Conditions Influencing Mould Growth for Effective Prevention of Wood Deterioration Indoors
Source abstract
Abstract
Effective prevention of mould growth indoors is still an important topic considering that mould growth is frequently observed in buildings, it causes serious health hazards and can irreversibly damage infected objects. Several studies have been conducted and mould growth models developed. Despite that, some potentially important aspects such as water damage and spore contamination have received only little attention. The objective of the present study was to investigate the effect of the initial moisture content of wood and spore contamination on mould development indoors. The mould tests were performed in constant temperature (10, 20 and 30 °C) and relative humidity (91% and 97%) conditions. The results show that wetting of wood specimens prior to the test significantly accelerates mould growth at a temperature of 10 °C. For the other temperatures, the effect was insignificant. Similar results were obtained for the test involving dry (conditioned at RH 50%) and conditioned specimens (RH 91% or RH 97%). The results regarding initial spore contamination show that significantly longer periods are required for mould to develop without spore contamination at 10 °C and 20 °C, while at 30 °C the effect is relatively small.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Building materials and conservation · Conservation Techniques and Studies · Hygrothermal properties of building materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Latvian State Institute of Wood Chemistry, Dzerbenes iela 27, LV-1006 Riga, Latvia
References (58)
Show source-provided references
1. Mould growth criteria and design avoidance approaches in wood-based ma-terials—A systematic review10.1016/j.conbuildmat.2017.05.204 ↗
2. Heseltine, E., and Rosen, J. (2009). WHO Guidelines for Indoor Air Quality: Dampness and Mould.
3. Mould growth on building materials under low water activities. Influence of humidity and temperature on fungal growth and secondary metabolism10.1016/j.ibiod.2004.05.002 ↗
4. Mould in buildings: The air spora of domestic dwellings10.1016/0265-3036(88)90052-8 ↗
5. Occurrence and moisture requirements of microbial growth in building materials10.1016/0964-8305(92)90033-K ↗
6. Associations between fungal species and wa-ter-damaged building materials10.1128/AEM.02513-10 ↗
7. Minimum conditions for visible mold growth
8. Mycotoxin production by indoor molds10.1016/S1087-1845(03)00026-4 ↗
9. Guild, S., and MacDonald, M. (2004). Mould Prevention and Collection Recovery: Guidelines for Heritage Collections—Technical Bulletin 26, Canadian Conservation Institute.
10. Fungi: Their role in deterioration of cultural heritage10.1016/j.fbr.2010.03.003 ↗
11. Experimental investigation of the humidity effect on wood discoloration by selected mold and stain fungi for a proper conservation of wooden cultural heritages10.1186/s10086-020-01878-z ↗
12. Broda, M. (2020). Natural Compounds for Wood Protection against Fungi—A Review. Molecules, 25.10.3390/molecules25153538 ↗
13. Adan, O.C.G., and Samson, R.A. (2011). Fundamentals of Mold Growth in Indoor Environments and Strategies for Healthy Living, Wageningen Academic Publishers.10.3920/978-90-8686-722-6 ↗
14. Evaluation of the association between natural mold resistance and chemical components of nine wood species10.15376/biores.13.3.6524-6541 ↗
15. Variation in mold susceptibility among hardwood species under laboratory conditions10.1016/j.ibiod.2020.105082 ↗
16. Wood-water relationships and their role for wood susceptibility to fungal decay10.1007/s00253-020-10479-1 ↗
17. Heartwood formation and natural durability—A review
18. Surface mould growth on five modified wood substrates coated with three different coating systems when exposed outdoors10.1016/j.ibiod.2008.03.004 ↗
19. Resistance of different wood-based materials against mould fungi: A comparison of methods10.1007/s00107-020-01554-5 ↗
20. Heat Modification of Wood: Chemical Properties and Resistance to Mold and Decay Fungi
21. Kamperidou, V. (2019). The Biological Durability of Thermally- and Chemically-Modified Black Pine and Poplar Wood Against Basidiomycetes and Mold Action. Forests, 10.10.3390/f10121111 ↗
22. A study of thermo-hydro-treated (THT) birch wood by chemical analysis and Py-GC/MS10.1515/hf-2018-0169 ↗
23. IEA Annex 14: Condensation and Energy10.1177/109719639201500307 ↗
24. A mathematical model of mould growth on wooden material10.1007/s002260050131 ↗
25. Surface mould growth on wood: A comparison of laboratory screening tests and outdoor performance10.1007/s00107-019-01444-5 ↗
26. Yang, C.S., and Heinsohn, P.A. (2007). Wood in the built environment—conditions for mold and decay. Sampling and Analysis of Indoor Microorganisms, John Wiley & Sons, Inc.10.1002/0470112433 ↗
27. Ferdyn-Grygierek, J., Kaczmarczyk, J., Blaszczok, M., Lubina, P., Koper, P., and Bulińska, A. (2020). Hygrothermal Risk in Museum Buildings Located in Moderate Climate. Energies, 13.10.3390/en13020344 ↗
28. Climate risk assessment in museums: Degradation risks determined from temperature and relative humidity data
29. Review of museums’ indoor environment conditions studies and guidelines and their impact on the museums’ artifacts and energy consumption10.1016/j.buildenv.2018.07.012 ↗
30. The effects of moisture and temperature on growth and spore germination in some fungi10.1016/0022-474X(69)90055-1 ↗
31. Modelling the Time Factor in the Development of Mould Fungi—The Effect of Critical Humidity and Temperature Conditions on Pine and Spruce Sapwood10.1515/hfsg.1997.51.1.6 ↗
32. Sedlbauer, K. (2001). Prediction of Mould Fungus Formation on the Surface of/and inside Building Components. [Ph.D. Thesis, Universi-tät Stuttgart].
33. Conditions for mould growth on typical interior surfaces10.1016/j.egypro.2017.09.680 ↗
34. Mould growth on kiln-dried and air-dried timber10.1007/s00107-013-0699-y ↗
35. Hyperspectral Imaging Surface Analysis for Dried and Thermally Modified Wood: An Exploratory Study10.1155/2018/7423501 ↗
36. Development of a new rapid method for mould testing in a climate chamber: Preliminary tests10.1007/s00107-013-0697-0 ↗
37. Effect of External and Internal Factors on the Germination of Fungous Spores10.2307/2480384 ↗
38. Prevention of Mold Growth and Toxin Production through Control of Environmental Condi-tions10.4315/0362-028X-45.6.519 ↗
39. Water uptake by scots pine sapwood, and its restriction by the use of water repellents10.1007/BF00351073 ↗
40. Liquid water absorption in dried Norway spruce timber measured with CT scanning and viewed as a percolation process10.1007/s00226-010-0371-1 ↗
41. Comparison of the absorption and desorption of water betweenscots pine and spruce after submersion in water10.1515/hfsg.1993.47.4.271 ↗
42. Moisture transport in coated wood. Part 1: Analysis of sorption rates and moisture content profiles in spruce during liquid water uptake10.1007/s001070050445 ↗
43. The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170 °C, 190 °C, 210 °C and 230 °C10.1007/s00107-005-0063-y ↗
44. Modelling water absorption in wood10.1080/17480270902781576 ↗
45. Liquid penetration in different cells of two hardwood species10.1007/s10086-010-1168-4 ↗
46. Visualization and quantification of liquid water transport in softwood by means of neutron radiography10.1016/j.ijheatmasstransfer.2012.06.045 ↗
47. Bound and free water distribution in wood during water uptake and drying as measured by 1D magnetic resonance imaging10.1007/s10570-016-1173-x ↗
48. Antons, A., Cirule, D., Verovkins, A., and Kuka, E. (2018, January 16–18). Effect of thermal treatment on physical and mechanical properties of birch and pine wood. Proceedings of the Research for Rural Development, 24th Annual International Scientific Conference on Research for Rural Development, Jelgava, Latvia.10.22616/rrd.24.2018.012 ↗
49. Thermally modified birch wood interaction with liquids
50. Weathering properties of wood-plastic composites based on heat-treated wood and polypropylene10.1016/j.compositesa.2020.106102 ↗
51. Process of absorption and desorption of water in a wood board, with 3-dimensional transport beyond the FSP10.1007/BF00200166 ↗
52. An Investigation of the Drying Rate of Water in Wood at Different Relative Humidities Studied by Time Domain Nuclear Magnetic Resonance10.15376/biores.12.2.2991-3000 ↗
53. A critical discussion of the physics of wood–water interactions10.1007/s00226-012-0514-7 ↗
54. The water vapour sorption properties of Sitka spruce determined using a dynamic vapour sorption apparatus10.1007/s00226-010-0305-y ↗
55. Laboratory study to determine the critical moisture level for mould growth on building materials10.1016/j.ibiod.2012.05.014 ↗
56. A method for early de-tection and identification of fungal contamination of building materials using e-nose10.1371/journal.pone.0215179 ↗
57. Towards a more thoughtful use of mould prediction models: A critical view on experimental mould growth research10.1177/1744259115588718 ↗
58. Thybring, E.E., Glass, S.V., and Zelinka, S.L. (2019). Kinetics of water vapor sorption in wood cell walls: State of the art and research needs. Forests, 10.10.3390/f10080704 ↗