journal article·2024-11-26Open access

Energy-Efficient Adaptive Dynamic Building Facades: A Review of Their Energy Efficiency and Operating Loads

Nurlan Zhangabay, Timur Tursunkululy, Ulzhan Ibraimova, Uliya Abdikerova

Applied Sciences· Volume 14· Issue 23

Abstract

Energy-efficient, adaptive, affordable and durable curtain wall systems have always attracted great interest among the scientific and technical communities. In this regard, the purpose of this work was to conduct a comprehensive review of the issues related to energy-efficient adaptive dynamic facades, taking into account their operating loads, revealing the diversity of the studies conducted in this area. The review of the literature was carried out in three stages. For all stages, the review period was 2001–2024. In the first stage, a review of traditional curtain facade systems was conducted, which emphasized the relevance of this area, identifying a total of 4338 sources. In the second stage, a review of specific issues, such as adaptive dynamic facade systems, yielded 2838 sources, from which the 87 most suitable sources were selected. In the third stage, a review focusing on the issue of operating loads yielded 741 works, from which 43 suitable sources were selected. At the same time, pie charts reflecting the most active international scientific journals were compiled for each area. The conducted review of energy-efficient adaptive dynamic building facades, taking into account their operating loads, could provide significant assistance in further research on the specified issues. As researchers mainly focus on environmental friendliness and cost-effectiveness, they often neglect issues such as the systems’ resistance to operating loads, which represents a serious deficiency. In this regard, this review identified a gap in the research on the development of energy-efficient facades with an air layer; on this basis, the further development of adaptive facade systems is required. The review of the selected studies also showed that issues related to energy efficiency and sustainability, taking into account operational loads, have not been addressed in combination; rather, they have only been addressed individually. At the same time, this review shows that the proposed development of an adaptive system of external fencing could be relevant, both nationally and internationally, depending on the natural and climatic conditions of the territory for which the buildings are designed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Engineering and Vibration Analysis · Building Energy and Comfort Optimization · Wind and Air Flow Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Architecture and Urban Planning, M. Auezov South Kazakhstan University, Tauke Khan Av., 5, Shymkent 160012, Kazakhstan

Department of Architecture and Construction Production, Korkyt Ata Kyzylorda University, Saparbayevav, 15, Kyzylorda 120018, Kazakhstan

Funding

Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

References (100+)

Show source-provided references
1. Dynamic façades in buildings: A systematic review across thermal comfort, energy efficiency and daylight performance10.1016/j.rser.2024.114474 ↗
2. Economically feasible energy refurbishment of prefabricated building in Belgrade, Serbia10.1016/j.enbuild.2014.10.041 ↗
3. Evaluating the Effectiveness of Energy-Saving Retrofit Strategies for Residential Buildings
4. eREN energetic refurbishment—A global approach for the building envelope10.1016/j.egypro.2017.07.384 ↗
5. (2024, October 22). Code of Rules of the Republic of Kazakhstan 2.04-107-2022. Building Heat Engineering: State Standards in the Field of Architecture, Urban Planning and Construction. Code of Rules of the Republic of Kazakhstan.—JSC “KazNIISA”, LLP “Astana Stroy-Consulting”, 2013. Approved and Enacted on 1 July 2015. 80. Available online: https://online.zakon.kz/Document/?doc_id=39838250.
6. (2024, October 15). Code of Rules of the Republic of Kazakhstan 2.04-01-2017. Building Climatology: State Standards in the Field of Architecture, Urban Planning and Construction. Code of Rules of the Republic of Kazakhstan.—JSC “KazNIISA”, LLP “Astana Stroy-Consulting”, 2017. Approved and Enacted on 20 December 2017. 43p. Available online: https://gos24.kz/uploads/documents/2022-12/sp-rk-2.04-01-2017-stroitelnaya-klimatologiya.pdf.
7. (2024, October 16). Code of Rules of the Republic of Kazakhstan 2.03-30-2017. Building in seismic zones: State Standards in the Field of Architecture, Urban Planning and Construction. Code of Rules of the Republic of Kazakhstan.—JSC “KazNIISA”, LLP “Astana Stroy-Consulting”, 2017. Approved and Enacted on 20 December 2017. 109p. Available online: https://online.zakon.kz/Document/?doc_id=36128461.
8. Analysis of thermal efficiency of external fencing made of innovative ceramic blocks
9. Analysis of the effect of porosity on thermal conductivity with consideration of the internal structure of arbolite
10. Field thermovision study of external enclosure for multi-storey residential building under climatic conditions of Northern Kazakhstan
11. Thermovision study of a residential building under climatic conditions of South Kazakhstan in a cold period
12. Rakhimova, G., Zhangabay, N., Samoilova, T., Rakhimov, M., Kropachev, P., Stanevich, V., Karacasu, M., and Ibraimova, U. (2024). Computational Research of the Efficiency of Using a Three-Layer Panel Made of Highly Porous Polystyrene Concrete. Materials, 17.10.3390/ma17164133 ↗
13. O’Brien, A.M., and Mc Guckin, C. (2016). The Systematic Literature Review Method: Trials and Tribulations of Electronic Database Searching at Doctoral Level. SAGE Research Methods Cases, SAGE Publishing Ltd.10.4135/978144627305015595381 ↗
14. Scoping Studies: Towards a Methodological Framework10.1080/1364557032000119616 ↗
15. Factors affecting extended avalanche destructions on long-distance gas pipe lines: Review
16. Construction and climatic certification of an area as a prerequisite for development of energy-efficient buildings and their external wall constructions
17. (2024, November 14). Available online:. https://www.kazhydromet.kz/ru/.
18. (2024, October 17). Available online:. https://www.alt-msk.ru.
19. Modern tendencies in the design of buildings using facing facade materials
20. The influence of climatic conditions on the design of facades
21. Zhangabay, N., Tagybayev, A., Baidilla, I., Sapargaliyeva, B., Shakeshev, B., Baibolov, K., Duissenbekov, B., Utelbayeva, A., Kolesnikov, A., and Izbassar, A. (2023). Multilayer External Enclosing Wall Structures with Air Gaps or Channels. J. Compos. Sci., 7.10.3390/jcs7050195 ↗
22. Energy performance of Double-Skin Façades in temperate climates: A systematic review and meta-analysis10.1016/j.rser.2015.10.075 ↗
23. Controlling naturally ventilated double-skin façade to reduce energy consumption in buildings10.1016/j.rser.2024.114649 ↗
24. Holistic overview of natural ventilation and mixed mode in built environment of warm climate zones and hot seasons10.1016/j.buildenv.2023.110942 ↗
25. A review of the influence of courtyard geometry and orientation on microclimate10.1016/j.buildenv.2023.110269 ↗
26. Green building technologies in Southeast Asia: A review
27. A review of research on self-shading façades in warm climates10.1016/j.enbuild.2024.114203 ↗
28. Field thermal imaging surveys of residential buildings—A prereq-uisite for the development of energy-efficient external enclosures
29. Influence of thermal insulation position in building envelope on the space cooling of high-rise residential buildings in Hong Kong10.1016/S0378-7788(00)00125-0 ↗
30. A simple model to study ventilated facades energy performance10.1016/S0378-7788(01)00130-X ↗
31. A prediction tool for the temperature field of double facades10.1016/S0378-7788(02)00065-8 ↗
32. Useful solar heat gains in multi-zone non-domestic buildings as a function of orientation and thermal time constant10.1016/S0960-1481(01)00163-X ↗
33. Thermal modelling of a building with an integrated ventilated PV façade10.1016/S0378-7788(02)00168-8 ↗
34. Building-integrated photovoltaic and thermal applications in a subtropical hotel building10.1016/S1359-4311(03)00183-2 ↗
35. Experimental work on a linked, dynamic and ventilated, wall component10.1016/j.enbuild.2004.01.048 ↗
36. Natural ventilation in high-rise buildings with double facades, saving or waste of energy10.1016/j.enbuild.2004.01.018 ↗
37. Cooling load prediction for buildings using general regression neural networks10.1016/j.enconman.2003.10.009 ↗
38. Three-dimensional simulation with a CFD tool of the airflow phenomena in single floor double-skin facade equipped with a venetian blind10.1016/j.solener.2004.09.016 ↗
39. Thermal simulation of buildings with double-skin façades10.1016/j.enbuild.2005.06.014 ↗
40. Solar control with thermotropic layers10.1016/j.solener.2004.12.009 ↗
41. The use of a heavy internal wall with a ventilated air gap to store solar energy and improve summer comfort in timber frame houses10.1016/j.enbuild.2005.06.010 ↗
42. Calculation of wind-driven cross ventilation in buildings with large openings10.1016/j.jweia.2006.04.002 ↗
43. Investigations into the functioning of a supply air window in relation to solar energy as determined by experiment and simulation10.1016/j.solener.2005.04.016 ↗
44. Facade design optimization for naturally ventilated residential buildings in Singapore10.1016/j.enbuild.2006.10.011 ↗
45. A study of the effectiveness of passive climate control in naturally ventilated residential buildings in Singapore10.1016/j.buildenv.2005.11.032 ↗
46. The impacts of ventilation strategies and facade on indoor thermal environment for naturally ventilated residential buildings in Singapore10.1016/j.buildenv.2006.06.027 ↗
47. A new type of double-skin façade configuration for the hot and humid climate10.1016/j.enbuild.2008.04.014 ↗
48. Simulation support for performance assessment of building components10.1016/j.buildenv.2006.10.051 ↗
49. An innovation wall model based on interlayer ventilation10.1016/j.enconman.2007.08.011 ↗
50. Energy conservation in honey storage building using Trombe wall10.1016/j.enbuild.2008.02.019 ↗
51. A more sustainable curtain wall system: Analytical modeling of the solar dynamic buffer zone (SDBZ) curtain wall10.1016/j.buildenv.2008.01.006 ↗
52. Dynamic characteristics and energy performance of buildings using phase change materials: A review10.1016/j.enconman.2009.08.019 ↗
53. Experimental investigation of PCM cold storage10.1016/j.enbuild.2008.10.008 ↗
54. Double skin façades for warm climate regions: Analysis of a solution with an integrated movable shading system10.1016/j.buildenv.2008.08.005 ↗
55. Indoor thermal environmental conditions near glazed facades with shading devices—Part II: Thermal comfort simulation and impact of glazing and shading properties10.1016/j.buildenv.2010.05.013 ↗
56. The effect of the orientation and proportion of a plant-covered wall layer on the thermal performance of a building zone10.1016/j.buildenv.2009.11.013 ↗
57. Vacuum insulation panels for building applications: A review and beyond10.1016/j.enbuild.2009.09.005 ↗
58. Thermal performance evaluation of a low-cost housing prototype made with plywood panels in Southern Brazil10.1016/j.apenergy.2009.06.038 ↗
59. Empirical validation and modelling of a naturally ventilated rainscreen façade building10.1016/j.enbuild.2010.12.005 ↗
60. Energy performance of an open-joint ventilated façade compared with a conventional sealed cavity façade10.1016/j.solener.2011.04.028 ↗
61. Development and experimental validation of a simulation model for open joint ventilated façades10.1016/j.enbuild.2011.09.005 ↗
62. Airflow assessment in cross-ventilated buildings with operable façade elements10.1016/j.buildenv.2010.07.022 ↗
63. Energy evaluation of a horizontal open joint ventilated façade10.1016/j.applthermaleng.2011.11.034 ↗
64. The drying out capacity of a ventilated internal cavity with a heating cable, analytical model and empirical verification10.1016/j.buildenv.2011.12.012 ↗
65. Design and construction recommendations for brick enclosures with continuous air chamber10.1016/j.conbuildmat.2012.04.128 ↗
66. Ventilated active façades with PCM10.1016/j.apenergy.2013.01.032 ↗
67. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency10.1016/j.enbuild.2012.12.042 ↗
68. Building integration of PCM for natural cooling of buildings10.1016/j.apenergy.2013.01.080 ↗
69. A comparative study of the CFD modeling of a ventilated active façade including phase change materials10.1016/j.apenergy.2014.03.080 ↗
70. Retrofitting of a listed brick and wood building using vacuum insulation panels on the exterior of the facade: Measurements and simulations10.1016/j.enbuild.2014.01.019 ↗
71. Experimental assessment of a zinc-titanium ventilated façade in a Mediterranean climate10.1016/j.enbuild.2013.11.043 ↗
72. Relationship between fracture toughness and porosity of clay brick panels used in ventilated façades: Initial investigation10.1016/j.engfracmech.2013.12.003 ↗
73. The facade system with ventilated channels for thermal insulation of newly constructed and renovated buildings10.1016/j.enbuild.2014.02.003 ↗
74. Evaluation of the Effect of the Different Distances between Two Facades Natural Ventilation on Atrium Buildings with DSF and PMV-PPD Comfort10.1016/j.proeng.2015.08.1064 ↗
75. Thermal comfort in naturally ventilated buildings with double skin façade under tropical climate conditions: The influence of key design parameters10.1016/j.enbuild.2015.10.029 ↗
76. Experimental research of the thermal characteristics of a multi-storey naturally ventilated double skin façade10.1016/j.enbuild.2014.11.007 ↗
77. Thermodynamic analysis of ventilated façades under different wind conditions in summer period10.1016/j.enbuild.2016.04.035 ↗
78. A Novel Integrated Building Energy System for High Performance Façade10.1016/j.egypro.2016.06.260 ↗
79. Defining Issue of Thermal Comfort Control through Urban Mosque Façade Design10.1016/j.sbspro.2016.10.259 ↗
80. Experimental validation of a numerical model for ventilated wall cavity with spray evaporative cooling systems for hot and dry climates10.1016/j.enbuild.2016.09.035 ↗
81. Numerical modeling of ventilated wall cavities with spray evaporative cooling system10.1016/j.enbuild.2016.08.046 ↗
82. Ventilated Façade with double chamber and flow control device10.1016/j.enbuild.2017.04.063 ↗
83. Ventilated Facades: Requirements and Specifications Across Europe10.1016/j.proenv.2017.03.096 ↗
84. Simulation study of an innovative ventilated facade utilizing indoor exhaust air10.1016/j.egypro.2017.08.009 ↗
85. Qualitative analysis of promising materials and technologies for the design and evaluation of Climate Adaptive Opaque Façades10.1016/j.buildenv.2018.08.028 ↗
86. Solar facade module for nearly zero energy building10.1016/j.energy.2018.04.167 ↗
87. Indoor daylight distribution in a room with integrated dynamic solar concentrating facade10.1016/j.enbuild.2017.10.008 ↗
88. Mechanical characteristics, as well as physical-and-chemical properties of the slag-filled concretes, and investigation of the predictive power of the metaheuristic approach
89. Assessment of the influence of façade location and orientation in indoor environment of double-skin building envelopes with perforated metal sheets10.1016/j.buildenv.2019.106325 ↗
90. Optimizing energy performance of a ventilated composite Trombe wall in an office building10.1016/j.renene.2018.09.059 ↗
91. Thermal and energy performance investigation of a smart double skin facade integrating vanadium dioxide through CFD simulations10.1016/j.enconman.2019.04.070 ↗
92. Thermally responsive coating on building heating and cooling energy efficiency and indoor comfort improvement10.1016/j.apenergy.2019.113506 ↗
93. Improving residential building efficiency with membranes over façades: The Mediterranean context10.1016/j.jobe.2020.101421 ↗
94. Garrecht Perspectives of naturally ventilated buildings: A review10.1016/j.rser.2020.109933 ↗
95. Impacts of façade openings’ geometry on natural ventilation and occupants’ perception: A review10.1016/j.buildenv.2019.106613 ↗
96. Automated adaptive façade functions in practice—Case studies on office buildings10.1016/j.autcon.2020.103113 ↗
97. Auto-responsive technologies for thermal renovation of opaque facades10.1016/j.enbuild.2020.109968 ↗
98. Experimental studies of the thermo and humidity state of a new building facade insulation system based on panels with ventilated channels10.1016/j.enbuild.2019.109607 ↗
99. Analysis of the energy performance of an Opaque Ventilated Façade under winter and summer weather conditions10.1016/j.solener.2020.05.078 ↗
100. Modeling heat and moisture transfer of building facades thermally insulated by the panels with ventilated channels10.1016/j.jobe.2021.102391 ↗