass fly ash as a secondary cementitious material10.1016/j.resconrec.2018.03.004 ↗
7. Long-term performance of high-volume fly ash
8. Toxicity and environmental and economic performance of fly ash and recycled concrete aggregates use in concrete: A review10.1016/j.heliyon.2018.e00611 ↗
9. Strength activity and microstructure of blended ultra-fine coal bottom ash-cement mortar10.1016/j.conbuildmat.2017.07.088 ↗
10. Mansor, S., Haron, S., Joohari, M.I., Razali, M., and Ramli, R. (2020, January 1–2). The effect of utilizing fly ash and bottom ash as a replacement of mineral filler in porous asphalt mixtures. Proceedings of the IOP Conference Series: Materials Science and Engineering, Batu Pahat, Malaysia.10.1088/1757-899X/1144/1/012086 ↗
11. Microstructural characteristics and carbonation resistance of coal bottom ash based concrete mixtures
12. Influence of ground coal bottom ash on the properties of concrete
13. Short-term effects of sulphate and chloride on the concrete containing coal bottom ash as supplementary cementitious material
14. Influence of bottom ash as a sand replacement material on durability of self-compacting concrete exposed to seawater
15. Reactivity of ground coal bottom ash to be used in Portland cement
16. Kamal, N.L.M., Shafiq, N., Alaloul, W.S., Beddu, S., and Abd Manan, T.S.B. (2021, January 13–15). Application of response surface methodology for the optimization of mix design concrete using coal bottom ash as cement replacement material. Proceedings of the International Conference on Civil, Offshore and Environmental Engineering, Kuching, Malaysia.10.1007/978-981-33-6311-3_45 ↗
17. Evaluation of compressive strength and resistance of chloride ingress of concrete using a novel binder from ground coal bottom ash and ground calcium carbide residue10.1016/j.conbuildmat.2019.04.145 ↗
18. Use of ground coal bottom ash as cement constituent in concretes exposed to chloride environments10.1016/j.jclepro.2017.09.117 ↗
19. Fresh and hardened properties of ultra-high performance concrete incorporating coal bottom ash and slag powder10.1016/j.conbuildmat.2016.10.109 ↗
20. Utilization of sieved and ground coal bottom ash powders as a coarse binder in high-strength mortar to improve workability10.1016/j.conbuildmat.2015.05.017 ↗
21. (2023). Standard Practice for Making and Curing Concrete Test Specimens in the Field (Standard No. ASTM C31-23).
22. (2023). Standard Specification for Ready-Mixed Concrete (Standard No. ASTM C94-23).
23. (2021). Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete (Standard No. ASTM C311-21).
24. (2020). Standard Test Method for Slump of Hydraulic-Cement Concrete (Standard No. ASTM C143-20).
25. (2023). Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete (Standard No. ASTM C138-23).
26. (2023). Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance (Standard No. ASTM C403-23).
27. (2021). Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens (Standard No. ASTM C39-21).
28. (2017). Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete (Standard No. ASTM C157-17).
29. (2022). Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration (Standard No. ASTM C1202-22e1).
30. (2021). Standard Test Method for Density, Absorption, and Voids in Hardened Concrete (Standard No. ASTM C642-21).
31. (2023). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Standard No. ASTM C618-23e1).
32. Influence of milling parameters on the properties of ground coal bottom ash and its blended cement10.1016/j.conbuildmat.2022.129745 ↗
33. Sustainable application of coal bottom ash as fine aggregates in concrete: A comprehensive review
34. Recycled coal bottom ash as sustainable materials for cement replacement in cementitious Composites: A review10.1016/j.conbuildmat.2022.127624 ↗
35. Analysis of compressive strength development of concrete containing high volume fly ash10.1016/j.conbuildmat.2015.08.099 ↗
36. Reviewing the role of coal bottom ash as an alternative of cement10.1016/j.conbuildmat.2019.117276 ↗