journal article·2012-09

Si3N4/TiN composites produced from TiO2-Modified Si3N4 powders

Yu. F. Kargin, S. N. Ivicheva, A. S. Lysenkov, N. A. Ovsyannikov, L. I. Shvorneva, K. A. Solntsev

Inorganic Materials· Volume 48· Issue 9
Publisher page

Abstract

Si3N4/TiN composites have been produced by hot pressing at temperatures from 1600 to 1800°C in a nitrogen atmosphere, using silicon nitride powders prepared by self-propagating high-temperature synthesis and surface-modified with titanium dioxide nanoparticles. We examined the effect of TiO2 content on the microstructure, phase composition, and mechanical strength of the ceramics. It is shown that titanium nitride can be formed by the reaction Si3N4 + TiO2 → TiN + NO + N2O + 3Si. The Si3N4/TiN composites containing 5–20% TiN have a low density, high porosity, and a bending strength of 60 MPa or lower. In Si3N4/TiN ceramics produced using calcium aluminates as sintering aids, the silicon nitride grains are densely packed, which ensures an increase in strength to 650 MPa.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Bellosi, A., Guicciardi, S., and Tampieri, A., Development and Characterization of Electroconductive Si3N4-TiN Composite, J. Eur. Ceram. Soc., 1992, vol. 9, no. 2, pp. 83–93.10.1016/0955-2219(92)90049-J ↗
2. Bracisiewicz, M., Medri, V., and Bellosi, A., Factors Inducing Degradation of Properties after Long Term Oxidation of Si3N4-TiN Electroconductive Composites, Appl. Surf. Sci., 2002, vol. 202, nos. 3–4, pp. 139–149.10.1016/S0169-4332(02)00498-1 ↗
3. Zivkovic, Lj., Nikolic, Z., Boskovic, S., and Miljkovic, M., Microstructural Characterization and Computer Simulation of Conductivity in Si3N4-TiN Composites, J. Alloys Compd., 2004, vol. 373, nos. 1–2, pp. 231–236.10.1016/j.jallcom.2003.10.036 ↗
4. Martin, C., Cales, B., Vivier, P., and Mathieu, P., Electrical Discharge Machinable Ceramic Composites, Mater. Sci. Eng., A, 1989, vol. 109, pp. 351–356.10.1016/0921-5093(89)90614-X ↗
5. Urbanovich, V.S., Chuevskii, A.V., Vlajic, M., et al., X-Ray Diffraction Characterization of Silicon Nitride-Titanium Nitride Composites Sintered at High Pressures, in Sbornik dokladov FTTP-2005 (Proc. FTTP-2005), Minsk: Belarussk. Akad. Nauk, 2005, pp. 454–456.
6. Shuichi Kawano, Kenichi Tsukurimichi, Junichi Takahashi, and Shiro Shimada, Preparation of Nano-Sized TiN Coated α-Si3N4 Particles, J. Mater. Chem., 2001, vol. 11, no. 10, pp. 2625–2628.10.1039/b102794h ↗
7. Shuichi Kawano, Junichi Takahashi, and Shiro Shimada, Highly Electroconductive TiN/Si3N4 Composite Ceramics Fabricated by Spark Plasma Sintering of Si3N4 Particles with a Nano-Sized TiN Coating, J. Mater. Chem., 2002, vol. 12, no. 2, pp. 361–365.10.1039/b107058b ↗
8. Zheng, S., Gao, L., Watanabe, H., and Meguro, T., Improving the Microstructure of Si3N4-TiN Composites Using Various PEIs to Disperse Raw TiO2 Powder, Ceram. Int., 2007, vol. 33, no. 3, pp. 355–359.10.1016/j.ceramint.2005.10.003 ↗
9. Duan, R.-G., Roebben, G., and Van der Biest, O., TiO2 Additives for In Situ Formation of Toughened Silicon Nitride-Based Composites, Mater. Lett., 2003, vol. 57, nos. 26–27, pp. 4156–4161.10.1016/S0167-577X(03)00282-9 ↗
10. Duan, R.-G., Roebben, G., and Vleugels, J., Effect of TiX (X = C, N, O) Additives on Microstructure and Properties of Silicon Nitride Based Ceramics, Scr. Mater., 2005, vol. 53, no. 6, pp. 669–673.10.1016/j.scriptamat.2005.05.024 ↗
11. Krnel, K., Maglica, A., and Kosma, T., β-SiA-lON/TiN Nanocomposites Prepared from TiO2-Coated Si3N4 Powder, J. Eur. Ceram. Soc., 2008, vol. 28, no. 5, pp. 953–957.10.1016/j.jeurceramsoc.2007.09.021 ↗
12. Maglica, A., Krnel, K., and Kosmac, T., Preparation of Si3N4-TiN Ceramic Composites, Mater. Technol., 2010, vol. 44, no. 1, pp. 31–35.
13. Shuichi Kawano, Junichi Takahashi, and Shiro Shimada, Spark Plasma Sintering of Nano-Sized TiN Prepared from TiO2 by Controlled Hydrolysis of TiCl4 and Ti(O-i-C3H7)4 Solution, J. Am. Ceram. Soc., 2003, vol. 86, no. 9, pp. 1609–1611.10.1111/j.1151-2916.2003.tb03524.x ↗
14. Ivicheva, S.N., Kargin, Yu.F., Lyapina, O.A., et al., TiO2 Nanoparticles in Opal Crystals, Inorg. Mater., 2009, vol. 45, no. 11, pp. 1252–1262.10.1134/S0020168509110120 ↗
15. Ivicheva, S.N., Kargin, Yu.F., and Yurkov, G.Yu., Effect of Anions Stabilizing the Sol-Gel Synthesis of TiO2 · nH2O on the Dehydration-Induced Crystallization and Phase Transition of TiO2, 1 Vserossiiskaya konferentsiya “Zol’-gel’ 2010” (1st All-Russia Conf. Sol-Gel 2010), St. Petersburg, 2010, p. 179.